// SPDX-License-Identifier: GPL-2.0-only /* * Copyright © 2006-2007 Intel Corporation * * Authors: * Eric Anholt * Dave Airlie * Jesse Barnes */ #include #include #include #include #include #include "intel_bios.h" #include "power.h" #include "psb_drv.h" #include "psb_intel_drv.h" #include "psb_intel_reg.h" /* * LVDS I2C backlight control macros */ #define BRIGHTNESS_MAX_LEVEL 100 #define BRIGHTNESS_MASK 0xFF #define BLC_I2C_TYPE 0x01 #define BLC_PWM_TYPT 0x02 #define BLC_POLARITY_NORMAL 0 #define BLC_POLARITY_INVERSE 1 #define PSB_BLC_MAX_PWM_REG_FREQ (0xFFFE) #define PSB_BLC_MIN_PWM_REG_FREQ (0x2) #define PSB_BLC_PWM_PRECISION_FACTOR (10) #define PSB_BACKLIGHT_PWM_CTL_SHIFT (16) #define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE) struct psb_intel_lvds_priv { /* * Saved LVDO output states */ uint32_t savePP_ON; uint32_t savePP_OFF; uint32_t saveLVDS; uint32_t savePP_CONTROL; uint32_t savePP_CYCLE; uint32_t savePFIT_CONTROL; uint32_t savePFIT_PGM_RATIOS; uint32_t saveBLC_PWM_CTL; struct gma_i2c_chan *i2c_bus; }; /* * Returns the maximum level of the backlight duty cycle field. */ static u32 psb_intel_lvds_get_max_backlight(struct drm_device *dev) { struct drm_psb_private *dev_priv = to_drm_psb_private(dev); u32 ret; if (gma_power_begin(dev, false)) { ret = REG_READ(BLC_PWM_CTL); gma_power_end(dev); } else /* Powered off, use the saved value */ ret = dev_priv->regs.saveBLC_PWM_CTL; /* Top 15bits hold the frequency mask */ ret = (ret & BACKLIGHT_MODULATION_FREQ_MASK) >> BACKLIGHT_MODULATION_FREQ_SHIFT; ret *= 2; /* Return a 16bit range as needed for setting */ if (ret == 0) dev_err(dev->dev, "BL bug: Reg %08x save %08X\n", REG_READ(BLC_PWM_CTL), dev_priv->regs.saveBLC_PWM_CTL); return ret; } /* * Set LVDS backlight level by I2C command * * FIXME: at some point we need to both track this for PM and also * disable runtime pm on MRST if the brightness is nil (ie blanked) */ static int psb_lvds_i2c_set_brightness(struct drm_device *dev, unsigned int level) { struct drm_psb_private *dev_priv = to_drm_psb_private(dev); struct gma_i2c_chan *lvds_i2c_bus = dev_priv->lvds_i2c_bus; u8 out_buf[2]; unsigned int blc_i2c_brightness; struct i2c_msg msgs[] = { { .addr = lvds_i2c_bus->target_addr, .flags = 0, .len = 2, .buf = out_buf, } }; blc_i2c_brightness = BRIGHTNESS_MASK & ((unsigned int)level * BRIGHTNESS_MASK / BRIGHTNESS_MAX_LEVEL); if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE) blc_i2c_brightness = BRIGHTNESS_MASK - blc_i2c_brightness; out_buf[0] = dev_priv->lvds_bl->brightnesscmd; out_buf[1] = (u8)blc_i2c_brightness; if (i2c_transfer(&lvds_i2c_bus->base, msgs, 1) == 1) { dev_dbg(dev->dev, "I2C set brightness.(command, value) (%d, %d)\n", dev_priv->lvds_bl->brightnesscmd, blc_i2c_brightness); return 0; } dev_err(dev->dev, "I2C transfer error\n"); return -1; } static int psb_lvds_pwm_set_brightness(struct drm_device *dev, int level) { struct drm_psb_private *dev_priv = to_drm_psb_private(dev); u32 max_pwm_blc; u32 blc_pwm_duty_cycle; max_pwm_blc = psb_intel_lvds_get_max_backlight(dev); /*BLC_PWM_CTL Should be initiated while backlight device init*/ BUG_ON(max_pwm_blc == 0); blc_pwm_duty_cycle = level * max_pwm_blc / BRIGHTNESS_MAX_LEVEL; if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE) blc_pwm_duty_cycle = max_pwm_blc - blc_pwm_duty_cycle; blc_pwm_duty_cycle &= PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR; REG_WRITE(BLC_PWM_CTL, (max_pwm_blc << PSB_BACKLIGHT_PWM_CTL_SHIFT) | (blc_pwm_duty_cycle)); dev_info(dev->dev, "Backlight