/* * Copyright 2012-2023 Advanced Micro Devices, Inc. * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. * * Authors: AMD * */ #ifndef DC_INTERFACE_H_ #define DC_INTERFACE_H_ #include "dc_types.h" #include "dc_state.h" #include "dc_plane.h" #include "grph_object_defs.h" #include "logger_types.h" #include "hdcp_msg_types.h" #include "gpio_types.h" #include "link_service_types.h" #include "grph_object_ctrl_defs.h" #include #include "hwss/hw_sequencer.h" #include "inc/compressor.h" #include "inc/hw/dmcu.h" #include "dml/display_mode_lib.h" #include "dml2/dml2_wrapper.h" #include "dmub/inc/dmub_cmd.h" #include "spl/dc_spl_types.h" struct abm_save_restore; /* forward declaration */ struct aux_payload; struct set_config_cmd_payload; struct dmub_notification; #define DC_VER "3.2.310" #define MAX_SURFACES 3 #define MAX_PLANES 6 #define MAX_STREAMS 6 #define MIN_VIEWPORT_SIZE 12 #define MAX_NUM_EDP 2 #define MAX_HOST_ROUTERS_NUM 2 /* Display Core Interfaces */ struct dc_versions { const char *dc_ver; struct dmcu_version dmcu_version; }; enum dp_protocol_version { DP_VERSION_1_4 = 0, DP_VERSION_2_1, DP_VERSION_UNKNOWN, }; enum dc_plane_type { DC_PLANE_TYPE_INVALID, DC_PLANE_TYPE_DCE_RGB, DC_PLANE_TYPE_DCE_UNDERLAY, DC_PLANE_TYPE_DCN_UNIVERSAL, }; // Sizes defined as multiples of 64KB enum det_size { DET_SIZE_DEFAULT = 0, DET_SIZE_192KB = 3, DET_SIZE_256KB = 4, DET_SIZE_320KB = 5, DET_SIZE_384KB = 6 }; struct dc_plane_cap { enum dc_plane_type type; uint32_t per_pixel_alpha : 1; struct { uint32_t argb8888 : 1; uint32_t nv12 : 1; uint32_t fp16 : 1; uint32_t p010 : 1; uint32_t ayuv : 1; } pixel_format_support; // max upscaling factor x1000 // upscaling factors are always >= 1 // for example, 1080p -> 8K is 4.0, or 4000 raw value struct { uint32_t argb8888; uint32_t nv12; uint32_t fp16; } max_upscale_factor; // max downscale factor x1000 // downscale factors are always <= 1 // for example, 8K -> 1080p is 0.25, or 250 raw value struct { uint32_t argb8888; uint32_t nv12; uint32_t fp16; } max_downscale_factor; // minimal width/height uint32_t min_width; uint32_t min_height; }; /** * DOC: color-management-caps * * **Color management caps (DPP and MPC)** * * Modules/color calculates various color operations which are translated to * abstracted HW. DCE 5-12 had almost no important changes, but starting with * DCN1, every new generation comes with fairly major differences in color * pipeline. Therefore, we abstract color pipe capabilities so modules/DM can * decide mapping to HW block based on logical capabilities. */ /** * struct rom_curve_caps - predefined transfer function caps for degamma and regamma * @srgb: RGB color space transfer func * @bt2020: BT.2020 transfer func * @gamma2_2: standard gamma * @pq: perceptual quantizer transfer function * @hlg: hybrid log–gamma transfer function */ struct rom_curve_caps { uint16_t srgb : 1; uint16_t bt2020 : 1; uint16_t gamma2_2 : 1; uint16_t pq : 1; uint16_t hlg : 1; }; /** * struct dpp_color_caps - color pipeline capabilities for display pipe and * plane blocks * * @dcn_arch: all DCE generations treated the same * @input_lut_shared: shared with DGAM. Input LUT is different than most LUTs, * just plain 256-entry lookup * @icsc: input color space conversion * @dgam_ram: programmable degamma LUT * @post_csc: post color space conversion, before gamut remap * @gamma_corr: degamma correction * @hw_3d_lut: 3D LUT support. It implies a shaper LUT before. It may be shared * with MPC by setting mpc:shared_3d_lut flag * @ogam_ram: programmable out/blend gamma LUT * @ocsc: output color space conversion * @dgam_rom_for_yuv: pre-defined degamma LUT for YUV planes * @dgam_rom_caps: pre-definied curve caps for degamma 1D LUT * @ogam_rom_caps: pre-definied curve caps for regamma 1D LUT * * Note: hdr_mult and gamut remap (CTM) are always available in DPP (in that order) */ struct dpp_color_caps { uint16_t dcn_arch : 1; uint16_t input_lut_shared : 1; uint16_t icsc : 1; uint16_t dgam_ram : 1; uint16_t post_csc : 1; uint16_t gamma_corr : 1; uint16_t hw_3d_lut : 1; uint16_t ogam_ram : 1; uint16_t ocsc : 1; uint16_t dgam_rom_for_yuv : 1; struct rom_curve_caps dgam_rom_caps; struct rom_curve_caps ogam_rom_caps; }; /** * struct mpc_color_caps - color pipeline capabilities for multiple pipe and * plane combined blocks * * @gamut_remap: color transformation matrix * @ogam_ram: programmable out gamma LUT * @ocsc: output color space conversion matrix * @num_3dluts: MPC 3D LUT; always assumes a preceding shaper LUT * @shared_3d_lut: shared 3D LUT flag. Can be either DPP or MPC, but single * instance * @ogam_rom_caps: pre-definied curve caps for regamma 1D LUT */ struct mpc_color_caps { uint16_t gamut_remap : 1; uint16_t ogam_ram : 1; uint16_t ocsc : 1; uint16_t num_3dluts : 3; uint16_t shared_3d_lut:1; struct rom_curve_caps ogam_rom_caps; }; /** * struct dc_color_caps - color pipes capabilities for DPP and MPC hw blocks * @dpp: color pipes caps for DPP * @mpc: color pipes caps for MPC */ struct dc_color_caps { struct dpp_color_caps dpp; struct mpc_color_caps mpc; }; struct dc_dmub_caps { bool psr; bool mclk_sw; bool subvp_psr; bool gecc_enable; uint8_t fams_ver; bool aux_backlight_support; }; struct dc_scl_caps { bool sharpener_support; }; struct dc_caps { uint32_t max_streams; uint32_t max_links; uint32_t max_audios; uint32_t max_slave_planes; uint32_t max_slave_yuv_planes; uint32_t max_slave_rgb_planes; uint32_t max_planes; uint32_t max_downscale_ratio; uint32_t i2c_speed_in_khz; uint32_t i2c_speed_in_khz_hdcp; uint32_t dmdata_alloc_size; unsigned int max_cursor_size; unsigned int max_video_width; /* * max video plane width that can be safely assumed to be always * supported by single DPP pipe. */ unsigned int max_optimizable_video_width; unsigned int min_horizontal_blanking_period; int linear_pitch_alignment; bool dcc_const_color; bool dynamic_audio; bool is_apu; bool dual_link_dvi; bool post_blend_color_processing; bool force_dp_tps4_for_cp2520; bool disable_dp_clk_share; bool psp_setup_panel_mode; bool extended_aux_timeout_support; bool dmcub_support; bool zstate_support; bool ips_support; uint32_t num_of_internal_disp; enum dp_protocol_version max_dp_protocol_version; unsigned int mall_size_per_mem_channel; unsigned int mall_size_total; unsigned int cursor_cache_size; struct dc_plane_cap planes[MAX_PLANES]; struct dc_color_caps color; struct dc_dmub_caps dmub_caps; bool dp_hpo; bool dp_hdmi21_pcon_support; bool edp_dsc_support; bool vbios_lttpr_aware; bool vbios_lttpr_enable; uint32_t max_otg_num; uint32_t max_cab_allocation_bytes; uint32_t cache_line_size; uint32_t cache_num_ways; uint16_t subvp_fw_processing_delay_us; uint8_t subvp_drr_max_vblank_margin_us; uint16_t subvp_prefetch_end_to_mall_start_us; uint8_t subvp_swath_height_margin_lines; // subvp start line must be aligned to 2 x swath height uint16_t subvp_pstate_allow_width_us; uint16_t subvp_vertical_int_margin_us; bool seamless_odm; uint32_t max_v_total; bool vtotal_limited_by_fp2; uint32_t max_disp_clock_khz_at_vmin; uint8_t subvp_drr_vblank_start_margin_us; bool cursor_not_scaled; bool dcmode_power_limits_present; bool sequential_ono; /* Conservative limit for DCC cases which require ODM4:1 to support*/ uint32_t dcc_plane_width_limit; struct dc_scl_caps scl_caps; }; struct dc_bug_wa { bool no_connect_phy_config; bool dedcn20_305_wa; bool skip_clock_update; bool lt_early_cr_pattern; struct { uint8_t uclk : 1; uint8_t fclk : 1; uint8_t dcfclk : 1; uint8_t dcfclk_ds: 1; } clock_update_disable_mask; bool skip_psr_ips_crtc_disable; }; struct dc_dcc_surface_param { struct dc_size surface_size; enum surface_pixel_format format; unsigned int plane0_pitch; struct dc_size plane1_size; unsigned int plane1_pitch; union { enum swizzle_mode_values swizzle_mode; enum swizzle_mode_addr3_values swizzle_mode_addr3; }; enum dc_scan_direction scan; }; struct dc_dcc_setting { unsigned int max_compressed_blk_size; unsigned int max_uncompressed_blk_size; bool independent_64b_blks; //These bitfields to be used starting with DCN 3.0 struct { uint32_t dcc_256_64_64 : 1;//available in ASICs before DCN 3.0 (the worst compression case) uint32_t dcc_128_128_uncontrained : 1; //available in ASICs before DCN 3.0 uint32_t dcc_256_128_128 : 1; //available starting with DCN 3.0 uint32_t dcc_256_256_unconstrained : 1; //available in ASICs before DCN 3.0 (the best compression case) uint32_t dcc_256_256 : 1; //available in ASICs starting with DCN 4.0x (the best compression case) uint32_t dcc_256_128 : 1; //available in ASICs starting with DCN 4.0x uint32_t dcc_256_64 : 1; //available in ASICs starting with DCN 4.0x (the worst compression case) } dcc_controls; }; struct dc_surface_dcc_cap { union { struct { struct dc_dcc_setting rgb; } grph; struct { struct dc_dcc_setting luma; struct dc_dcc_setting chroma; } video; }; bool capable; bool const_color_support; }; struct dc_static_screen_params { struct { bool force_trigger; bool cursor_update; bool surface_update; bool overlay_update; } triggers; unsigned int num_frames; }; /* Surface update type is used by dc_update_surfaces_and_stream * The update type is determined at the very beginning of the function based * on parameters passed in and decides how much programming (or updating) is * going to be done during the call. * * UPDATE_TYPE_FAST is used for really fast updates that do not require much * logical calculations or hardware register programming. This update MUST be * ISR safe on windows. Currently fast update will only be used to flip surface * address. * * UPDATE_TYPE_MED is used for slower updates which require significant hw * re-programming however do not affect bandwidth