// SPDX-License-Identifier: MIT /* * Copyright © 2020 Intel Corporation */ #include "i915_reg.h" #include "intel_de.h" #include "intel_display_types.h" #include "intel_fb.h" #include "skl_scaler.h" #include "skl_universal_plane.h" /* * The hardware phase 0.0 refers to the center of the pixel. * We want to start from the top/left edge which is phase * -0.5. That matches how the hardware calculates the scaling * factors (from top-left of the first pixel to bottom-right * of the last pixel, as opposed to the pixel centers). * * For 4:2:0 subsampled chroma planes we obviously have to * adjust that so that the chroma sample position lands in * the right spot. * * Note that for packed YCbCr 4:2:2 formats there is no way to * control chroma siting. The hardware simply replicates the * chroma samples for both of the luma samples, and thus we don't * actually get the expected MPEG2 chroma siting convention :( * The same behaviour is observed on pre-SKL platforms as well. * * Theory behind the formula (note that we ignore sub-pixel * source coordinates): * s = source sample position * d = destination sample position * * Downscaling 4:1: * -0.5 * | 0.0 * | | 1.5 (initial phase) * | | | * v v v * | s | s | s | s | * | d | * * Upscaling 1:4: * -0.5 * | -0.375 (initial phase) * | | 0.0 * | | | * v v v * | s | * | d | d | d | d | */ static u16 skl_scaler_calc_phase(int sub, int scale, bool chroma_cosited) { int phase = -0x8000; u16 trip = 0; if (chroma_cosited) phase += (sub - 1) * 0x8000 / sub; phase += scale / (2 * sub); /* * Hardware initial phase limited to [-0.5:1.5]. * Since the max hardware scale factor is 3.0, we * should never actually excdeed 1.0 here. */ WARN_ON(phase < -0x8000 || phase > 0x18000); if (phase < 0) phase = 0x10000 + phase; else trip = PS_PHASE_TRIP; return ((phase >> 2) & PS_PHASE_MASK) | trip; } #define SKL_MIN_SRC_W 8 #define SKL_MAX_SRC_W 4096 #define SKL_MIN_SRC_H 8 #define SKL_MAX_SRC_H 4096 #define SKL_MIN_DST_W 8 #define SKL_MAX_DST_W 4096 #define SKL_MIN_DST_H 8 #define SKL_MAX_DST_H 4096 #define ICL_MAX_SRC_W 5120 #define ICL_MAX_SRC_H 4096 #define ICL_MAX_DST_W 5120 #define ICL_MAX_DST_H 4096 #define TGL_MAX_SRC_W 5120 #define TGL_MAX_SRC_H 8192 #define TGL_MAX_DST_W 8192 #define TGL_MAX_DST_H 8192 #define MTL_MAX_SRC_W 4096 #define MTL_MAX_SRC_H 8192 #define MTL_MAX_DST_W 8192 #define MTL_MAX_DST_H 8192 #define SKL_MIN_YUV_420_SRC_W 16 #define SKL_MIN_YUV_420_SRC_H 16 static int skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach, unsigned int scaler_user, int *scaler_id, int src_w, int src_h, int dst_w, int dst_h, const struct drm_format_info *format, u64 modifier, bool need_scaler) { struct intel_crtc_scaler_state *scaler_state = &crtc_state->scaler_state; struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); const struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode; int pipe_src_w = drm_rect_width(&crtc_state->pipe_src); int pipe_src_h = drm_rect_height(&crtc_state->pipe_src); int min_src_w, min_src_h, min_dst_w, min_dst_h; int max_src_w, max_src_h, max_dst_w, max_dst_h; /* * Src coordinates are already rotated by 270 degrees for * the 90/270 degree plane rotation cases (to match the * GTT mapping), hence no need to account for rotation here. */ if (src_w != dst_w || src_h != dst_h) need_scaler = true; /* * Scaling/fitting not supported in IF-ID mode in GEN9+ * TODO: Interlace fetch mode doesn't support YUV420 