lvds set brightness %08x\n", (max_pwm_blc << PSB_BACKLIGHT_PWM_CTL_SHIFT) | (blc_pwm_duty_cycle)); return 0; } /* * Set LVDS backlight level either by I2C or PWM */ void psb_intel_lvds_set_brightness(struct drm_device *dev, int level) { struct drm_psb_private *dev_priv = to_drm_psb_private(dev); dev_dbg(dev->dev, "backlight level is %d\n", level); if (!dev_priv->lvds_bl) { dev_err(dev->dev, "NO LVDS backlight info\n"); return; } if (dev_priv->lvds_bl->type == BLC_I2C_TYPE) psb_lvds_i2c_set_brightness(dev, level); else psb_lvds_pwm_set_brightness(dev, level); } /* * Sets the backlight level. * * level: backlight level, from 0 to psb_intel_lvds_get_max_backlight(). */ static void psb_intel_lvds_set_backlight(struct drm_device *dev, int level) { struct drm_psb_private *dev_priv = to_drm_psb_private(dev); u32 blc_pwm_ctl; if (gma_power_begin(dev, false)) { blc_pwm_ctl = REG_READ(BLC_PWM_CTL); blc_pwm_ctl &= ~BACKLIGHT_DUTY_CYCLE_MASK; REG_WRITE(BLC_PWM_CTL, (blc_pwm_ctl | (level << BACKLIGHT_DUTY_CYCLE_SHIFT))); dev_priv->regs.saveBLC_PWM_CTL = (blc_pwm_ctl | (level << BACKLIGHT_DUTY_CYCLE_SHIFT)); gma_power_end(dev); } else { blc_pwm_ctl = dev_priv->regs.saveBLC_PWM_CTL & ~BACKLIGHT_DUTY_CYCLE_MASK; dev_priv->regs.saveBLC_PWM_CTL = (blc_pwm_ctl | (level << BACKLIGHT_DUTY_CYCLE_SHIFT)); } } /* * Sets the power state for the panel. */ static void psb_intel_lvds_set_power(struct drm_device *dev, bool on) { struct drm_psb_private *dev_priv = to_drm_psb_private(dev); struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; u32 pp_status; if (!gma_power_begin(dev, true)) { dev_err(dev->dev, "set power, chip off!\n"); return; } if (on) { REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) | POWER_TARGET_ON); do { pp_status = REG_READ(PP_STATUS); } while ((pp_status & PP_ON) == 0); psb_intel_lvds_set_backlight(dev, mode_dev->backlight_duty_cycle); } else { psb_intel_lvds_set_backlight(dev, 0); REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) & ~POWER_TARGET_ON); do { pp_status = REG_READ(PP_STATUS); } while (pp_status & PP_ON); } gma_power_end(dev); } static void psb_intel_lvds_encoder_dpms(struct drm_encoder *encoder, int mode) { struct drm_device *dev = encoder->dev; if (mode == DRM_MODE_DPMS_ON) psb_intel_lvds_set_power(dev, true); else psb_intel_lvds_set_power(dev, false); /* XXX: We never power down the LVDS pairs. */ } static void psb_intel_lvds_save(struct drm_connector *connector) { struct drm_device *dev = connector->dev; struct drm_psb_private *dev_priv = to_drm_psb_private(dev); struct gma_encoder *gma_encoder = gma_attached_encoder(connector); struct psb_intel_lvds_priv *lvds_priv = (struct psb_intel_lvds_priv *)gma_encoder->dev_priv; lvds_priv->savePP_ON = REG_READ(LVDSPP_ON); lvds_priv->savePP_OFF = REG_READ(LVDSPP_OFF); lvds_priv->saveLVDS = REG_READ(LVDS); lvds_priv->savePP_CONTROL = REG_READ(PP_CONTROL); lvds_priv->savePP_CYCLE = REG_READ(PP_CYCLE); /*lvds_priv->savePP_DIVISOR = REG_READ(PP_DIVISOR);*/ lvds_priv->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL); lvds_priv->savePFIT_CONTROL = REG_READ(PFIT_CONTROL); lvds_priv->savePFIT_PGM_RATIOS = REG_READ(PFIT_PGM_RATIOS); /*TODO: move backlight_duty_cycle to psb_intel_lvds_priv*/ dev_priv->backlight_duty_cycle = (dev_priv->regs.saveBLC_PWM_CTL & BACKLIGHT_DUTY_CYCLE_MASK); /* * If the light is off at server startup, * just make it full brightness */ if (dev_priv->backlight_duty_cycle == 0) dev_priv->backlight_duty_cycle = psb_intel_lvds_get_max_backlight(dev); dev_dbg(dev->dev, "(0x%x, 