consumption or clock * requirements. At present, this is the level at which front end updates * that do not require us to run bw_calcs happen. These are in/out transfer func * updates, viewport offset changes, recout size changes and pixel depth changes. * This update can be done at ISR, but we want to minimize how often this happens. * * UPDATE_TYPE_FULL is slow. Really slow. This requires us to recalculate our * bandwidth and clocks, possibly rearrange some pipes and reprogram anything front * end related. Any time viewport dimensions, recout dimensions, scaling ratios or * gamma need to be adjusted or pipe needs to be turned on (or disconnected) we do * a full update. This cannot be done at ISR level and should be a rare event. * Unless someone is stress testing mpo enter/exit, playing with colour or adjusting * underscan we don't expect to see this call at all. */ enum surface_update_type { UPDATE_TYPE_FAST, /* super fast, safe to execute in isr */ UPDATE_TYPE_MED, /* ISR safe, most of programming needed, no bw/clk change*/ UPDATE_TYPE_FULL, /* may need to shuffle resources */ }; /* Forward declaration*/ struct dc; struct dc_plane_state; struct dc_state; struct dc_cap_funcs { bool (*get_dcc_compression_cap)(const struct dc *dc, const struct dc_dcc_surface_param *input, struct dc_surface_dcc_cap *output); bool (*get_subvp_en)(struct dc *dc, struct dc_state *context); }; struct link_training_settings; union allow_lttpr_non_transparent_mode { struct { bool DP1_4A : 1; bool DP2_0 : 1; } bits; unsigned char raw; }; /* Structure to hold configuration flags set by dm at dc creation. */ struct dc_config { bool gpu_vm_support; bool disable_disp_pll_sharing; bool fbc_support; bool disable_fractional_pwm; bool allow_seamless_boot_optimization; bool seamless_boot_edp_requested; bool edp_not_connected; bool edp_no_power_sequencing; bool force_enum_edp; bool forced_clocks; union allow_lttpr_non_transparent_mode allow_lttpr_non_transparent_mode; bool multi_mon_pp_mclk_switch; bool disable_dmcu; bool enable_4to1MPC; bool enable_windowed_mpo_odm; bool forceHBR2CP2520; // Used for switching between test patterns TPS4 and CP2520 uint32_t allow_edp_hotplug_detection; bool clamp_min_dcfclk; uint64_t vblank_alignment_dto_params; uint8_t vblank_alignment_max_frame_time_diff; bool is_asymmetric_memory; bool is_single_rank_dimm; bool is_vmin_only_asic; bool use_spl; bool prefer_easf; bool use_pipe_ctx_sync_logic; bool ignore_dpref_ss; bool enable_mipi_converter_optimization; bool use_default_clock_table; bool force_bios_enable_lttpr; uint8_t force_bios_fixed_vs; int sdpif_request_limit_words_per_umc; bool dc_mode_clk_limit_support; bool EnableMinDispClkODM; bool enable_auto_dpm_test_logs; unsigned int disable_ips; unsigned int disable_ips_in_vpb; bool usb4_bw_alloc_support; bool allow_0_dtb_clk; bool use_assr_psp_message; bool support_edp0_on_dp1; unsigned int enable_fpo_flicker_detection; bool disable_hbr_audio_dp2; bool consolidated_dpia_dp_lt; bool set_pipe_unlock_order; }; enum visual_confirm { VISUAL_CONFIRM_DISABLE = 0, VISUAL_CONFIRM_SURFACE = 1, VISUAL_CONFIRM_HDR = 2, VISUAL_CONFIRM_MPCTREE = 4, VISUAL_CONFIRM_PSR = 5, VISUAL_CONFIRM_SWAPCHAIN = 6, VISUAL_CONFIRM_FAMS = 7, VISUAL_CONFIRM_SWIZZLE = 9, VISUAL_CONFIRM_REPLAY = 12, VISUAL_CONFIRM_SUBVP = 14, VISUAL_CONFIRM_MCLK_SWITCH = 16, VISUAL_CONFIRM_FAMS2 = 19, VISUAL_CONFIRM_HW_CURSOR = 20, }; enum dc_psr_power_opts { psr_power_opt_invalid = 0x0, psr_power_opt_smu_opt_static_screen = 0x1, psr_power_opt_z10_static_screen = 0x10, psr_power_opt_ds_disable_allow = 0x100, }; enum dml_hostvm_override_opts { DML_HOSTVM_NO_OVERRIDE = 0x0, DML_HOSTVM_OVERRIDE_FALSE = 0x1, DML_HOSTVM_OVERRIDE_TRUE = 0x2, }; enum dc_replay_power_opts { replay_power_opt_invalid = 0x0, replay_power_opt_smu_opt_static_screen = 0x1, replay_power_opt_z10_static_screen = 0x10, }; enum dcc_option { DCC_ENABLE = 0, DCC_DISABLE = 1, DCC_HALF_REQ_DISALBE = 2, }; enum in_game_fams_config { INGAME_FAMS_SINGLE_DISP_ENABLE, // enable in-game fams INGAME_FAMS_DISABLE, // disable in-game fams INGAME_FAMS_MULTI_DISP_ENABLE, //enable in-game fams for multi-display INGAME_FAMS_MULTI_DISP_CLAMPED_ONLY, //enable in-game fams for multi-display only for clamped RR strategies }; /** * enum pipe_split_policy - Pipe split strategy supported by DCN * * This enum is used to define the pipe split policy supported by DCN. By * default, DC favors MPC_SPLIT_DYNAMIC. */ enum pipe_split_policy { /** * @MPC_SPLIT_DYNAMIC: DC will automatically decide how to split the * pipe in order to bring the best trade-off between performance and * power consumption. This is the recommended option. */ MPC_SPLIT_DYNAMIC = 0, /** * @MPC_SPLIT_AVOID: Avoid pipe split, which means that DC will not * try any sort of split optimization. */ MPC_SPLIT_AVOID = 1, /** * @MPC_SPLIT_AVOID_MULT_DISP: With this option, DC will only try to * optimize the pipe utilization when using a single display; if the * user connects to a second display, DC will avoid pipe split. */ MPC_SPLIT_AVOID_MULT_DISP = 2, }; enum wm_report_mode { WM_REPORT_DEFAULT = 0, WM_REPORT_OVERRIDE = 1, }; enum dtm_pstate{ dtm_level_p0 = 0,/*highest voltage*/ dtm_level_p1, dtm_level_p2, dtm_level_p3, dtm_level_p4,/*when active_display_count = 0*/ }; enum dcn_pwr_state { DCN_PWR_STATE_UNKNOWN = -1, DCN_PWR_STATE_MISSION_MODE = 0, DCN_PWR_STATE_LOW_POWER = 3, }; enum dcn_zstate_support_state { DCN_ZSTATE_SUPPORT_UNKNOWN, DCN_ZSTATE_SUPPORT_ALLOW, DCN_ZSTATE_SUPPORT_ALLOW_Z8_ONLY, DCN_ZSTATE_SUPPORT_ALLOW_Z8_Z10_ONLY, DCN_ZSTATE_SUPPORT_ALLOW_Z10_ONLY, DCN_ZSTATE_SUPPORT_DISALLOW, }; /* * struct dc_clocks - DC pipe clocks * * For any clocks that may differ per pipe only the max is stored in this * structure */ struct dc_clocks { int dispclk_khz; int actual_dispclk_khz; int dppclk_khz; int actual_dppclk_khz; int disp_dpp_voltage_level_khz; int dcfclk_khz; int socclk_khz; int dcfclk_deep_sleep_khz; int fclk_khz; int phyclk_khz; int dramclk_khz; bool p_state_change_support; enum dcn_zstate_support_state zstate_support; bool dtbclk_en; int ref_dtbclk_khz; bool fclk_p_state_change_support; enum dcn_pwr_state pwr_state; /* * Elements below are not compared for the purposes of * optimization required */ bool prev_p_state_change_support; bool fclk_prev_p_state_change_support; int num_ways; int host_router_bw_kbps[MAX_HOST_ROUTERS_NUM]; /* * @fw_based_mclk_switching * * DC has a mechanism that leverage the variable refresh rate to switch * memory clock in cases that we have a large latency to achieve the * memory clock change and a short vblank window. DC has some * requirements to enable this feature, and this field describes if the * system support or not such a feature. */ bool fw_based_mclk_switching; bool fw_based_mclk_switching_shut_down; int prev_num_ways; enum dtm_pstate dtm_level; int max_supported_dppclk_khz; int max_supported_dispclk_khz; int bw_dppclk_khz; /*a copy of dppclk_khz*/ int bw_dispclk_khz; int idle_dramclk_khz; int idle_fclk_khz; }; struct dc_bw_validation_profile { bool enable; unsigned long long total_ticks; unsigned long long voltage_level_ticks; unsigned long long watermark_ticks; unsigned long long rq_dlg_ticks; unsigned long long total_count; unsigned long long skip_fast_count; unsigned long long skip_pass_count; unsigned long long skip_fail_count; }; #define BW_VAL_TRACE_SETUP() \ unsigned long long end_tick = 0; \ unsigned long long voltage_level_tick = 0; \ unsigned long long watermark_tick = 0; \ unsigned long long start_tick = dc->debug.bw_val_profile.enable ? \ dm_get_timestamp(dc->ctx) : 0 #define BW_VAL_TRACE_COUNT() \ if (dc->debug.bw_val_profile.enable) \ dc->debug.bw_val_profile.total_count++ #define BW_VAL_TRACE_SKIP(status) \ if (dc->debug.bw_val_profile.enable) { \ if (!voltage_level_tick) \ voltage_level_tick = dm_get_timestamp(dc->ctx); \ dc->debug.bw_val_profile.skip_ ## status ## _count++; \ } #define BW_VAL_TRACE_END_VOLTAGE_LEVEL() \ if (dc->debug.bw_val_profile.enable) \ voltage_level_tick = dm_get_timestamp(dc->ctx) #define BW_VAL_TRACE_END_WATERMARKS() \ if (dc->debug.bw_val_profile.enable) \ watermark_tick = dm_get_timestamp(dc->ctx) #define BW_VAL_TRACE_FINISH() \ if (dc->debug.bw_val_profile.enable) { \ end_tick = dm_get_timestamp(dc->ctx); \ dc->debug.bw_val_profile.total_ticks += end_tick - start_tick; \ dc->debug.bw_val_profile.voltage_level_ticks += voltage_level_tick - start_tick; \ if (watermark_tick) { \ dc->debug.bw_val_profile.watermark_ticks += watermark_tick - voltage_level_tick; \ dc->debug.bw_val_profile.rq_dlg_ticks += end_tick - watermark_tick; \ } \ } union mem_low_power_enable_options { struct { bool vga: 1; bool i2c: 1; bool dmcu: 1; bool dscl: 1; bool cm: 1; bool mpc: 1; bool optc: 1; bool vpg: 1; bool afmt: 1; } bits; uint32_t u32All; }; union root_clock_optimization_options { struct { bool dpp: 1; bool dsc: 1; bool hdmistream: 1; bool hdmichar: 1; bool dpstream: 1; bool symclk32_se: 1; bool symclk32_le: 1; bool symclk_fe: 1; bool physymclk: 1; bool dpiasymclk: 1; uint32_t reserved: 22; } bits; uint32_t u32All; }; union fine_grain_clock_gating_enable_options { struct { bool dccg_global_fgcg_rep : 1; /* Global fine grain clock gating of repeaters */ bool dchub : 1; /* Display controller hub */ bool dchubbub : 1; bool dpp : 1; /* Display pipes and planes */ bool opp : 1; /* Output pixel processing */ bool optc : 1; /* Output pipe timing combiner */ bool dio : 1; /* Display output */ bool dwb : 1; /* Display writeback */ bool mmhubbub : 1; /* Multimedia hub */ bool dmu : 1; /* Display core management unit */ bool az : 1; /* Azalia */ bool dchvm : 1; bool dsc : 1; /* Display stream