// SPDX-License-Identifier: GPL-2.0-or-later /* * drm gem DMA helper functions * * Copyright (C) 2012 Sascha Hauer, Pengutronix * * Based on Samsung Exynos code * * Copyright (c) 2011 Samsung Electronics Co., Ltd. */ #include #include #include #include #include #include #include #include #include #include #include #include /** * DOC: dma helpers * * The DRM GEM/DMA helpers are a means to provide buffer objects that are * presented to the device as a contiguous chunk of memory. This is useful * for devices that do not support scatter-gather DMA (either directly or * by using an intimately attached IOMMU). * * For devices that access the memory bus through an (external) IOMMU then * the buffer objects are allocated using a traditional page-based * allocator and may be scattered through physical memory. However they * are contiguous in the IOVA space so appear contiguous to devices using * them. * * For other devices then the helpers rely on CMA to provide buffer * objects that are physically contiguous in memory. * * For GEM callback helpers in struct &drm_gem_object functions, see likewise * named functions with an _object_ infix (e.g., drm_gem_dma_object_vmap() wraps * drm_gem_dma_vmap()). These helpers perform the necessary type conversion. */ static const struct drm_gem_object_funcs drm_gem_dma_default_funcs = { .free = drm_gem_dma_object_free, .print_info = drm_gem_dma_object_print_info, .get_sg_table = drm_gem_dma_object_get_sg_table, .vmap = drm_gem_dma_object_vmap, .mmap = drm_gem_dma_object_mmap, .vm_ops = &drm_gem_dma_vm_ops, }; /** * __drm_gem_dma_create - Create a GEM DMA object without allocating memory * @drm: DRM device * @size: size of the object to allocate * @private: true if used for internal purposes * * This function creates and initializes a GEM DMA object of the given size, * but doesn't allocate any memory to back the object. * * Returns: * A struct drm_gem_dma_object * on success or an ERR_PTR()-encoded negative * error code on failure. */ static struct drm_gem_dma_object * __drm_gem_dma_create(struct drm_device *drm, size_t size, bool private) { struct drm_gem_dma_object *dma_obj; struct drm_gem_object *gem_obj; int ret = 0; if (drm->driver->gem_create_object) { gem_obj = drm->driver->gem_create_object(drm, size); if (IS_ERR(gem_obj)) return ERR_CAST(gem_obj); dma_obj = to_drm_gem_dma_obj(gem_obj); } else { dma_obj = kzalloc(sizeof(*dma_obj), GFP_KERNEL); if (!dma_obj) return ERR_PTR(-ENOMEM); gem_obj = &dma_obj->base; } if (!gem_obj->funcs) gem_obj->funcs = &drm_gem_dma_default_funcs; if (private) { drm_gem_private_object_init(drm, gem_obj, size); /* Always use writecombine for dma-buf mappings */ dma_obj->map_noncoherent = false; } else { ret = drm_gem_object_init(drm, gem_obj, size); } if (ret) goto error; ret = drm_gem_create_mmap_offset(gem_obj); if (ret) { drm_gem_object_release(gem_obj); goto error; } return dma_obj; error: kfree(dma_obj); return ERR_PTR(ret); } /** * drm_gem_dma_create - allocate an object with the given size * @drm: DRM device * @size: size of the object to allocate * * This function creates a DMA GEM object and allocates memory as backing store. * The allocated memory will occupy a contiguous chunk of bus address space. * * For devices that are directly connected to the memory bus then the allocated * memory will be physically contiguous. For devices that access through an * IOMMU, then the allocated memory is not