0x%x, 0x%x, 0x%x, 0x%x, 0x%x)\n", lvds_priv->savePP_ON, lvds_priv->savePP_OFF, lvds_priv->saveLVDS, lvds_priv->savePP_CONTROL, lvds_priv->savePP_CYCLE, lvds_priv->saveBLC_PWM_CTL); } static void psb_intel_lvds_restore(struct drm_connector *connector) { struct drm_device *dev = connector->dev; u32 pp_status; struct gma_encoder *gma_encoder = gma_attached_encoder(connector); struct psb_intel_lvds_priv *lvds_priv = (struct psb_intel_lvds_priv *)gma_encoder->dev_priv; dev_dbg(dev->dev, "(0x%x, 0x%x, 0x%x, 0x%x, 0x%x, 0x%x)\n", lvds_priv->savePP_ON, lvds_priv->savePP_OFF, lvds_priv->saveLVDS, lvds_priv->savePP_CONTROL, lvds_priv->savePP_CYCLE, lvds_priv->saveBLC_PWM_CTL); REG_WRITE(BLC_PWM_CTL, lvds_priv->saveBLC_PWM_CTL); REG_WRITE(PFIT_CONTROL, lvds_priv->savePFIT_CONTROL); REG_WRITE(PFIT_PGM_RATIOS, lvds_priv->savePFIT_PGM_RATIOS); REG_WRITE(LVDSPP_ON, lvds_priv->savePP_ON); REG_WRITE(LVDSPP_OFF, lvds_priv->savePP_OFF); /*REG_WRITE(PP_DIVISOR, lvds_priv->savePP_DIVISOR);*/ REG_WRITE(PP_CYCLE, lvds_priv->savePP_CYCLE); REG_WRITE(PP_CONTROL, lvds_priv->savePP_CONTROL); REG_WRITE(LVDS, lvds_priv->saveLVDS); if (lvds_priv->savePP_CONTROL & POWER_TARGET_ON) { REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) | POWER_TARGET_ON); do { pp_status = REG_READ(PP_STATUS); } while ((pp_status & PP_ON) == 0); } else { REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) & ~POWER_TARGET_ON); do { pp_status = REG_READ(PP_STATUS); } while (pp_status & PP_ON); } } enum drm_mode_status psb_intel_lvds_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { struct drm_psb_private *dev_priv = to_drm_psb_private(connector->dev); struct gma_encoder *gma_encoder = gma_attached_encoder(connector); struct drm_display_mode *fixed_mode = dev_priv->mode_dev.panel_fixed_mode; if (gma_encoder->type == INTEL_OUTPUT_MIPI2) fixed_mode = dev_priv->mode_dev.panel_fixed_mode2; /* just in case */ if (mode->flags & DRM_MODE_FLAG_DBLSCAN) return MODE_NO_DBLESCAN; /* just in case */ if (mode->flags & DRM_MODE_FLAG_INTERLACE) return MODE_NO_INTERLACE; if (fixed_mode) { if (mode->hdisplay > fixed_mode->hdisplay) return MODE_PANEL; if (mode->vdisplay > fixed_mode->vdisplay) return MODE_PANEL; } return MODE_OK; } bool psb_intel_lvds_mode_fixup(struct drm_encoder *encoder, const struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { struct drm_device *dev = encoder->dev; struct drm_psb_private *dev_priv = to_drm_psb_private(dev); struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; struct gma_crtc *gma_crtc = to_gma_crtc(encoder->crtc); struct drm_encoder *tmp_encoder; struct drm_display_mode *panel_fixed_mode = mode_dev->panel_fixed_mode; struct gma_encoder *gma_encoder = to_gma_encoder(encoder); if (gma_encoder->type == INTEL_OUTPUT_MIPI2) panel_fixed_mode = mode_dev->panel_fixed_mode2; /* PSB requires the LVDS is on pipe B, MRST has only one pipe anyway */ if (!IS_MRST(dev) && gma_crtc->pipe == 0) { pr_err("Can't support LVDS on pipe A\n"); return false; } if (IS_MRST(dev) && gma_crtc->pipe != 0) { pr_err("Must use PIPE A\n"); return false; } /* Should never happen!! */ list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list, head) { if (tmp_encoder != encoder && tmp_encoder->crtc == encoder->crtc) { pr_err("Can't enable LVDS and another encoder on the same pipe\n"); return false; } } /* * If we have timings from the BIOS for the panel, put them in * to the adjusted mode. The CRTC will be set up for this mode, * with the panel scaling set up to