compression */ uint32_t reserved : 19; } bits; uint32_t u32All; }; enum pg_hw_pipe_resources { PG_HUBP = 0, PG_DPP, PG_DSC, PG_MPCC, PG_OPP, PG_OPTC, PG_DPSTREAM, PG_HDMISTREAM, PG_PHYSYMCLK, PG_HW_PIPE_RESOURCES_NUM_ELEMENT }; enum pg_hw_resources { PG_DCCG = 0, PG_DCIO, PG_DIO, PG_DCHUBBUB, PG_DCHVM, PG_DWB, PG_HPO, PG_HW_RESOURCES_NUM_ELEMENT }; struct pg_block_update { bool pg_pipe_res_update[PG_HW_PIPE_RESOURCES_NUM_ELEMENT][MAX_PIPES]; bool pg_res_update[PG_HW_RESOURCES_NUM_ELEMENT]; }; union dpia_debug_options { struct { uint32_t disable_dpia:1; /* bit 0 */ uint32_t force_non_lttpr:1; /* bit 1 */ uint32_t extend_aux_rd_interval:1; /* bit 2 */ uint32_t disable_mst_dsc_work_around:1; /* bit 3 */ uint32_t enable_force_tbt3_work_around:1; /* bit 4 */ uint32_t disable_usb4_pm_support:1; /* bit 5 */ uint32_t enable_consolidated_dpia_dp_lt:1; /* bit 6 */ uint32_t reserved:25; } bits; uint32_t raw; }; /* AUX wake work around options * 0: enable/disable work around * 1: use default timeout LINK_AUX_WAKE_TIMEOUT_MS * 15-2: reserved * 31-16: timeout in ms */ union aux_wake_wa_options { struct { uint32_t enable_wa : 1; uint32_t use_default_timeout : 1; uint32_t rsvd: 14; uint32_t timeout_ms : 16; } bits; uint32_t raw; }; struct dc_debug_data { uint32_t ltFailCount; uint32_t i2cErrorCount; uint32_t auxErrorCount; }; struct dc_phy_addr_space_config { struct { uint64_t start_addr; uint64_t end_addr; uint64_t fb_top; uint64_t fb_offset; uint64_t fb_base; uint64_t agp_top; uint64_t agp_bot; uint64_t agp_base; } system_aperture; struct { uint64_t page_table_start_addr; uint64_t page_table_end_addr; uint64_t page_table_base_addr; bool base_addr_is_mc_addr; } gart_config; bool valid; bool is_hvm_enabled; uint64_t page_table_default_page_addr; }; struct dc_virtual_addr_space_config { uint64_t page_table_base_addr; uint64_t page_table_start_addr; uint64_t page_table_end_addr; uint32_t page_table_block_size_in_bytes; uint8_t page_table_depth; // 1 = 1 level, 2 = 2 level, etc. 0 = invalid }; struct dc_bounding_box_overrides { int sr_exit_time_ns; int sr_enter_plus_exit_time_ns; int sr_exit_z8_time_ns; int sr_enter_plus_exit_z8_time_ns; int urgent_latency_ns; int percent_of_ideal_drambw; int dram_clock_change_latency_ns; int dummy_clock_change_latency_ns; int fclk_clock_change_latency_ns; /* This forces a hard min on the DCFCLK we use * for DML. Unlike the debug option for forcing * DCFCLK, this override affects watermark calculations */ int min_dcfclk_mhz; }; struct dc_state; struct resource_pool; struct dce_hwseq; struct link_service; /* * struct dc_debug_options - DC debug struct * * This struct provides a simple mechanism for developers to change some * configurations, enable/disable features, and activate extra debug options. * This can be very handy to narrow down whether some specific feature is * causing an issue or not. */ struct dc_debug_options { bool native422_support; bool disable_dsc; enum visual_confirm visual_confirm; int visual_confirm_rect_height; bool sanity_checks; bool max_disp_clk; bool surface_trace; bool clock_trace; bool validation_trace; bool bandwidth_calcs_trace; int max_downscale_src_width; /* stutter efficiency related */ bool disable_stutter; bool use_max_lb; enum dcc_option disable_dcc; /* * @pipe_split_policy: Define which pipe split policy is used by the * display core. */ enum pipe_split_policy pipe_split_policy; bool force_single_disp_pipe_split; bool voltage_align_fclk; bool disable_min_fclk; bool disable_dfs_bypass; bool disable_dpp_power_gate; bool disable_hubp_power_gate; bool disable_dsc_power_gate; bool disable_optc_power_gate; bool disable_hpo_power_gate; int dsc_min_slice_height_override; int dsc_bpp_increment_div; bool disable_pplib_wm_range; enum wm_report_mode pplib_wm_report_mode; unsigned int min_disp_clk_khz; unsigned int min_dpp_clk_khz; unsigned int min_dram_clk_khz; int sr_exit_time_dpm0_ns; int sr_enter_plus_exit_time_dpm0_ns; int sr_exit_time_ns; int sr_enter_plus_exit_time_ns; int sr_exit_z8_time_ns; int sr_enter_plus_exit_z8_time_ns; int urgent_latency_ns; uint32_t underflow_assert_delay_us; int percent_of_ideal_drambw; int dram_clock_change_latency_ns; bool optimized_watermark; int always_scale; bool disable_pplib_clock_request; bool disable_clock_gate; bool disable_mem_low_power; bool pstate_enabled; bool disable_dmcu; bool force_abm_enable; bool disable_stereo_support; bool vsr_support; bool performance_trace; bool az_endpoint_mute_only; bool always_use_regamma; bool recovery_enabled; bool avoid_vbios_exec_table; bool scl_reset_length10; bool hdmi20_disable; bool skip_detection_link_training; uint32_t edid_read_retry_times; unsigned int force_odm_combine; //bit vector based on otg inst unsigned int seamless_boot_odm_combine; unsigned int force_odm_combine_4to1; //bit vector based on otg inst int minimum_z8_residency_time; int minimum_z10_residency_time; bool disable_z9_mpc; unsigned int force_fclk_khz; bool enable_tri_buf; bool ips_disallow_entry; bool dmub_offload_enabled; bool dmcub_emulation; bool disable_idle_power_optimizations; unsigned int mall_size_override; unsigned int mall_additional_timer_percent; bool mall_error_as_fatal; bool dmub_command_table; /* for testing only */ struct dc_bw_validation_profile bw_val_profile; bool disable_fec; bool disable_48mhz_pwrdwn; /* This forces a hard min on the DCFCLK requested to SMU/PP * watermarks are not affected. */ unsigned int force_min_dcfclk_mhz; int dwb_fi_phase; bool disable_timing_sync; bool cm_in_bypass; int force_clock_mode;/*every mode change.*/ bool disable_dram_clock_change_vactive_support; bool validate_dml_output; bool enable_dmcub_surface_flip; bool usbc_combo_phy_reset_wa; bool enable_dram_clock_change_one_display_vactive; /* TODO - remove once tested */ bool legacy_dp2_lt; bool set_mst_en_for_sst; bool disable_uhbr; bool force_dp2_lt_fallback_method; bool ignore_cable_id; union mem_low_power_enable_options enable_mem_low_power; union root_clock_optimization_options root_clock_optimization; union fine_grain_clock_gating_enable_options enable_fine_grain_clock_gating; bool hpo_optimization; bool force_vblank_alignment; /* Enable dmub aux for legacy ddc */ bool enable_dmub_aux_for_legacy_ddc; bool disable_fams; enum in_game_fams_config disable_fams_gaming; /* FEC/PSR1 sequence enable delay in 100us */ uint8_t fec_enable_delay_in100us; bool enable_driver_sequence_debug; enum det_size crb_alloc_policy; int crb_alloc_policy_min_disp_count; bool disable_z10; bool enable_z9_disable_interface; bool psr_skip_crtc_disable; uint32_t ips_skip_crtc_disable_mask; union dpia_debug_options dpia_debug; bool disable_fixed_vs_aux_timeout_wa; uint32_t fixed_vs_aux_delay_config_wa; bool force_disable_subvp; bool force_subvp_mclk_switch; bool allow_sw_cursor_fallback; unsigned int force_subvp_num_ways; unsigned int force_mall_ss_num_ways; bool alloc_extra_way_for_cursor; uint32_t subvp_extra_lines; bool force_usr_allow; /* uses value at boot and disables switch */ bool disable_dtb_ref_clk_switch; bool extended_blank_optimization; union aux_wake_wa_options aux_wake_wa; uint32_t mst_start_top_delay; uint8_t psr_power_use_phy_fsm; enum dml_hostvm_override_opts dml_hostvm_override; bool dml_disallow_alternate_prefetch_modes; bool use_legacy_soc_bb_mechanism; bool exit_idle_opt_for_cursor_updates; bool using_dml2; bool enable_single_display_2to1_odm_policy; bool enable_double_buffered_dsc_pg_support; bool enable_dp_dig_pixel_rate_div_policy; bool using_dml21; enum lttpr_mode lttpr_mode_override; unsigned int dsc_delay_factor_wa_x1000; unsigned int min_prefetch_in_strobe_ns; bool disable_unbounded_requesting; bool dig_fifo_off_in_blank; bool override_dispclk_programming; bool otg_crc_db; bool disallow_dispclk_dppclk_ds; bool disable_fpo_optimizations; bool support_eDP1_5; uint32_t fpo_vactive_margin_us; bool disable_fpo_vactive; bool disable_boot_optimizations; bool override_odm_optimization; bool minimize_dispclk_using_odm; bool disable_subvp_high_refresh; bool disable_dp_plus_plus_wa; uint32_t fpo_vactive_min_active_margin_us; uint32_t fpo_vactive_max_blank_us; bool enable_hpo_pg_support; bool enable_legacy_fast_update; bool disable_dc_mode_overwrite; bool replay_skip_crtc_disabled; bool ignore_pg;/*do nothing, let pmfw control it*/ bool psp_disabled_wa; unsigned int ips2_eval_delay_us; unsigned int ips2_entry_delay_us; bool optimize_ips_handshake; bool disable_dmub_reallow_idle; bool disable_timeout; bool disable_extblankadj; bool enable_idle_reg_checks; unsigned int static_screen_wait_frames; uint32_t pwm_freq; bool force_chroma_subsampling_1tap; unsigned int dcc_meta_propagation_delay_us; bool disable_422_left_edge_pixel; bool dml21_force_pstate_method; uint32_t dml21_force_pstate_method_values[MAX_PIPES]; uint32_t dml21_disable_pstate_method_mask; union dmub_fams2_global_feature_config fams2_config; bool enable_legacy_clock_update; unsigned int force_cositing; unsigned int disable_spl; unsigned int force_easf; unsigned int force_sharpness; unsigned int force_sharpness_level; unsigned int force_lls; bool notify_dpia_hr_bw; bool enable_ips_visual_confirm; unsigned int sharpen_policy; unsigned int scale_to_sharpness_policy; bool skip_full_updated_if_possible; unsigned int enable_oled_edp_power_up_opt; bool enable_hblank_borrow; }; /* Generic structure that can be used to query properties of DC. More fields * can be added as required. */ struct dc_current_properties { unsigned int cursor_size_limit; }; enum frame_buffer_mode { FRAME_BUFFER_MODE_LOCAL_ONLY = 0, FRAME_BUFFER_MODE_ZFB_ONLY, FRAME_BUFFER_MODE_MIXED_ZFB_AND_LOCAL, } ; struct dchub_init_data { int64_t zfb_phys_addr_base; int64_t