expected to be physically contiguous * because having contiguous IOVAs is sufficient to meet a devices DMA * requirements. * * Returns: * A struct drm_gem_dma_object * on success or an ERR_PTR()-encoded negative * error code on failure. */ struct drm_gem_dma_object *drm_gem_dma_create(struct drm_device *drm, size_t size) { struct drm_gem_dma_object *dma_obj; int ret; size = round_up(size, PAGE_SIZE); dma_obj = __drm_gem_dma_create(drm, size, false); if (IS_ERR(dma_obj)) return dma_obj; if (dma_obj->map_noncoherent) { dma_obj->vaddr = dma_alloc_noncoherent(drm->dev, size, &dma_obj->dma_addr, DMA_TO_DEVICE, GFP_KERNEL | __GFP_NOWARN); } else { dma_obj->vaddr = dma_alloc_wc(drm->dev, size, &dma_obj->dma_addr, GFP_KERNEL | __GFP_NOWARN); } if (!dma_obj->vaddr) { drm_dbg(drm, "failed to allocate buffer with size %zu\n", size); ret = -ENOMEM; goto error; } return dma_obj; error: drm_gem_object_put(&dma_obj->base); return ERR_PTR(ret); } EXPORT_SYMBOL_GPL(drm_gem_dma_create); /** * drm_gem_dma_create_with_handle - allocate an object with the given size and * return a GEM handle to it * @file_priv: DRM file-private structure to register the handle for * @drm: DRM device * @size: size of the object to allocate * @handle: return location for the GEM handle * * This function creates a DMA GEM object, allocating a chunk of memory as * backing store. The GEM object is then added to the list of object associated * with the given file and a handle to it is returned. * * The allocated memory will occupy a contiguous chunk of bus address space. * See drm_gem_dma_create() for more details. * * Returns: * A struct drm_gem_dma_object * on success or an ERR_PTR()-encoded negative * error code on failure. */ static struct drm_gem_dma_object * drm_gem_dma_create_with_handle(struct drm_file *file_priv, struct drm_device *drm, size_t size, uint32_t *handle) { struct drm_gem_dma_object *dma_obj; struct drm_gem_object *gem_obj; int ret; dma_obj = drm_gem_dma_create(drm, size); if (IS_ERR(dma_obj)) return dma_obj; gem_obj = &dma_obj->base; /* * allocate a id of idr table where the obj is registered * and handle has the id what user can see. */ ret = drm_gem_handle_create(file_priv, gem_obj, handle); /* drop reference from allocate - handle holds it now. */ drm_gem_object_put(gem_obj); if (ret) return ERR_PTR(ret); return dma_obj; } /** * drm_gem_dma_free - free resources associated with a DMA GEM object * @dma_obj: DMA GEM object to free * * This function frees the backing memory of the DMA GEM object, cleans up the * GEM object state and frees the memory used to store the object itself. * If the buffer is imported and the virtual address is set, it is released. */ void drm_gem_dma_free(struct drm_gem_dma_object *dma_obj) { struct drm_gem_object *gem_obj = &dma_obj->base; struct iosys_map map = IOSYS_MAP_INIT_VADDR(dma_obj->vaddr); if (gem_obj->import_attach) { if (dma_obj->vaddr) dma_buf_vunmap_unlocked(gem_obj->import_attach->dmabuf, &map); drm_prime_gem_destroy(gem_obj, dma_obj->sgt); } else if (dma_obj->vaddr) { if (dma_obj->map_noncoherent) dma_free_noncoherent(gem_obj->dev->dev, dma_obj->base.size, dma_obj->vaddr, dma_obj->dma_addr, DMA_TO_DEVICE); else dma_free_wc(gem_obj->dev->dev, dma_obj->base.size, dma_obj->vaddr, dma_obj->dma_addr); } drm_gem_object_release(gem_obj); kfree(dma_obj); } EXPORT_SYMBOL_GPL(drm_gem_dma_free); /** * drm_gem_dma_dumb_create_internal - create a dumb buffer