planar formats. * Once NV12 is enabled, handle it here while allocating scaler * for NV12. */ if (DISPLAY_VER(dev_priv) >= 9 && crtc_state->hw.enable && need_scaler && adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) { drm_dbg_kms(&dev_priv->drm, "Pipe/Plane scaling not supported with IF-ID mode\n"); return -EINVAL; } /* * if plane is being disabled or scaler is no more required or force detach * - free scaler binded to this plane/crtc * - in order to do this, update crtc->scaler_usage * * Here scaler state in crtc_state is set free so that * scaler can be assigned to other user. Actual register * update to free the scaler is done in plane/panel-fit programming. * For this purpose crtc/plane_state->scaler_id isn't reset here. */ if (force_detach || !need_scaler) { if (*scaler_id >= 0) { scaler_state->scaler_users &= ~(1 << scaler_user); scaler_state->scalers[*scaler_id].in_use = 0; drm_dbg_kms(&dev_priv->drm, "scaler_user index %u.%u: " "Staged freeing scaler id %d scaler_users = 0x%x\n", crtc->pipe, scaler_user, *scaler_id, scaler_state->scaler_users); *scaler_id = -1; } return 0; } if (format && intel_format_info_is_yuv_semiplanar(format, modifier) && (src_h < SKL_MIN_YUV_420_SRC_H || src_w < SKL_MIN_YUV_420_SRC_W)) { drm_dbg_kms(&dev_priv->drm, "Planar YUV: src dimensions not met\n"); return -EINVAL; } min_src_w = SKL_MIN_SRC_W; min_src_h = SKL_MIN_SRC_H; min_dst_w = SKL_MIN_DST_W; min_dst_h = SKL_MIN_DST_H; if (DISPLAY_VER(dev_priv) < 11) { max_src_w = SKL_MAX_SRC_W; max_src_h = SKL_MAX_SRC_H; max_dst_w = SKL_MAX_DST_W; max_dst_h = SKL_MAX_DST_H; } else if (DISPLAY_VER(dev_priv) < 12) { max_src_w = ICL_MAX_SRC_W; max_src_h = ICL_MAX_SRC_H; max_dst_w = ICL_MAX_DST_W; max_dst_h = ICL_MAX_DST_H; } else if (DISPLAY_VER(dev_priv) < 14) { max_src_w = TGL_MAX_SRC_W; max_src_h = TGL_MAX_SRC_H; max_dst_w = TGL_MAX_DST_W; max_dst_h = TGL_MAX_DST_H; } else { max_src_w = MTL_MAX_SRC_W; max_src_h = MTL_MAX_SRC_H; max_dst_w = MTL_MAX_DST_W; max_dst_h = MTL_MAX_DST_H; } /* range checks */ if (src_w < min_src_w || src_h < min_src_h || dst_w < min_dst_w || dst_h < min_dst_h || src_w > max_src_w || src_h > max_src_h || dst_w > max_dst_w || dst_h > max_dst_h) { drm_dbg_kms(&dev_priv->drm, "scaler_user index %u.%u: src %ux%u dst %ux%u " "size is out of scaler range\n", crtc->pipe, scaler_user, src_w, src_h, dst_w, dst_h); return -EINVAL; } /* * The pipe scaler does not use all the bits of PIPESRC, at least * on the earlier platforms. So even when we're scaling a plane * the *pipe* source size must not be too large. For simplicity * we assume the limits match the scaler destination size limits. * Might not be 100% accurate on all platforms, but good enough for * now. */ if (pipe_src_w > max_dst_w || pipe_src_h > max_dst_h) { drm_dbg_kms(&dev_priv->drm, "scaler_user index %u.%u: pipe src size %ux%u " "is out of scaler range\n", crtc->pipe, scaler_user, pipe_src_w, pipe_src_h); return -EINVAL; } /* mark this plane as a scaler user in crtc_state */ scaler_state->scaler_users |= (1 << scaler_user); drm_dbg_kms(&dev_priv->drm, "scaler_user index %u.