zfb_mc_base_addr; uint64_t zfb_size_in_byte; enum frame_buffer_mode fb_mode; bool dchub_initialzied; bool dchub_info_valid; }; struct dml2_soc_bb; struct dc_init_data { struct hw_asic_id asic_id; void *driver; /* ctx */ struct cgs_device *cgs_device; struct dc_bounding_box_overrides bb_overrides; int num_virtual_links; /* * If 'vbios_override' not NULL, it will be called instead * of the real VBIOS. Intended use is Diagnostics on FPGA. */ struct dc_bios *vbios_override; enum dce_environment dce_environment; struct dmub_offload_funcs *dmub_if; struct dc_reg_helper_state *dmub_offload; struct dc_config flags; uint64_t log_mask; struct dpcd_vendor_signature vendor_signature; bool force_smu_not_present; /* * IP offset for run time initializaion of register addresses * * DCN3.5+ will fail dc_create() if these fields are null for them. They are * applicable starting with DCN32/321 and are not used for ASICs upstreamed * before them. */ uint32_t *dcn_reg_offsets; uint32_t *nbio_reg_offsets; uint32_t *clk_reg_offsets; struct dml2_soc_bb *bb_from_dmub; }; struct dc_callback_init { struct cp_psp cp_psp; }; struct dc *dc_create(const struct dc_init_data *init_params); void dc_hardware_init(struct dc *dc); int dc_get_vmid_use_vector(struct dc *dc); void dc_setup_vm_context(struct dc *dc, struct dc_virtual_addr_space_config *va_config, int vmid); /* Returns the number of vmids supported */ int dc_setup_system_context(struct dc *dc, struct dc_phy_addr_space_config *pa_config); void dc_init_callbacks(struct dc *dc, const struct dc_callback_init *init_params); void dc_deinit_callbacks(struct dc *dc); void dc_destroy(struct dc **dc); /* Surface Interfaces */ enum { TRANSFER_FUNC_POINTS = 1025 }; struct dc_hdr_static_metadata { /* display chromaticities and white point in units of 0.00001 */ unsigned int chromaticity_green_x; unsigned int chromaticity_green_y; unsigned int chromaticity_blue_x; unsigned int chromaticity_blue_y; unsigned int chromaticity_red_x; unsigned int chromaticity_red_y; unsigned int chromaticity_white_point_x; unsigned int chromaticity_white_point_y; uint32_t min_luminance; uint32_t max_luminance; uint32_t maximum_content_light_level; uint32_t maximum_frame_average_light_level; }; enum dc_transfer_func_type { TF_TYPE_PREDEFINED, TF_TYPE_DISTRIBUTED_POINTS, TF_TYPE_BYPASS, TF_TYPE_HWPWL }; struct dc_transfer_func_distributed_points { struct fixed31_32 red[TRANSFER_FUNC_POINTS]; struct fixed31_32 green[TRANSFER_FUNC_POINTS]; struct fixed31_32 blue[TRANSFER_FUNC_POINTS]; uint16_t end_exponent; uint16_t x_point_at_y1_red; uint16_t x_point_at_y1_green; uint16_t x_point_at_y1_blue; }; enum dc_transfer_func_predefined { TRANSFER_FUNCTION_SRGB, TRANSFER_FUNCTION_BT709, TRANSFER_FUNCTION_PQ, TRANSFER_FUNCTION_LINEAR, TRANSFER_FUNCTION_UNITY, TRANSFER_FUNCTION_HLG, TRANSFER_FUNCTION_HLG12, TRANSFER_FUNCTION_GAMMA22, TRANSFER_FUNCTION_GAMMA24, TRANSFER_FUNCTION_GAMMA26 }; struct dc_transfer_func { struct kref refcount; enum dc_transfer_func_type type; enum dc_transfer_func_predefined tf; /* FP16 1.0 reference level in nits, default is 80 nits, only for PQ*/ uint32_t sdr_ref_white_level; union { struct pwl_params pwl; struct dc_transfer_func_distributed_points tf_pts; }; }; union dc_3dlut_state { struct { uint32_t initialized:1; /*if 3dlut is went through color module for initialization */ uint32_t rmu_idx_valid:1; /*if mux settings are valid*/ uint32_t rmu_mux_num:3; /*index of mux to use*/ uint32_t mpc_rmu0_mux:4; /*select mpcc on mux, one of the following : mpcc0, mpcc1, mpcc2, mpcc3*/ uint32_t mpc_rmu1_mux:4; uint32_t mpc_rmu2_mux:4; uint32_t reserved:15; } bits; uint32_t raw; }; struct dc_3dlut { struct kref refcount; struct tetrahedral_params lut_3d; struct fixed31_32 hdr_multiplier; union dc_3dlut_state state; }; /* * This structure is filled in by dc_surface_get_status and contains * the last requested address and the currently active address so the called * can determine if there are any outstanding flips */ struct dc_plane_status { struct dc_plane_address requested_address; struct dc_plane_address current_address; bool is_flip_pending; bool is_right_eye; }; union surface_update_flags { struct { uint32_t addr_update:1; /* Medium updates */ uint32_t dcc_change:1; uint32_t color_space_change:1; uint32_t horizontal_mirror_change:1; uint32_t per_pixel_alpha_change:1; uint32_t global_alpha_change:1; uint32_t hdr_mult:1; uint32_t rotation_change:1; uint32_t swizzle_change:1; uint32_t scaling_change:1; uint32_t position_change:1; uint32_t in_transfer_func_change:1; uint32_t input_csc_change:1; uint32_t coeff_reduction_change:1; uint32_t output_tf_change:1; uint32_t pixel_format_change:1; uint32_t plane_size_change:1; uint32_t gamut_remap_change:1; /* Full updates */ uint32_t new_plane:1; uint32_t bpp_change:1; uint32_t gamma_change:1; uint32_t bandwidth_change:1; uint32_t clock_change:1; uint32_t stereo_format_change:1; uint32_t lut_3d:1; uint32_t tmz_changed:1; uint32_t mcm_transfer_function_enable_change:1; /* disable or enable MCM transfer func */ uint32_t full_update:1; uint32_t sdr_white_level_nits:1; } bits; uint32_t raw; }; #define DC_REMOVE_PLANE_POINTERS 1 struct dc_plane_state { struct dc_plane_address address; struct dc_plane_flip_time time; bool triplebuffer_flips; struct scaling_taps scaling_quality; struct rect src_rect; struct rect dst_rect; struct rect clip_rect; struct plane_size plane_size; union dc_tiling_info tiling_info; struct dc_plane_dcc_param dcc; struct dc_gamma gamma_correction; struct dc_transfer_func in_transfer_func; struct dc_bias_and_scale bias_and_scale; struct dc_csc_transform input_csc_color_matrix; struct fixed31_32 coeff_reduction_factor; struct fixed31_32 hdr_mult; struct colorspace_transform gamut_remap_matrix; // TODO: No longer used, remove struct dc_hdr_static_metadata hdr_static_ctx; enum dc_color_space color_space; struct dc_3dlut lut3d_func; struct dc_transfer_func in_shaper_func; struct dc_transfer_func blend_tf; struct dc_transfer_func *gamcor_tf; enum surface_pixel_format format; enum dc_rotation_angle rotation; enum plane_stereo_format stereo_format; bool is_tiling_rotated; bool per_pixel_alpha; bool pre_multiplied_alpha; bool global_alpha; int global_alpha_value; bool visible; bool flip_immediate; bool horizontal_mirror; int layer_index; union surface_update_flags update_flags; bool flip_int_enabled; bool skip_manual_trigger; /* private to DC core */ struct dc_plane_status status; struct dc_context *ctx; /* HACK: Workaround for forcing full reprogramming under some conditions */ bool force_full_update; bool is_phantom; // TODO: Change mall_stream_config into mall_plane_config instead /* private to dc_surface.c */ enum dc_irq_source irq_source; struct kref refcount; struct tg_color visual_confirm_color; bool is_statically_allocated; enum chroma_cositing cositing; enum dc_cm2_shaper_3dlut_setting mcm_shaper_3dlut_setting; bool mcm_lut1d_enable; struct dc_cm2_func_luts mcm_luts; bool lut_bank_a; enum mpcc_movable_cm_location mcm_location; struct dc_csc_transform cursor_csc_color_matrix; bool adaptive_sharpness_en; int adaptive_sharpness_policy; int sharpness_level; enum linear_light_scaling linear_light_scaling; unsigned int sdr_white_level_nits; }; struct dc_plane_info { struct plane_size plane_size; union dc_tiling_info tiling_info; struct dc_plane_dcc_param dcc; enum surface_pixel_format format; enum dc_rotation_angle rotation; enum plane_stereo_format stereo_format; enum dc_color_space color_space; bool horizontal_mirror; bool visible; bool per_pixel_alpha; bool pre_multiplied_alpha; bool global_alpha; int global_alpha_value; bool input_csc_enabled; int layer_index; enum chroma_cositing cositing; }; #include "dc_stream.h" struct dc_scratch_space { /* used to temporarily backup plane states of a stream during * dc update. The reason is that plane states are overwritten * with surface updates in dc update. Once they are overwritten * current state is no longer valid. We want to temporarily * store current value in plane states so we can still recover * a valid current state during dc update. */ struct dc_plane_state plane_states[MAX_SURFACE_NUM]; struct dc_stream_state stream_state; }; struct dc { struct dc_debug_options debug; struct dc_versions versions; struct dc_caps caps; struct dc_cap_funcs cap_funcs; struct dc_config config; struct dc_bounding_box_overrides bb_overrides; struct dc_bug_wa work_arounds; struct dc_context *ctx; struct dc_phy_addr_space_config vm_pa_config; uint8_t link_count; struct dc_link *links[MAX_LINKS]; struct link_service *link_srv; struct dc_state *current_state; struct resource_pool *res_pool; struct clk_mgr *clk_mgr; /* Display Engine Clock levels */ struct dm_pp_clock_levels sclk_lvls; /* Inputs into BW and WM calculations. */ struct bw_calcs_dceip *bw_dceip; struct bw_calcs_vbios *bw_vbios; struct dcn_soc_bounding_box *dcn_soc; struct dcn_ip_params *dcn_ip; struct display_mode_lib dml; /* HW functions */ struct hw_sequencer_funcs hwss; struct dce_hwseq *hwseq; /* Require to optimize clocks and bandwidth for added/removed planes */ bool optimized_required; bool wm_optimized_required; bool idle_optimizations_allowed; bool enable_c20_dtm_b0; /* Require to maintain clocks and bandwidth for UEFI enabled HW */ /* FBC compressor */ struct compressor *fbc_compressor; struct dc_debug_data debug_data; struct dpcd_vendor_signature vendor_signature; const char *build_id; struct vm_helper *vm_helper; uint32_t *dcn_reg_offsets; uint32_t *nbio_reg_offsets; uint32_t *clk_reg_offsets; /* Scratch memory */ struct { struct { /* * For matching clock_limits table in driver with table * from PMFW. */ struct _vcs_dpi_voltage_scaling_st clock_limits[DC__VOLTAGE_STATES]; } update_bw_bounding_box; struct dc_scratch_space current_state; struct dc_scratch_space new_state; struct dc_stream_state temp_stream; // Used so we don't need to allocate stream on the stack bool pipes_to_unlock_first[MAX_PIPES]; /* Any of the pipes indicated here should be unlocked first */ } scratch; struct dml2_configuration_options dml2_options; struct dml2_configuration_options dml2_tmp; enum dc_acpi_cm_power_state power_state; }; struct dc_scaling_info { struct rect src_rect; struct rect dst_rect; struct rect clip_rect; struct scaling_taps scaling_quality; }; struct dc_fast_update { const struct dc_flip_addrs *flip_addr; const struct dc_gamma *gamma; const struct colorspace_transform *gamut_remap_matrix; const struct dc_csc_transform *input_csc_color_matrix; const struct fixed31_32 *coeff_reduction_factor; struct dc_transfer_func *out_transfer_func; struct dc_csc_transform *output_csc_transform; const struct dc_csc_transform *cursor_csc_color_matrix; }; struct dc_surface_update { struct dc_plane_state *surface; /* isr safe update parameters. null means no updates */ const struct dc_flip_addrs *flip_addr; const struct dc_plane_info *plane_info; const struct dc_scaling_info *scaling_info; struct fixed31_32 hdr_mult; /* following updates require alloc/sleep/spin that is not isr safe, * null means no updates */ const struct dc_gamma *gamma; const struct dc_transfer_func *in_transfer_func; const struct dc_csc_transform *input_csc_color_matrix; const struct fixed31_32 *coeff_reduction_factor; const struct dc_transfer_func *func_shaper; const struct dc_3dlut *lut3d_func; const struct dc_transfer_func *blend_tf; const struct colorspace_transform *gamut_remap_matrix; /* * Color Transformations for pre-blend MCM (Shaper, 3DLUT, 1DLUT) * * change cm2_params.component_settings: Full update * change cm2_params.cm2_luts: Fast update */ const struct dc_cm2_parameters *cm2_params; const struct dc_csc_transform *cursor_csc_color_matrix; unsigned int sdr_white_level_nits; }; /* * Create a new surface with default parameters; */ void dc_gamma_retain(struct dc_gamma *dc_gamma); void dc_gamma_release(struct dc_gamma **dc_gamma); struct dc_gamma *dc_create_gamma(void); void dc_transfer_func_retain(struct dc_transfer_func *dc_tf); void dc_transfer_func_release(struct dc_transfer_func *dc_tf); struct dc_transfer_func *dc_create_transfer_func(void); struct dc_3dlut *dc_create_3dlut_func(void); void dc_3dlut_func_release(struct dc_3dlut *lut); void dc_3dlut_func_retain(struct dc_3dlut *lut); void dc_post_update_surfaces_to_stream( struct dc *dc); #include "dc_stream.h" /** * struct dc_validation_set - Struct to store surface/stream associations for validation */ struct dc_validation_set { /** * @stream: Stream state properties */ struct dc_stream_state *stream; /** * @plane_states: Surface state */ struct dc_plane_state *plane_states[MAX_SURFACES]; /** * @plane_count: Total of active planes */ uint8_t plane_count; }; bool dc_validate_boot_timing(const struct dc *dc, const struct dc_sink *sink, struct dc_crtc_timing *crtc_timing); enum dc_status dc_validate_plane(struct dc *dc, const struct dc_plane_state *plane_state); void get_clock_requirements_for_state(struct dc_state *state, struct AsicStateEx *info); enum dc_status dc_validate_with_context(struct dc *dc, const struct dc_validation_set set[], int set_count, struct dc_state *context, bool fast_validate); bool dc_set_generic_gpio_for_stereo(bool enable, struct gpio_service *gpio_service); /* * fast_validate: we return after determining if we can support the new state, * but before we populate the programming info */ enum dc_status dc_validate_global_state( struct dc *dc, struct dc_state *new_ctx, bool fast_validate); bool dc_acquire_release_mpc_3dlut( struct dc *dc, bool acquire, struct dc_stream_state *stream, struct dc_3dlut **lut, struct dc_transfer_func **shaper); bool dc_resource_is_dsc_encoding_supported(const struct dc *dc); void get_audio_check(struct audio_info *aud_modes, struct audio_check *aud_chk); bool fast_nonaddr_updates_exist(struct dc_fast_update *fast_update, int surface_count); void populate_fast_updates(struct dc_fast_update *fast_update, struct dc_surface_update *srf_updates, int surface_count, struct dc_stream_update *stream_update); /* * Set up streams and links associated to drive sinks * The streams parameter is an absolute set of all active streams. * * After this call: * Phy, Encoder, Timing Generator are programmed and enabled. * New streams are enabled with blank stream; no memory read. */ enum dc_status dc_commit_streams(struct dc *dc, struct dc_commit_streams_params *params); struct dc_plane_state *dc_get_surface_for_mpcc(struct dc *dc, struct dc_stream_state *stream, int mpcc_inst); uint32_t dc_get_opp_for_plane(struct dc *dc, struct dc_plane_state *plane); void dc_set_disable_128b_132b_stream_overhead(bool disable); /* The function returns minimum bandwidth required to drive a given timing * return - minimum required timing bandwidth in kbps. */ uint32_t dc_bandwidth_in_kbps_from_timing( const struct dc_crtc_timing *timing, const enum dc_link_encoding_format link_encoding); /* Link Interfaces */ /* * A link contains one or more sinks and their connected status. * The currently active signal type (HDMI, DP-SST, DP-MST) is also reported. */ struct dc_link { struct dc_sink *remote_sinks[MAX_SINKS_PER_LINK]; unsigned int sink_count; struct dc_sink *local_sink; unsigned int link_index; enum dc_connection_type type; enum signal_type connector_signal; enum dc_irq_source irq_source_hpd; enum dc_irq_source irq_source_hpd_rx;/* aka DP Short Pulse */ bool is_hpd_filter_disabled; bool dp_ss_off; /** * @link_state_valid: * * If there is no link and local sink, this variable should be set to * false. Otherwise, it should be set to true; usually, the function * core_link_enable_stream sets this field to true. */ bool link_state_valid; bool aux_access_disabled; bool sync_lt_in_progress; bool skip_stream_reenable; bool is_internal_display; /** @todo Rename. Flag an endpoint as having a programmable mapping to a DIG encoder. */ bool is_dig_mapping_flexible; bool hpd_status; /* HPD status of link without physical HPD pin. */ bool is_hpd_pending; /* Indicates a new received hpd */ /* USB4 DPIA links skip verifying link cap, instead performing the fallback method * for every link training. This is incompatible with DP LL compliance automation, * which expects the same link settings to be used every retry on a link loss. * This flag is used to skip the fallback when link loss occurs during automation. */ bool skip_fallback_on_link_loss; bool edp_sink_present; struct dp_trace dp_trace; /* caps is the same as reported_link_cap. link_traing use * reported_link_cap. Will clean up. TODO */ struct dc_link_settings reported_link_cap; struct dc_link_settings verified_link_cap; struct dc_link_settings cur_link_settings; struct dc_lane_settings cur_lane_setting[LANE_COUNT_DP_MAX]; struct dc_link_settings preferred_link_setting; /* preferred_training_settings are override values that * come from DM. DM is responsible for the memory * management of the override pointers. */ struct dc_link_training_overrides preferred_training_settings; struct dp_audio_test_data audio_test_data; uint8_t ddc_hw_inst; uint8_t hpd_src; uint8_t link_enc_hw_inst; /* DIG link encoder ID. Used as index in link encoder resource pool. * For links with fixed mapping to DIG, this is not changed after dc_link * object creation. */ enum engine_id eng_id; enum engine_id dpia_preferred_eng_id; bool test_pattern_enabled; /* Pending/Current test pattern are only used to perform and track * FIXED_VS retimer test pattern/lane adjustment override state. * Pending allows link HWSS to differentiate PHY vs non-PHY pattern, * to perform specific lane adjust overrides before setting certain * PHY test patterns. In cases when lane adjust and set test pattern * calls are not performed atomically (i.e. performing link training), * pending_test_pattern will be invalid or contain a non-PHY test pattern * and current_test_pattern will contain required context for any future * set pattern/set lane adjust to transition between override state(s). * */ enum dp_test_pattern current_test_pattern; enum dp_test_pattern pending_test_pattern; union compliance_test_state compliance_test_state; void *priv; struct ddc_service *ddc; enum dp_panel_mode panel_mode; bool aux_mode; /* Private to DC core */ const struct dc *dc; struct dc_context *ctx; struct panel_cntl *panel_cntl; struct link_encoder *link_enc; struct graphics_object_id link_id; /* Endpoint type distinguishes display endpoints which do not have entries * in the BIOS connector table from those that do. Helps when tracking link * encoder to display endpoint assignments. */ enum display_endpoint_type ep_type; union ddi_channel_mapping ddi_channel_mapping; struct connector_device_tag_info device_tag; struct dpcd_caps dpcd_caps; uint32_t dongle_max_pix_clk; unsigned short chip_caps; unsigned int dpcd_sink_count; struct hdcp_caps hdcp_caps; enum edp_revision edp_revision; union dpcd_sink_ext_caps dpcd_sink_ext_caps; struct psr_settings psr_settings; struct replay_settings replay_settings; /* Drive settings read from integrated info table */ struct dc_lane_settings bios_forced_drive_settings; /* Vendor specific LTTPR workaround variables */ uint8_t vendor_specific_lttpr_link_rate_wa; bool apply_vendor_specific_lttpr_link_rate_wa; /* MST record stream using this link */ struct link_flags { bool dp_keep_receiver_powered; bool dp_skip_DID2; bool dp_skip_reset_segment; bool