object * @file_priv: DRM file-private structure to create the dumb buffer for * @drm: DRM device * @args: IOCTL data * * This aligns the pitch and size arguments to the minimum required. This is * an internal helper that can be wrapped by a driver to account for hardware * with more specific alignment requirements. It should not be used directly * as their &drm_driver.dumb_create callback. * * Returns: * 0 on success or a negative error code on failure. */ int drm_gem_dma_dumb_create_internal(struct drm_file *file_priv, struct drm_device *drm, struct drm_mode_create_dumb *args) { unsigned int min_pitch = DIV_ROUND_UP(args->width * args->bpp, 8); struct drm_gem_dma_object *dma_obj; if (args->pitch < min_pitch) args->pitch = min_pitch; if (args->size < args->pitch * args->height) args->size = args->pitch * args->height; dma_obj = drm_gem_dma_create_with_handle(file_priv, drm, args->size, &args->handle); return PTR_ERR_OR_ZERO(dma_obj); } EXPORT_SYMBOL_GPL(drm_gem_dma_dumb_create_internal); /** * drm_gem_dma_dumb_create - create a dumb buffer object * @file_priv: DRM file-private structure to create the dumb buffer for * @drm: DRM device * @args: IOCTL data * * This function computes the pitch of the dumb buffer and rounds it up to an * integer number of bytes per pixel. Drivers for hardware that doesn't have * any additional restrictions on the pitch can directly use this function as * their &drm_driver.dumb_create callback. * * For hardware with additional restrictions, drivers can adjust the fields * set up by userspace and pass the IOCTL data along to the * drm_gem_dma_dumb_create_internal() function. * * Returns: * 0 on success or a negative error code on failure. */ int drm_gem_dma_dumb_create(struct drm_file *file_priv, struct drm_device *drm, struct drm_mode_create_dumb *args) { struct drm_gem_dma_object *dma_obj; args->pitch = DIV_ROUND_UP(args->width * args->bpp, 8); args->size = args->pitch * args->height; dma_obj = drm_gem_dma_create_with_handle(file_priv, drm, args->size, &args->handle); return PTR_ERR_OR_ZERO(dma_obj); } EXPORT_SYMBOL_GPL(drm_gem_dma_dumb_create); const struct vm_operations_struct drm_gem_dma_vm_ops = { .open = drm_gem_vm_open, .close = drm_gem_vm_close, }; EXPORT_SYMBOL_GPL(drm_gem_dma_vm_ops); #ifndef CONFIG_MMU /** * drm_gem_dma_get_unmapped_area - propose address for mapping in noMMU cases * @filp: file object * @addr: memory address * @len: buffer size * @pgoff: page offset * @flags: memory flags * * This function is used in noMMU platforms to propose address mapping * for a given buffer. * It's intended to be used as a direct handler for the struct * &file_operations.get_unmapped_area operation. * * Returns: * mapping address on success or a negative error code on failure. */ unsigned long drm_gem_dma_get_unmapped_area(struct file *filp, unsigned long addr, unsigned long len, unsigned long pgoff, unsigned long flags) { struct drm_gem_dma_object *dma_obj; struct drm_gem_object *obj = NULL; struct drm_file *priv = filp->private_data; struct drm_device *dev = priv->minor->dev; struct drm_vma_offset_node *node; if (drm_dev_is_unplugged(dev)) return -ENODEV; drm_vma_offset_lock_lookup(dev->vma_offset_manager); node = drm_vma_offset_exact_lookup_locked(dev->vma_offset_manager, pgoff, len >> PAGE_SHIFT); if (likely(node)) { obj = container_of(node, struct drm_gem_object, vma_node); /* * When the object is being freed, after it hits 0-refcnt