%u: " "staged scaling request for %ux%u->%ux%u scaler_users = 0x%x\n", crtc->pipe, scaler_user, src_w, src_h, dst_w, dst_h, scaler_state->scaler_users); return 0; } int skl_update_scaler_crtc(struct intel_crtc_state *crtc_state) { const struct drm_display_mode *pipe_mode = &crtc_state->hw.pipe_mode; int width, height; if (crtc_state->pch_pfit.enabled) { width = drm_rect_width(&crtc_state->pch_pfit.dst); height = drm_rect_height(&crtc_state->pch_pfit.dst); } else { width = pipe_mode->crtc_hdisplay; height = pipe_mode->crtc_vdisplay; } return skl_update_scaler(crtc_state, !crtc_state->hw.active, SKL_CRTC_INDEX, &crtc_state->scaler_state.scaler_id, drm_rect_width(&crtc_state->pipe_src), drm_rect_height(&crtc_state->pipe_src), width, height, NULL, 0, crtc_state->pch_pfit.enabled); } /** * skl_update_scaler_plane - Stages update to scaler state for a given plane. * @crtc_state: crtc's scaler state * @plane_state: atomic plane state to update * * Return * 0 - scaler_usage updated successfully * error - requested scaling cannot be supported or other error condition */ int skl_update_scaler_plane(struct intel_crtc_state *crtc_state, struct intel_plane_state *plane_state) { struct intel_plane *intel_plane = to_intel_plane(plane_state->uapi.plane); struct drm_i915_private *dev_priv = to_i915(intel_plane->base.dev); struct drm_framebuffer *fb = plane_state->hw.fb; bool force_detach = !fb || !plane_state->uapi.visible; bool need_scaler = false; /* Pre-gen11 and SDR planes always need a scaler for planar formats. */ if (!icl_is_hdr_plane(dev_priv, intel_plane->id) && fb && intel_format_info_is_yuv_semiplanar(fb->format, fb->modifier)) need_scaler = true; return skl_update_scaler(crtc_state, force_detach, drm_plane_index(&intel_plane->base), &plane_state->scaler_id, drm_rect_width(&plane_state->uapi.src) >> 16, drm_rect_height(&plane_state->uapi.src) >> 16, drm_rect_width(&plane_state->uapi.dst), drm_rect_height(&plane_state->uapi.dst), fb ? fb->format : NULL, fb ? fb->modifier : 0, need_scaler); } static int intel_atomic_setup_scaler(struct intel_crtc_scaler_state *scaler_state, int num_scalers_need, struct intel_crtc *intel_crtc, const char *name, int idx, struct intel_plane_state *plane_state, int *scaler_id) { struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev); int j; u32 mode; if (*scaler_id < 0) { /* find a free scaler */ for (j = 0; j < intel_crtc->num_scalers; j++) { if (scaler_state->scalers[j].in_use) continue; *scaler_id = j; scaler_state->scalers[*scaler_id].in_use = 1; break; } } if (drm_WARN(&dev_priv->drm, *scaler_id < 0, "Cannot find scaler for %s:%d\n", name, idx)) return -EINVAL; /* set scaler mode */ if (plane_state && plane_state->hw.fb && plane_state->hw.fb->format->is_yuv && plane_state->hw.fb->format->num_planes > 1) { struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane); if (DISPLAY_VER(dev_priv) == 9) { mode = SKL_PS_SCALER_MODE_NV12; } else if (icl_is_hdr_plane(dev_priv, plane->id)) { /* * On gen11+'s HDR planes we only use the scaler for * scaling. They have a dedicated chroma upsampler, so * we don't need the scaler to upsample the UV plane. */ mode = PS_SCALER_MODE_NORMAL; } else { struct intel_plane *linked = plane_state->planar_linked_plane; mode = PS_SCALER_MODE_PLANAR; if (linked) mode |= PS_BINDING_Y_PLANE(linked->id); } } else if (DISPLAY_VER(dev_priv) >= 10) { mode = PS_SCALER_MODE_NORMAL; } else if (num_scalers_need == 1 && intel_crtc->num_scalers > 1) { /* * when only 1 scaler is in use on a pipe with 2 scalers * scaler 0 operates in high quality (HQ) mode. * In this case use scaler 0 to take advantage of HQ mode */ scaler_state->scalers[*scaler_id].in_use = 0; *scaler_id = 0; scaler_state->scalers[0].in_use = 1; mode = SKL_PS_SCALER_MODE_HQ; } else { mode = SKL_PS_SCALER_MODE_DYN; } /* * FIXME: we should also check the scaler factors for pfit, so * this shouldn't be tied directly to planes. */ if (plane_state && plane_state->hw.fb) { const struct drm_framebuffer *fb = plane_state->hw.fb; const struct drm_rect *src = &plane_state->uapi.src; const struct drm_rect *dst = &plane_state->uapi.dst; int hscale, vscale, max_vscale, max_hscale; /* * FIXME: When two scalers are needed, but only one of * them needs to downscale, we should make sure that * the one that needs downscaling support is assigned * as the first scaler, so we don't reject downscaling * unnecessarily. */ if (DISPLAY_VER(dev_priv) >= 14) { /* * On versions 14 and up, only the first * scaler supports a vertical scaling factor * of more than 1.0, while a horizontal * scaling factor of 3.0 is supported. */ max_hscale = 0x30000 - 1; if (*scaler_id == 0) max_vscale = 0x30000 - 1; else max_vscale = 0x10000; } else if (DISPLAY_VER(dev_priv) >= 10 || !intel_format_info_is_yuv_semiplanar(fb->format, fb->modifier)) { max_hscale = 0x30000 - 1; max_vscale = 0x30000 - 1; } else { max_hscale = 0x20000 - 1; max_vscale = 0x20000 - 1; } /* * FIXME: We should change the if-else block above to * support HQ vs dynamic scaler properly. */ /* Check if required scaling is within limits */ hscale = drm_rect_calc_hscale(src, dst, 1, max_hscale); vscale = drm_rect_calc_vscale(src, dst, 1, max_vscale); if (hscale < 0 || vscale < 0) { drm_dbg_kms(&dev_priv->drm, "Scaler %d doesn't support required plane scaling\n", *scaler_id); drm_rect_debug_print("src: ", src, true); drm_rect_debug_print("dst: ", dst, false); return -EINVAL; } } drm_dbg_kms(&dev_priv->drm, "Attached scaler id %u.%u to %s:%d\n", intel_crtc->pipe, *scaler_id, name, idx); scaler_state->scalers[*scaler_id].mode = mode; return 0; } /** * intel_atomic_setup_scalers() - setup scalers for crtc per staged requests * @dev_priv: i915 device * @intel_crtc: intel crtc * @crtc_state: incoming crtc_state to validate and setup scalers * * This function sets up scalers based on staged scaling requests for * a @crtc and its planes. It is called from crtc level check path. If request * is a supportable request, it attaches scalers to requested planes and crtc. * * This function takes into account the current scaler(s) in use by any planes * not being part of this atomic state * * Returns: * 0 - scalers were setup successfully * error code - otherwise */ int intel_atomic_setup_scalers(struct drm_i915_private *dev_priv, struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state) { struct drm_plane *plane = NULL; struct intel_plane *intel_plane; struct intel_crtc_scaler_state *scaler_state = &crtc_state->scaler_state; struct drm_atomic_state *drm_state = crtc_state->uapi.state; struct intel_atomic_state *intel_state = to_intel_atomic_state(drm_state); int num_scalers_need; int i; num_scalers_need = hweight32(scaler_state->scaler_users); /* * High level flow: * - staged scaler requests are already in scaler_state->scaler_users * - check whether staged scaling requests can be supported * - add planes using scalers that aren't in current transaction * - assign scalers to requested users * - as part of plane commit, scalers will be committed * (i.e., either attached or detached) to respective planes in hw * - as part of crtc_commit, scaler will be either attached or detached * to crtc in hw */ /* fail if required scalers > available scalers */ if (num_scalers_need > intel_crtc->num_scalers) { drm_dbg_kms(&dev_priv->drm, "Too many scaling requests %d > %d\n", num_scalers_need, intel_crtc->num_scalers); return -EINVAL; } /* walkthrough scaler_users bits and start assigning scalers */ for (i = 0; i < sizeof(scaler_state->scaler_users) * 8; i++) { struct intel_plane_state *plane_state = NULL; int *scaler_id; const char *name; int idx, ret; /* skip if scaler not required */ if (!