dp_skip_fs_144hz; bool dp_mot_reset_segment; /* Some USB4 docks do not handle turning off MST DSC once it has been enabled. */ bool dpia_mst_dsc_always_on; /* Forced DPIA into TBT3 compatibility mode. */ bool dpia_forced_tbt3_mode; bool dongle_mode_timing_override; bool blank_stream_on_ocs_change; bool read_dpcd204h_on_irq_hpd; } wa_flags; struct link_mst_stream_allocation_table mst_stream_alloc_table; struct dc_link_status link_status; struct dprx_states dprx_states; struct gpio *hpd_gpio; enum dc_link_fec_state fec_state; bool link_powered_externally; // Used to bypass hardware sequencing delays when panel is powered down forcibly struct dc_panel_config panel_config; struct phy_state phy_state; // BW ALLOCATON USB4 ONLY struct dc_dpia_bw_alloc dpia_bw_alloc_config; bool skip_implict_edp_power_control; enum backlight_control_type backlight_control_type; }; /* Return an enumerated dc_link. * dc_link order is constant and determined at * boot time. They cannot be created or destroyed. * Use dc_get_caps() to get number of links. */ struct dc_link *dc_get_link_at_index(struct dc *dc, uint32_t link_index); /* Return instance id of the edp link. Inst 0 is primary edp link. */ bool dc_get_edp_link_panel_inst(const struct dc *dc, const struct dc_link *link, unsigned int *inst_out); /* Return an array of link pointers to edp links. */ void dc_get_edp_links(const struct dc *dc, struct dc_link **edp_links, int *edp_num); void dc_set_edp_power(const struct dc *dc, struct dc_link *edp_link, bool powerOn); /* The function initiates detection handshake over the given link. It first * determines if there are display connections over the link. If so it initiates * detection protocols supported by the connected receiver device. The function * contains protocol specific handshake sequences which are sometimes mandatory * to establish a proper connection between TX and RX. So it is always * recommended to call this function as the first link operation upon HPD event * or power up event. Upon completion, the function will update link structure * in place based on latest RX capabilities. The function may also cause dpms * to be reset to off for all currently enabled streams to the link. It is DM's * responsibility to serialize detection and DPMS updates. * * @reason - Indicate which event triggers this detection. dc may customize * detection flow depending on the triggering events. * return false - if detection is not fully completed. This could happen when * there is an unrecoverable error during detection or detection is partially * completed (detection has been delegated to dm mst manager ie. * link->connection_type == dc_connection_mst_branch when returning false). * return true - detection is completed, link has been fully updated with latest * detection result. */ bool dc_link_detect(struct dc_link *link, enum dc_detect_reason reason); struct dc_sink_init_data; /* When link connection type is dc_connection_mst_branch, remote sink can be * added to the link. The interface creates a remote sink and associates it with * current link. The sink will be retained by link until remove remote sink is * called. * * @dc_link - link the remote sink will be added to. * @edid - byte array of EDID raw data. * @len - size of the edid in byte * @init_data - */ struct dc_sink *dc_link_add_remote_sink( struct dc_link *dc_link, const uint8_t *edid, int len, struct dc_sink_init_data *init_data); /* Remove remote sink from a link with dc_connection_mst_branch connection type. * @link - link the sink should be removed from * @sink - sink to be removed. */ void dc_link_remove_remote_sink( struct dc_link *link, struct dc_sink *sink); /* Enable HPD interrupt handler for a given link */ void dc_link_enable_hpd(const struct dc_link *link); /* Disable HPD interrupt handler for a given link */ void dc_link_disable_hpd(const struct dc_link *link); /* determine if there is a sink connected to the link * * @type - dc_connection_single if connected, dc_connection_none otherwise. * return - false if an unexpected error occurs, true otherwise. * * NOTE: This function doesn't detect downstream sink connections i.e * dc_connection_mst_branch, dc_connection_sst_branch. In this case, it will * return dc_connection_single if the branch device is connected despite of * downstream sink's connection status. */ bool dc_link_detect_connection_type(struct dc_link *link, enum dc_connection_type *type); /* query current hpd pin value * return - true HPD is asserted (HPD high), false otherwise (HPD low) * */ bool dc_link_get_hpd_state(struct dc_link *link); /* Getter for cached link status from given link */ const struct dc_link_status *dc_link_get_status(const struct dc_link *link); /* enable/disable hardware HPD filter. * * @link - The link the HPD pin is associated with. * @enable = true - enable hardware HPD filter. HPD event will only queued to irq * handler once after no HPD change has been detected within dc default HPD * filtering interval since last HPD event. i.e if display keeps toggling hpd * pulses within default HPD interval, no HPD event will be received until HPD * toggles have stopped. Then HPD event will be queued to irq handler once after * dc default HPD filtering interval since last HPD event. * * @enable = false - disable hardware HPD filter. HPD event will be queued * immediately to irq handler after no HPD change has been detected within * IRQ_HPD (aka HPD short pulse) interval (i.e 2ms). */ void dc_link_enable_hpd_filter(struct dc_link *link, bool enable); /* submit i2c read/write payloads through ddc channel * @link_index - index to a link with ddc in i2c mode * @cmd - i2c command structure * return - true if success, false otherwise. */ bool dc_submit_i2c( struct dc *dc, uint32_t link_index, struct i2c_command *cmd); /* submit i2c read/write payloads through oem channel * @link_index - index to a link with ddc in i2c mode * @cmd - i2c command structure * return - true if success, false otherwise. */ bool dc_submit_i2c_oem( struct dc *dc, struct i2c_command *cmd); enum aux_return_code_type; /* Attempt to transfer the given aux payload. This function does not perform * retries or handle error states. The reply is returned in the payload->reply * and the result through operation_result. Returns the number of bytes * transferred,or -1 on a failure. */ int dc_link_aux_transfer_raw(struct ddc_service *ddc, struct aux_payload *payload, enum aux_return_code_type *operation_result); bool dc_is_oem_i2c_device_present( struct dc *dc, size_t slave_address ); /* return true if the connected receiver supports the hdcp version */ bool dc_link_is_hdcp14(struct dc_link *link, enum signal_type signal); bool dc_link_is_hdcp22(struct dc_link *link, enum signal_type signal); /* Notify DC about DP RX Interrupt (aka DP IRQ_HPD). * * TODO - When defer_handling is true the function will have a different purpose. * It no longer does complete hpd rx irq handling. We should create a separate * interface specifically for this case. * * Return: * true - Downstream port status changed. DM should call DC to do the * detection. * false - no change in Downstream port status. No further action required * from DM. */ bool dc_link_handle_hpd_rx_irq(struct dc_link *dc_link, union hpd_irq_data *hpd_irq_dpcd_data, bool *out_link_loss, bool defer_handling, bool *has_left_work); /* handle DP specs define test automation sequence*/ void dc_link_dp_handle_automated_test(struct dc_link *link); /* handle DP Link loss sequence and try to recover RX link loss with best * effort */ void dc_link_dp_handle_link_loss(struct dc_link *link); /* Determine if hpd rx irq should be handled or ignored * return true - hpd rx irq should be handled. * return false - it is safe to ignore hpd rx irq event */ bool dc_link_dp_allow_hpd_rx_irq(const struct dc_link *link); /* Determine if link loss is indicated with a given hpd_irq_dpcd_data. * @link - link the hpd irq data associated with * @hpd_irq_dpcd_data - input hpd irq data * return - true if hpd irq data indicates a link lost */ bool dc_link_check_link_loss_status(struct dc_link *link, union hpd_irq_data *hpd_irq_dpcd_data); /* Read hpd rx irq data from a given link * @link - link where the hpd irq data should be read from * @irq_data - output hpd irq data * return - DC_OK if hpd irq data is read successfully, otherwise hpd irq data * read has failed. */ enum dc_status dc_link_dp_read_hpd_rx_irq_data( struct dc_link *link, union hpd_irq_data *irq_data); /* The function clears recorded DP RX states in the link. DM should call this * function when it is resuming from S3 power state to previously connected links. * * TODO - in the future we should consider to expand link resume interface to * support clearing previous rx states. So we don't have to rely on dm to call * this interface explicitly. */ void dc_link_clear_dprx_states(struct dc_link *link); /* Destruct the mst topology of the link and reset the allocated payload table * * NOTE: this should only be called if DM chooses not to call dc_link_detect but * still wants to reset MST topology on an unplug event */ bool dc_link_reset_cur_dp_mst_topology(struct dc_link *link); /* The function calculates effective DP link bandwidth when a given link is * using the given link settings. * * return - total effective link bandwidth in kbps. */ uint32_t dc_link_bandwidth_kbps( const struct dc_link *link, const struct dc_link_settings *link_setting); /* The function takes a snapshot of current link resource allocation state * @dc: pointer to dc of the dm calling this * @map: a dc link resource snapshot defined internally to dc. * * DM needs to capture a