source from the H/VDisplay * of the original mode. */ if (panel_fixed_mode != NULL) { adjusted_mode->hdisplay = panel_fixed_mode->hdisplay; adjusted_mode->hsync_start = panel_fixed_mode->hsync_start; adjusted_mode->hsync_end = panel_fixed_mode->hsync_end; adjusted_mode->htotal = panel_fixed_mode->htotal; adjusted_mode->vdisplay = panel_fixed_mode->vdisplay; adjusted_mode->vsync_start = panel_fixed_mode->vsync_start; adjusted_mode->vsync_end = panel_fixed_mode->vsync_end; adjusted_mode->vtotal = panel_fixed_mode->vtotal; adjusted_mode->clock = panel_fixed_mode->clock; drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V); } /* * XXX: It would be nice to support lower refresh rates on the * panels to reduce power consumption, and perhaps match the * user's requested refresh rate. */ return true; } static void psb_intel_lvds_prepare(struct drm_encoder *encoder) { struct drm_device *dev = encoder->dev; struct drm_psb_private *dev_priv = to_drm_psb_private(dev); struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; if (!gma_power_begin(dev, true)) return; mode_dev->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL); mode_dev->backlight_duty_cycle = (mode_dev->saveBLC_PWM_CTL & BACKLIGHT_DUTY_CYCLE_MASK); psb_intel_lvds_set_power(dev, false); gma_power_end(dev); } static void psb_intel_lvds_commit(struct drm_encoder *encoder) { struct drm_device *dev = encoder->dev; struct drm_psb_private *dev_priv = to_drm_psb_private(dev); struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; if (mode_dev->backlight_duty_cycle == 0) mode_dev->backlight_duty_cycle = psb_intel_lvds_get_max_backlight(dev); psb_intel_lvds_set_power(dev, true); } static void psb_intel_lvds_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { struct drm_device *dev = encoder->dev; struct drm_psb_private *dev_priv = to_drm_psb_private(dev); u32 pfit_control; /* * The LVDS pin pair will already have been turned on in the * psb_intel_crtc_mode_set since it has a large impact on the DPLL * settings. */ /* * Enable automatic panel scaling so that non-native modes fill the * screen. Should be enabled before the pipe is enabled, according to * register description and PRM. */ if (mode->hdisplay != adjusted_mode->hdisplay || mode->vdisplay != adjusted_mode->vdisplay) pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE | HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR | HORIZ_INTERP_BILINEAR); else pfit_control = 0; if (dev_priv->lvds_dither) pfit_control |= PANEL_8TO6_DITHER_ENABLE; REG_WRITE(PFIT_CONTROL, pfit_control); } /* * Return the list of DDC modes if available, or the BIOS fixed mode otherwise. */ static int psb_intel_lvds_get_modes(struct drm_connector *connector) { struct drm_device *dev = connector->dev; struct drm_psb_private *dev_priv = to_drm_psb_private(dev); struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; int ret = 0; if (!IS_MRST(dev)) ret = psb_intel_ddc_get_modes(connector, connector->ddc); if (ret) return ret; if (mode_dev->panel_fixed_mode != NULL) { struct drm_display_mode *mode = drm_mode_duplicate(dev, mode_dev->panel_fixed_mode); if (!mode) return 0; drm_mode_probed_add(connector, mode); return 1; } return 0; } void psb_intel_lvds_destroy(struct drm_connector *connector) { struct gma_connector *gma_connector = to_gma_connector(connector); struct gma_i2c_chan *ddc_bus = to_gma_i2c_chan(connector->ddc); gma_i2c_destroy(ddc_bus); drm_connector_cleanup(connector); kfree(gma_connector); } int psb_intel_lvds_set_property(struct drm_connector *connector, struct drm_property *property, uint64_t value) { struct drm_encoder *encoder = connector->encoder; if (!encoder) return -1; if (!strcmp(property->name, "scaling mode")) { struct gma_crtc *crtc = to_gma_crtc(encoder->crtc); uint64_t curval; if (!crtc) goto set_prop_error; switch (value) { case DRM_MODE_SCALE_FULLSCREEN: break; case DRM_MODE_SCALE_NO_SCALE: break; case DRM_MODE_SCALE_ASPECT: break; default: goto set_prop_error; } if (drm_object_property_get_value(&connector->base, property, &curval)) goto set_prop_error; if (curval == value) goto set_prop_done; if (drm_object_property_set_value(&connector->base, property, value)) goto set_prop_error; if (crtc->saved_mode.hdisplay != 0 && crtc->saved_mode.vdisplay != 0) { if (!drm_crtc_helper_set_mode(encoder->crtc, &crtc->saved_mode, encoder->crtc->x, encoder->crtc->y, encoder->crtc->primary->fb)) goto set_prop_error; } } else if (!strcmp(property->name, "backlight")) { if (drm_object_property_set_value(&connector->base, property, value)) goto set_prop_error; else gma_backlight_set(encoder->dev, value); } else if (!strcmp(property->name, "DPMS")) { const struct drm_encoder_helper_funcs *hfuncs = encoder->helper_private; hfuncs->dpms(encoder, value); } set_prop_done: return 0; set_prop_error: return -1; } static const struct drm_encoder_helper_funcs psb_intel_lvds_helper_funcs = { .dpms = psb_intel_lvds_encoder_dpms, .mode_fixup = psb_intel_lvds_mode_fixup, .prepare = psb_intel_lvds_prepare, .mode_set = psb_intel_lvds_mode_set, .commit = psb_intel_lvds_commit, }; const struct drm_connector_helper_funcs psb_intel_lvds_connector_helper_funcs = { .get_modes = psb_intel_lvds_get_modes, .mode_valid = psb_intel_lvds_mode_valid, .best_encoder = gma_best_encoder, }; const struct drm_connector_funcs psb_intel_lvds_connector_funcs = { .dpms = drm_helper_connector_dpms, .fill_modes = drm_helper_probe_single_connector_modes, .set_property = psb_intel_lvds_set_property, .destroy = psb_intel_lvds_destroy, }; /** * psb_intel_lvds_init - setup LVDS connectors on this device * @dev: drm device * @mode_dev: mode device * * Create the connector, register the LVDS DDC bus, and try to figure out what * modes we can display on the LVDS panel (if present). */ void psb_intel_lvds_init(struct drm_device *dev, struct psb_intel_mode_device *mode_dev) { struct gma_encoder *gma_encoder; struct gma_connector *gma_connector; struct psb_intel_lvds_priv *lvds_priv; struct drm_connector *connector; struct drm_encoder *encoder; struct drm_display_mode *scan; /* *modes, *bios_mode; */ struct drm_crtc *crtc; struct drm_psb_private *dev_priv = to_drm_psb_private(dev); struct gma_i2c_chan *ddc_bus; u32 lvds; int pipe; int ret; gma_encoder = kzalloc(sizeof(struct gma_encoder), GFP_KERNEL); if (!gma_encoder) { dev_err(dev->dev, "gma_encoder allocation error\n"); return; } encoder = &gma_encoder->base; gma_connector = kzalloc(sizeof(struct gma_connector), GFP_KERNEL); if (!gma_connector) { dev_err(dev->dev, "gma_connector allocation error\n"); goto err_free_encoder; } lvds_priv = kzalloc(sizeof(struct psb_intel_lvds_priv), GFP_KERNEL); if (!lvds_priv) { dev_err(dev->dev, "LVDS private allocation error\n"); goto err_free_connector; } gma_encoder->dev_priv = lvds_priv; connector = &gma_connector->base; gma_connector->save = psb_intel_lvds_save; gma_connector->restore = psb_intel_lvds_restore; /* Set up the DDC bus. */ ddc_bus = gma_i2c_create(dev, GPIOC, "LVDSDDC_C"); if (!ddc_bus) { dev_printk(KERN_ERR, dev->dev, "DDC bus registration " "failed.