it * proceeds to tear down the object. In the process it will * attempt to remove the VMA offset and so acquire this * mgr->vm_lock. Therefore if we find an object with a 0-refcnt * that matches our range, we know it is in the process of being * destroyed and will be freed as soon as we release the lock - * so we have to check for the 0-refcnted object and treat it as * invalid. */ if (!kref_get_unless_zero(&obj->refcount)) obj = NULL; } drm_vma_offset_unlock_lookup(dev->vma_offset_manager); if (!obj) return -EINVAL; if (!drm_vma_node_is_allowed(node, priv)) { drm_gem_object_put(obj); return -EACCES; } dma_obj = to_drm_gem_dma_obj(obj); drm_gem_object_put(obj); return dma_obj->vaddr ? (unsigned long)dma_obj->vaddr : -EINVAL; } EXPORT_SYMBOL_GPL(drm_gem_dma_get_unmapped_area); #endif /** * drm_gem_dma_print_info() - Print &drm_gem_dma_object info for debugfs * @dma_obj: DMA GEM object * @p: DRM printer * @indent: Tab indentation level * * This function prints dma_addr and vaddr for use in e.g. debugfs output. */ void drm_gem_dma_print_info(const struct drm_gem_dma_object *dma_obj, struct drm_printer *p, unsigned int indent) { drm_printf_indent(p, indent, "dma_addr=%pad\n", &dma_obj->dma_addr); drm_printf_indent(p, indent, "vaddr=%p\n", dma_obj->vaddr); } EXPORT_SYMBOL(drm_gem_dma_print_info); /** * drm_gem_dma_get_sg_table - provide a scatter/gather table of pinned * pages for a DMA GEM object * @dma_obj: DMA GEM object * * This function exports a scatter/gather table by calling the standard * DMA mapping API. * * Returns: * A pointer to the scatter/gather table of pinned pages or NULL on failure. */ struct sg_table *drm_gem_dma_get_sg_table(struct drm_gem_dma_object *dma_obj) { struct drm_gem_object *obj = &dma_obj->base; struct sg_table *sgt; int ret; sgt = kzalloc(sizeof(*sgt), GFP_KERNEL); if (!sgt) return ERR_PTR(-ENOMEM); ret = dma_get_sgtable(obj->dev->dev, sgt, dma_obj->vaddr, dma_obj->dma_addr, obj->size); if (ret < 0) goto out; return sgt; out: kfree(sgt); return ERR_PTR(ret); } EXPORT_SYMBOL_GPL(drm_gem_dma_get_sg_table); /** * drm_gem_dma_prime_import_sg_table - produce a DMA GEM object from another * driver's scatter/gather table of pinned pages * @dev: device to import into * @attach: DMA-BUF attachment * @sgt: scatter/gather table of pinned pages * * This function imports a scatter/gather table exported via DMA-BUF by * another driver. Imported buffers must be physically contiguous in memory * (i.e. the scatter/gather table must contain a single entry). Drivers that * use the DMA helpers should set this as their * &drm_driver.gem_prime_import_sg_table callback. * * Returns: * A pointer to a newly created GEM object or an ERR_PTR-encoded negative * error code on failure. */ struct drm_gem_object * drm_gem_dma_prime_import_sg_table(struct drm_device *dev, struct dma_buf_attachment *attach, struct sg_table *sgt) { struct drm_gem_dma_object *dma_obj; /* check if the entries in the sg_table are contiguous */ if (drm_prime_get_contiguous_size(sgt) < attach->dmabuf->size) return ERR_PTR(-EINVAL); /* Create a DMA GEM buffer. */ dma_obj = __drm_gem_dma_create(dev, attach->dmabuf->size, true); if (IS_ERR(dma_obj)) return ERR_CAST(dma_obj); dma_obj->dma_addr = sg_dma_address(sgt->sgl); dma_obj->sgt = sgt; drm_dbg_prime(dev, "dma_addr = %pad, size = %zu\n", &dma_obj->dma_addr, attach->dmabuf->size); return &dma_obj->base; } EXPORT_SYMBOL_GPL(drm_gem_dma_prime_import_sg_table); /** * drm_gem_dma_vmap - map a DMA GEM object into the kernel's virtual * address space * @dma_obj: DMA GEM object * @map: Returns the kernel virtual address of the DMA GEM object's backing * store. * * This function maps a buffer into the kernel's virtual address space. * Since the DMA buffers are already mapped into the kernel virtual address * space this simply returns the cached virtual address. * * Returns: * 0 on success, or a negative error code otherwise. */ int drm_gem_dma_vmap(struct drm_gem_dma_object *dma_obj, struct iosys_map *map) { iosys_map_set_vaddr(map, dma_obj->vaddr); return 0; } EXPORT_SYMBOL_GPL(drm_gem_dma_vmap); /** * drm_gem_dma_mmap - memory-map an exported DMA GEM object * @dma_obj: DMA GEM object * @vma: VMA for the area to be mapped * * This function maps a buffer into a userspace process's address space. * In addition to the usual GEM VMA setup it immediately faults in the entire * object instead of using on-demand faulting. * * Returns: * 0 on success or a negative error code on failure. */ int drm_gem_dma_mmap(struct drm_gem_dma_object *dma_obj, struct vm_area_struct *vma) { struct drm_gem_object *obj = &dma_obj->base; int ret; /* * Clear the VM_PFNMAP flag that was set by drm_gem_mmap(), and set the * vm_pgoff (used as a fake buffer offset by DRM) to 0 as we want to map * the whole buffer. */ vma->vm_pgoff -= drm_vma_node_start(&obj->vma_node); vm_flags_mod(vma, VM_DONTEXPAND, VM_PFNMAP); if (dma_obj->map_noncoherent) { vma->vm_page_prot = vm_get_page_prot(vma->vm_flags); ret = dma_mmap_pages(dma_obj->base.dev->dev, vma, vma->vm_end - vma->vm_start, virt_to_page(dma_obj->vaddr)); } else { ret = dma_mmap_wc(dma_obj->base.dev->dev, vma, dma_obj->vaddr, dma_obj->dma_addr, vma->vm_end - vma->vm_start); } if (ret) drm_gem_vm_close(vma); return ret; } EXPORT_SYMBOL_GPL(drm_gem_dma_mmap); /** * drm_gem_dma_prime_import_sg_table_vmap - PRIME import another driver's * scatter/gather table and get the virtual address of the buffer * @dev: DRM device * @attach: DMA-BUF attachment * @sgt: Scatter/gather table of pinned pages * * This function imports a scatter/gather table using * drm_gem_dma_prime_import_sg_table() and uses dma_buf_vmap() to get the kernel * virtual address. This ensures that a DMA GEM object always has its virtual * address set. This address is released when the object is freed. * * This function can be used as the &drm_driver.gem_prime_import_sg_table * callback. The &DRM_GEM_DMA_DRIVER_OPS_VMAP macro provides a shortcut to set * the necessary DRM driver operations. * * Returns: * A pointer to a newly created GEM object or an ERR_PTR-encoded negative * error code on failure. */ struct drm_gem_object * drm_gem_dma_prime_import_sg_table_vmap(struct drm_device *dev, struct dma_buf_attachment *attach, struct sg_table *sgt) { struct drm_gem_dma_object *dma_obj; struct drm_gem_object *obj; struct iosys_map map; int ret; ret = dma_buf_vmap_unlocked(attach->dmabuf, &map); if (ret) { DRM_ERROR("Failed to vmap PRIME buffer\n"); return ERR_PTR(ret); } obj = drm_gem_dma_prime_import_sg_table(dev, attach, sgt); if (IS_ERR(obj)) { dma_buf_vunmap_unlocked(attach->dmabuf, &map); return obj; } dma_obj = to_drm_gem_dma_obj(obj); dma_obj->vaddr = map.vaddr; return obj; } EXPORT_SYMBOL(drm_gem_dma_prime_import_sg_table_vmap); MODULE_DESCRIPTION("DRM DMA memory-management helpers"); MODULE_IMPORT_NS("DMA_BUF"); MODULE_LICENSE("GPL");