snapshot of current link resource allocation mapping * and store it in its persistent storage. * * Some of the link resource is using first come first serve policy. * The allocation mapping depends on original hotplug order. This information * is lost after driver is loaded next time. The snapshot is used in order to * restore link resource to its previous state so user will get consistent * link capability allocation across reboot. * */ void dc_get_cur_link_res_map(const struct dc *dc, uint32_t *map); /* This function restores link resource allocation state from a snapshot * @dc: pointer to dc of the dm calling this * @map: a dc link resource snapshot defined internally to dc. * * DM needs to call this function after initial link detection on boot and * before first commit streams to restore link resource allocation state * from previous boot session. * * Some of the link resource is using first come first serve policy. * The allocation mapping depends on original hotplug order. This information * is lost after driver is loaded next time. The snapshot is used in order to * restore link resource to its previous state so user will get consistent * link capability allocation across reboot. * */ void dc_restore_link_res_map(const struct dc *dc, uint32_t *map); /* TODO: this is not meant to be exposed to DM. Should switch to stream update * interface i.e stream_update->dsc_config */ bool dc_link_update_dsc_config(struct pipe_ctx *pipe_ctx); /* translate a raw link rate data to bandwidth in kbps */ uint32_t dc_link_bw_kbps_from_raw_frl_link_rate_data(const struct dc *dc, uint8_t bw); /* determine the optimal bandwidth given link and required bw. * @link - current detected link * @req_bw - requested bandwidth in kbps * @link_settings - returned most optimal link settings that can fit the * requested bandwidth * return - false if link can't support requested bandwidth, true if link * settings is found. */ bool dc_link_decide_edp_link_settings(struct dc_link *link, struct dc_link_settings *link_settings, uint32_t req_bw); /* return the max dp link settings can be driven by the link without considering * connected RX device and its capability */ bool dc_link_dp_get_max_link_enc_cap(const struct dc_link *link, struct dc_link_settings *max_link_enc_cap); /* determine when the link is driving MST mode, what DP link channel coding * format will be used. The decision will remain unchanged until next HPD event. * * @link - a link with DP RX connection * return - if stream is committed to this link with MST signal type, type of * channel coding format dc will choose. */ enum dp_link_encoding dc_link_dp_mst_decide_link_encoding_format( const struct dc_link *link); /* get max dp link settings the link can enable with all things considered. (i.e * TX/RX/Cable capabilities and dp override policies. * * @link - a link with DP RX connection * return - max dp link settings the link can enable. * */ const struct dc_link_settings *dc_link_get_link_cap(const struct dc_link *link); /* Get the highest encoding format that the link supports; highest meaning the * encoding format which supports the maximum bandwidth. * * @link - a link with DP RX connection * return - highest encoding format link supports. */ enum dc_link_encoding_format dc_link_get_highest_encoding_format(const struct dc_link *link); /* Check if a RX (ex. DP sink, MST hub, passive or active dongle) is connected * to a link with dp connector signal type. * @link - a link with dp connector signal type * return - true if connected, false otherwise */ bool dc_link_is_dp_sink_present(struct dc_link *link); /* Force DP lane settings update to main-link video signal and notify the change * to DP RX via DPCD. This is a debug interface used for video signal integrity * tuning purpose. The interface assumes link has already been enabled with DP * signal. * * @lt_settings - a container structure with desired hw_lane_settings */ void dc_link_set_drive_settings(struct dc *dc, struct link_training_settings *lt_settings, struct dc_link *link); /* Enable a test pattern in Link or PHY layer in an active link for compliance * test or debugging purpose. The test pattern will remain until next un-plug. * * @link - active link with DP signal output enabled. * @test_pattern - desired test pattern to output. * NOTE: set to DP_TEST_PATTERN_VIDEO_MODE to disable previous test pattern. * @test_pattern_color_space - for video test pattern choose a desired color * space. * @p_link_settings - For PHY pattern choose a desired link settings * @p_custom_pattern - some test pattern will require a custom input to * customize some pattern details. Otherwise keep it to NULL. * @cust_pattern_size - size of the custom pattern input. * */ bool dc_link_dp_set_test_pattern( struct dc_link *link, enum dp_test_pattern test_pattern, enum dp_test_pattern_color_space test_pattern_color_space, const struct link_training_settings *p_link_settings, const unsigned char *p_custom_pattern, unsigned int cust_pattern_size); /* Force DP link settings to always use a specific value until reboot to a * specific link. If link has already been enabled, the interface will also * switch to desired link settings immediately. This is a debug interface to * generic dp issue trouble shooting. */ void dc_link_set_preferred_link_settings(struct dc *dc, struct dc_link_settings *link_setting, struct dc_link *link); /* Force DP link to customize a specific link training behavior by overriding to * standard DP specs defined protocol. This is a debug interface to trouble shoot * display specific link training issues or apply some display specific * workaround in link training. * * @link_settings - if not NULL, force preferred link settings to the link. * @lt_override - a set of override pointers. If any pointer is none NULL, dc * will apply this particular override in future link training. If NULL is * passed in, dc resets previous overrides. * NOTE: DM must keep the memory from override pointers until DM resets preferred * training settings. */ void dc_link_set_preferred_training_settings(struct dc *dc, struct dc_link_settings *link_setting, struct dc_link_training_overrides *lt_overrides, struct dc_link *link, bool skip_immediate_retrain); /* return - true if FEC is supported with connected DP RX, false otherwise */ bool dc_link_is_fec_supported(const struct dc_link *link); /* query FEC enablement policy to determine if FEC will be enabled by dc during * link enablement. * return - true if FEC should be enabled, false otherwise. */ bool dc_link_should_enable_fec(const struct dc_link *link); /* determine lttpr mode the current link should be enabled with a specific link * settings. */ enum lttpr_mode dc_link_decide_lttpr_mode(struct dc_link *link, struct dc_link_settings *link_setting); /* Force DP RX to update its power state. * NOTE: this interface doesn't update dp main-link. Calling this function will * cause DP TX main-link and DP RX power states out of sync. DM has to restore * RX power state back upon finish DM specific execution requiring DP RX in a * specific power state. * @on - true to set DP RX in D0 power state, false to set DP RX in D3 power * state. */ void dc_link_dp_receiver_power_ctrl(struct dc_link *link, bool on); /* Force link to read base dp receiver caps from dpcd 000h - 00Fh and overwrite * current value read from extended receiver cap from 02200h - 0220Fh. * Some DP RX has problems of providing accurate DP receiver caps from extended * field, this interface is a workaround to revert link back to use base caps. */ void dc_link_overwrite_extended_receiver_cap( struct dc_link *link); void dc_link_edp_panel_backlight_power_on(struct dc_link *link, bool wait_for_hpd); /* Set backlight level of an embedded panel (eDP, LVDS). * backlight_pwm_u16_16 is unsigned 32 bit with 16 bit integer * and 16 bit fractional, where 1.0 is max backlight value. */ bool dc_link_set_backlight_level(const struct dc_link *dc_link, struct set_backlight_level_params *backlight_level_params); /* Set/get nits-based backlight level of an embedded panel (eDP, LVDS). */ bool dc_link_set_backlight_level_nits(struct dc_link *link, bool isHDR, uint32_t backlight_millinits, uint32_t transition_time_in_ms); bool dc_link_get_backlight_level_nits(struct dc_link *link, uint32_t *backlight_millinits, uint32_t *backlight_millinits_peak); int dc_link_get_backlight_level(const struct dc_link *dc_link); int dc_link_get_target_backlight_pwm(const struct dc_link *link); bool dc_link_set_psr_allow_active(struct dc_link *dc_link, const bool *enable, bool wait, bool force_static, const unsigned int *power_opts); bool dc_link_get_psr_state(const struct dc_link *dc_link, enum dc_psr_state *state); bool dc_link_setup_psr(struct dc_link *dc_link, const struct dc_stream_state *stream, struct psr_config *psr_config, struct psr_context *psr_context); /* * Communicate with DMUB to allow or disallow Panel Replay on the specified link: * * @link: pointer to the dc_link struct instance * @enable: enable(active) or disable(inactive) replay * @wait: state transition need to wait the active set completed. * @force_static: force disable(inactive) the replay * @power_opts: set power optimazation parameters to DMUB. * * return: allow Replay active will return true, else will return false. */ bool dc_link_set_replay_allow_active(struct dc_link *dc_link, const bool *enable, bool wait, bool force_static, const unsigned int *power_opts); bool dc_link_get_replay_state(const struct dc_link *dc_link, uint64_t *state); /* On eDP links this function call will stall until T12 has elapsed. * If the panel is not in power off state, this function will