\n"); goto err_free_lvds_priv; } ret = drm_connector_init_with_ddc(dev, connector, &psb_intel_lvds_connector_funcs, DRM_MODE_CONNECTOR_LVDS, &ddc_bus->base); if (ret) goto err_ddc_destroy; ret = drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_LVDS); if (ret) goto err_connector_cleanup; gma_connector_attach_encoder(gma_connector, gma_encoder); gma_encoder->type = INTEL_OUTPUT_LVDS; drm_encoder_helper_add(encoder, &psb_intel_lvds_helper_funcs); drm_connector_helper_add(connector, &psb_intel_lvds_connector_helper_funcs); connector->display_info.subpixel_order = SubPixelHorizontalRGB; connector->interlace_allowed = false; connector->doublescan_allowed = false; /*Attach connector properties*/ drm_object_attach_property(&connector->base, dev->mode_config.scaling_mode_property, DRM_MODE_SCALE_FULLSCREEN); drm_object_attach_property(&connector->base, dev_priv->backlight_property, BRIGHTNESS_MAX_LEVEL); /* * Set up I2C bus * FIXME: distroy i2c_bus when exit */ lvds_priv->i2c_bus = gma_i2c_create(dev, GPIOB, "LVDSBLC_B"); if (!lvds_priv->i2c_bus) { dev_printk(KERN_ERR, dev->dev, "I2C bus registration failed.\n"); goto err_encoder_cleanup; } lvds_priv->i2c_bus->target_addr = 0x2C; dev_priv->lvds_i2c_bus = lvds_priv->i2c_bus; /* * LVDS discovery: * 1) check for EDID on DDC * 2) check for VBT data * 3) check to see if LVDS is already on * if none of the above, no panel * 4) make sure lid is open * if closed, act like it's not there for now */ /* * Attempt to get the fixed panel mode from DDC. Assume that the * preferred mode is the right one. */ mutex_lock(&dev->mode_config.mutex); psb_intel_ddc_get_modes(connector, &ddc_bus->base); list_for_each_entry(scan, &connector->probed_modes, head) { if (scan->type & DRM_MODE_TYPE_PREFERRED) { mode_dev->panel_fixed_mode = drm_mode_duplicate(dev, scan); DRM_DEBUG_KMS("Using mode from DDC\n"); goto out; /* FIXME: check for quirks */ } } /* Failed to get EDID, what about VBT? do we need this? */ if (dev_priv->lfp_lvds_vbt_mode) { mode_dev->panel_fixed_mode = drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode); if (mode_dev->panel_fixed_mode) { mode_dev->panel_fixed_mode->type |= DRM_MODE_TYPE_PREFERRED; DRM_DEBUG_KMS("Using mode from VBT\n"); goto out; } } /* * If we didn't get EDID, try checking if the panel is already turned * on. If so, assume that whatever is currently programmed is the * correct mode. */ lvds = REG_READ(LVDS); pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0; crtc = psb_intel_get_crtc_from_pipe(dev, pipe); if (crtc && (lvds & LVDS_PORT_EN)) { mode_dev->panel_fixed_mode = psb_intel_crtc_mode_get(dev, crtc); if (mode_dev->panel_fixed_mode) { mode_dev->panel_fixed_mode->type |= DRM_MODE_TYPE_PREFERRED; DRM_DEBUG_KMS("Using pre-programmed mode\n"); goto out; /* FIXME: check for quirks */ } } /* If we still don't have a mode after all that, give up. */ if (!mode_dev->panel_fixed_mode) { dev_err(dev->dev, "Found no modes on the lvds, ignoring the LVDS\n"); goto err_unlock; } /* * Blacklist machines with BIOSes that list an LVDS panel without * actually having one. */ out: mutex_unlock(&dev->mode_config.mutex); return; err_unlock: mutex_unlock(&dev->mode_config.mutex); gma_i2c_destroy(lvds_priv->i2c_bus); err_encoder_cleanup: drm_encoder_cleanup(encoder); err_connector_cleanup: drm_connector_cleanup(connector); err_ddc_destroy: gma_i2c_destroy(ddc_bus); err_free_lvds_priv: kfree(lvds_priv); err_free_connector: kfree(gma_connector); err_free_encoder: kfree(gma_encoder); }