return * immediately. */ bool dc_link_wait_for_t12(struct dc_link *link); /* Determine if dp trace has been initialized to reflect upto date result * * return - true if trace is initialized and has valid data. False dp trace * doesn't have valid result. */ bool dc_dp_trace_is_initialized(struct dc_link *link); /* Query a dp trace flag to indicate if the current dp trace data has been * logged before */ bool dc_dp_trace_is_logged(struct dc_link *link, bool in_detection); /* Set dp trace flag to indicate whether DM has already logged the current dp * trace data. DM can set is_logged to true upon logging and check * dc_dp_trace_is_logged before logging to avoid logging the same result twice. */ void dc_dp_trace_set_is_logged_flag(struct dc_link *link, bool in_detection, bool is_logged); /* Obtain driver time stamp for last dp link training end. The time stamp is * formatted based on dm_get_timestamp DM function. * @in_detection - true to get link training end time stamp of last link * training in detection sequence. false to get link training end time stamp * of last link training in commit (dpms) sequence */ unsigned long long dc_dp_trace_get_lt_end_timestamp(struct dc_link *link, bool in_detection); /* Get how many link training attempts dc has done with latest sequence. * @in_detection - true to get link training count of last link * training in detection sequence. false to get link training count of last link * training in commit (dpms) sequence */ const struct dp_trace_lt_counts *dc_dp_trace_get_lt_counts(struct dc_link *link, bool in_detection); /* Get how many link loss has happened since last link training attempts */ unsigned int dc_dp_trace_get_link_loss_count(struct dc_link *link); /* * USB4 DPIA BW ALLOCATION PUBLIC FUNCTIONS */ /* * Send a request from DP-Tx requesting to allocate BW remotely after * allocating it locally. This will get processed by CM and a CB function * will be called. * * @link: pointer to the dc_link struct instance * @req_bw: The requested bw in Kbyte to allocated * * return: none */ void dc_link_set_usb4_req_bw_req(struct dc_link *link, int req_bw); /* * Handle function for when the status of the Request above is complete. * We will find out the result of allocating on CM and update structs. * * @link: pointer to the dc_link struct instance * @bw: Allocated or Estimated BW depending on the result * @result: Response type * * return: none */ void dc_link_handle_usb4_bw_alloc_response(struct dc_link *link, uint8_t bw, uint8_t result); /* * Handle the USB4 BW Allocation related functionality here: * Plug => Try to allocate max bw from timing parameters supported by the sink * Unplug => de-allocate bw * * @link: pointer to the dc_link struct instance * @peak_bw: Peak bw used by the link/sink * * return: allocated bw else return 0 */ int dc_link_dp_dpia_handle_usb4_bandwidth_allocation_for_link( struct dc_link *link, int peak_bw); /* * Validate the BW of all the valid DPIA links to make sure it doesn't exceed * available BW for each host router * * @dc: pointer to dc struct * @stream: pointer to all possible streams * @count: number of valid DPIA streams * * return: TRUE if bw used by DPIAs doesn't exceed available BW else return FALSE */ bool dc_link_dp_dpia_validate(struct dc *dc, const struct dc_stream_state *streams, const unsigned int count); /* Sink Interfaces - A sink corresponds to a display output device */ struct dc_container_id { // 128bit GUID in binary form unsigned char guid[16]; // 8 byte port ID -> ELD.PortID unsigned int portId[2]; // 128bit GUID in binary formufacturer name -> ELD.ManufacturerName unsigned short manufacturerName; // 2 byte product code -> ELD.ProductCode unsigned short productCode; }; struct dc_sink_dsc_caps { // 'true' if these are virtual DPCD's DSC caps (immediately upstream of sink in MST topology), // 'false' if they are sink's DSC caps bool is_virtual_dpcd_dsc; // 'true' if MST topology supports DSC passthrough for sink // 'false' if MST topology does not support DSC passthrough bool is_dsc_passthrough_supported; struct dsc_dec_dpcd_caps dsc_dec_caps; }; struct dc_sink_fec_caps { bool is_rx_fec_supported; bool is_topology_fec_supported; }; struct scdc_caps { union hdmi_scdc_manufacturer_OUI_data manufacturer_OUI; union hdmi_scdc_device_id_data device_id; }; /* * The sink structure contains EDID and other display device properties */ struct dc_sink { enum signal_type sink_signal; struct dc_edid dc_edid; /* raw edid */ struct dc_edid_caps edid_caps; /* parse display caps */ struct dc_container_id *dc_container_id; uint32_t dongle_max_pix_clk; void *priv; struct stereo_3d_features features_3d[TIMING_3D_FORMAT_MAX]; bool converter_disable_audio; struct scdc_caps scdc_caps; struct dc_sink_dsc_caps dsc_caps; struct dc_sink_fec_caps fec_caps; bool is_vsc_sdp_colorimetry_supported; /* private to DC core */ struct dc_link *link; struct dc_context *ctx; uint32_t sink_id; /* private to dc_sink.c */ // refcount must be the last member in dc_sink, since we want the // sink structure to be logically cloneable up to (but not including) // refcount struct kref refcount; }; void dc_sink_retain(struct dc_sink *sink); void dc_sink_release(struct dc_sink *sink); struct dc_sink_init_data { enum signal_type sink_signal; struct dc_link *link; uint32_t dongle_max_pix_clk; bool converter_disable_audio; }; struct dc_sink *dc_sink_create(const struct dc_sink_init_data *init_params); /* Newer interfaces */ struct dc_cursor { struct dc_plane_address address; struct dc_cursor_attributes attributes; }; /* Interrupt interfaces */ enum dc_irq_source dc_interrupt_to_irq_source( struct dc *dc, uint32_t src_id, uint32_t ext_id); bool dc_interrupt_set(struct dc *dc, enum dc_irq_source src, bool enable); void dc_interrupt_ack(struct dc *dc, enum dc_irq_source src); enum dc_irq_source dc_get_hpd_irq_source_at_index( struct dc *dc, uint32_t link_index); void dc_notify_vsync_int_state(struct dc *dc, struct dc_stream_state *stream, bool enable); /* Power Interfaces */ void dc_set_power_state( struct dc *dc, enum dc_acpi_cm_power_state power_state); void dc_resume(struct dc *dc); void dc_power_down_on_boot(struct dc *dc); /* * HDCP Interfaces */ enum hdcp_message_status dc_process_hdcp_msg( enum signal_type signal, struct dc_link *link, struct hdcp_protection_message *message_info); bool dc_is_dmcu_initialized(struct dc *dc); enum dc_status dc_set_clock(struct dc *dc, enum dc_clock_type clock_type, uint32_t clk_khz, uint32_t stepping); void dc_get_clock(struct dc *dc, enum dc_clock_type clock_type, struct dc_clock_config *clock_cfg); bool dc_is_plane_eligible_for_idle_optimizations(struct dc *dc, unsigned int pitch, unsigned int height, enum surface_pixel_format format, struct dc_cursor_attributes *cursor_attr); #define dc_allow_idle_optimizations(dc, allow) dc_allow_idle_optimizations_internal(dc, allow, __func__) #define dc_exit_ips_for_hw_access(dc) dc_exit_ips_for_hw_access_internal(dc, __func__) void dc_allow_idle_optimizations_internal(struct dc *dc, bool allow, const char *caller_name); void dc_exit_ips_for_hw_access_internal(struct dc *dc, const char *caller_name); bool dc_dmub_is_ips_idle_state(struct dc *dc); /* set min and max memory clock to lowest and highest DPM level, respectively */ void dc_unlock_memory_clock_frequency(struct dc *dc); /* set min memory clock to the min required for current mode, max to maxDPM */ void dc_lock_memory_clock_frequency(struct dc *dc); /* set soft max for memclk, to be used for AC/DC switching clock limitations */ void dc_enable_dcmode_clk_limit(struct dc *dc, bool enable); /* cleanup on driver unload */ void dc_hardware_release(struct dc *dc); /* disables fw based mclk switch */ void dc_mclk_switch_using_fw_based_vblank_stretch_shut_down(struct dc *dc); bool dc_set_psr_allow_active(struct dc *dc, bool enable); bool dc_set_replay_allow_active(struct dc *dc, bool active); bool dc_set_ips_disable(struct dc *dc, unsigned int disable_ips); void dc_z10_restore(const struct dc *dc); void dc_z10_save_init(struct dc *dc); bool dc_is_dmub_outbox_supported(struct dc *dc); bool dc_enable_dmub_notifications(struct dc *dc); bool dc_abm_save_restore( struct dc *dc, struct dc_stream_state *stream, struct abm_save_restore *pData); void dc_enable_dmub_outbox(struct dc *dc); bool dc_process_dmub_aux_transfer_async(struct dc *dc, uint32_t link_index, struct aux_payload *payload); /* Get dc link index from dpia port index */ uint8_t get_link_index_from_dpia_port_index(const struct dc *dc, uint8_t dpia_port_index); bool dc_process_dmub_set_config_async(struct dc *dc, uint32_t link_index, struct set_config_cmd_payload *payload, struct dmub_notification *notify); enum dc_status dc_process_dmub_set_mst_slots(const struct dc *dc, uint32_t link_index, uint8_t mst_alloc_slots, uint8_t *mst_slots_in_use); void dc_process_dmub_dpia_set_tps_notification(const struct dc *dc, uint32_t link_index, uint8_t tps); void dc_process_dmub_dpia_hpd_int_enable(const struct dc *dc, uint32_t hpd_int_enable); void dc_print_dmub_diagnostic_data(const struct dc *dc); void dc_query_current_properties(struct dc *dc, struct dc_current_properties *properties); struct dc_power_profile { int power_level; /* Lower is better */ }; struct dc_power_profile dc_get_power_profile_for_dc_state(const struct dc_state *context); unsigned int dc_get_det_buffer_size_from_state(const struct dc_state *context); /* DSC Interfaces */ #include "dc_dsc.h" /* Disable acc mode Interfaces */ void dc_disable_accelerated_mode(struct dc *dc); bool dc_is_timing_changed(struct dc_stream_state *cur_stream, struct dc_stream_state *new_stream); #endif /* DC_INTERFACE_H_ */