(scaler_state->scaler_users & (1 << i))) continue; if (i == SKL_CRTC_INDEX) { name = "CRTC"; idx = intel_crtc->base.base.id; /* panel fitter case: assign as a crtc scaler */ scaler_id = &scaler_state->scaler_id; } else { name = "PLANE"; /* plane scaler case: assign as a plane scaler */ /* find the plane that set the bit as scaler_user */ plane = drm_state->planes[i].ptr; /* * to enable/disable hq mode, add planes that are using scaler * into this transaction */ if (!plane) { struct drm_plane_state *state; /* * GLK+ scalers don't have a HQ mode so it * isn't necessary to change between HQ and dyn mode * on those platforms. */ if (DISPLAY_VER(dev_priv) >= 10) continue; plane = drm_plane_from_index(&dev_priv->drm, i); state = drm_atomic_get_plane_state(drm_state, plane); if (IS_ERR(state)) { drm_dbg_kms(&dev_priv->drm, "Failed to add [PLANE:%d] to drm_state\n", plane->base.id); return PTR_ERR(state); } } intel_plane = to_intel_plane(plane); idx = plane->base.id; /* plane on different crtc cannot be a scaler user of this crtc */ if (drm_WARN_ON(&dev_priv->drm, intel_plane->pipe != intel_crtc->pipe)) continue; plane_state = intel_atomic_get_new_plane_state(intel_state, intel_plane); scaler_id = &plane_state->scaler_id; } ret = intel_atomic_setup_scaler(scaler_state, num_scalers_need, intel_crtc, name, idx, plane_state, scaler_id); if (ret < 0) return ret; } return 0; } static int glk_coef_tap(int i) { return i % 7; } static u16 glk_nearest_filter_coef(int t) { return t == 3 ? 0x0800 : 0x3000; } /* * Theory behind setting nearest-neighbor integer scaling: * * 17 phase of 7 taps requires 119 coefficients in 60 dwords per set. * The letter represents the filter tap (D is the center tap) and the number * represents the coefficient set for a phase (0-16). * * +------------+------------------------+------------------------+ * |Index value | Data value coeffient 1 | Data value coeffient 2 | * +------------+------------------------+------------------------+ * | 00h | B0 | A0 | * +------------+------------------------+------------------------+ * | 01h | D0 | C0 | * +------------+------------------------+------------------------+ * | 02h | F0 | E0 | * +------------+------------------------+------------------------+ * | 03h | A1 | G0 | * +------------+------------------------+------------------------+ * | 04h | C1 | B1 | * +------------+------------------------+------------------------+ * | ... | ... | ... | * +------------+------------------------+------------------------+ * | 38h | B16 | A16 | * +------------+------------------------+------------------------+ * | 39h | D16 | C16 | * +------------+------------------------+------------------------+ * | 3Ah | F16 | C16 | * +------------+------------------------+------------------------+ * | 3Bh | Reserved | G16 | * +------------+------------------------+------------------------+ * * To enable nearest-neighbor scaling: program scaler coefficents with * the center tap (Dxx) values set to 1 and all other values set to 0 as per * SCALER_COEFFICIENT_FORMAT * */ static void glk_program_nearest_filter_coefs(struct drm_i915_private *dev_priv, enum pipe pipe, int id, int set) { int i; intel_de_write_fw(dev_priv, GLK_PS_COEF_INDEX_SET(pipe, id, set), PS_COEF_INDEX_AUTO_INC); for (i = 0; i < 17 * 7; i += 2) { u32 tmp; int t; t = glk_coef_tap(i); tmp = glk_nearest_filter_coef(t); t = glk_coef_tap(i + 1); tmp |= glk_nearest_filter_coef(t) << 16; intel_de_write_fw(dev_priv, GLK_PS_COEF_DATA_SET(pipe, id, set), tmp); } intel_de_write_fw(dev_priv, GLK_PS_COEF_INDEX_SET(pipe, id, set), 0); } static u32 skl_scaler_get_filter_select(enum drm_scaling_filter filter, int set) { if (filter == DRM_SCALING_FILTER_NEAREST_NEIGHBOR) { return (PS_FILTER_PROGRAMMED | PS_Y_VERT_FILTER_SELECT(set) | PS_Y_HORZ_FILTER_SELECT(set) | PS_UV_VERT_FILTER_SELECT(set) | PS_UV_HORZ_FILTER_SELECT(set)); } return PS_FILTER_MEDIUM; } static void skl_scaler_setup_filter(struct drm_i915_private *dev_priv, enum pipe pipe, int id, int set, enum drm_scaling_filter filter) { switch (filter) { case DRM_SCALING_FILTER_DEFAULT: break; case DRM_SCALING_FILTER_NEAREST_NEIGHBOR: glk_program_nearest_filter_coefs(dev_priv, pipe, id, set); break; default: MISSING_CASE(filter); } } void skl_pfit_enable(const struct intel_crtc_state *crtc_state) { struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); const struct intel_crtc_scaler_state *scaler_state = &crtc_state->scaler_state; const struct drm_rect *dst = &crtc_state->pch_pfit.dst; u16 uv_rgb_hphase, uv_rgb_vphase; enum pipe pipe = crtc->pipe; int width = drm_rect_width(dst); int height = drm_rect_height(dst); int x = dst->x1; int y = dst->y1; int hscale, vscale; struct drm_rect src; int id; u32 ps_ctrl; if (!crtc_state->pch_pfit.enabled) return; if (drm_WARN_ON(&dev_priv->drm, crtc_state->scaler_state.scaler_id < 0)) return; drm_rect_init(&src, 0, 0, drm_rect_width(&crtc_state->pipe_src) << 16, drm_rect_height(&crtc_state->pipe_src) << 16); hscale = drm_rect_calc_hscale(&src, dst, 0, INT_MAX); vscale = drm_rect_calc_vscale(&src, dst, 0, INT_MAX); uv_rgb_hphase = skl_scaler_calc_phase(1, hscale, false); uv_rgb_vphase = skl_scaler_calc_phase(1, vscale, false); id = scaler_state->scaler_id; ps_ctrl = PS_SCALER_EN | PS_BINDING_PIPE | scaler_state->scalers[id].mode | skl_scaler_get_filter_select(crtc_state->hw.scaling_filter, 0); skl_scaler_setup_filter(dev_priv, pipe, id, 0, crtc_state->hw.scaling_filter); intel_de_write_fw(dev_priv, SKL_PS_CTRL(pipe, id), ps_ctrl); intel_de_write_fw(dev_priv, SKL_PS_VPHASE(pipe, id), PS_Y_PHASE(0) | PS_UV_RGB_PHASE(uv_rgb_vphase)); intel_de_write_fw(dev_priv, SKL_PS_HPHASE(pipe, id), PS_Y_PHASE(0) | PS_UV_RGB_PHASE(uv_rgb_hphase)); intel_de_write_fw(dev_priv, SKL_PS_WIN_POS(pipe, id), PS_WIN_XPOS(x) | PS_WIN_YPOS(y)); intel_de_write_fw(dev_priv, SKL_PS_WIN_SZ(pipe, id), PS_WIN_XSIZE(width) | PS_WIN_YSIZE(height)); } void skl_program_plane_scaler(struct intel_plane *plane, const struct intel_crtc_state *crtc_state, const struct intel_plane_state *plane_state) { struct drm_i915_private *dev_priv = to_i915(plane->base.dev); const struct drm_framebuffer *fb = plane_state->hw.fb; enum pipe pipe = plane->pipe; int scaler_id = plane_state->scaler_id; const struct intel_scaler *scaler = &crtc_state->scaler_state.scalers[scaler_id]; int crtc_x = plane_state->uapi.dst.x1; int crtc_y = plane_state->uapi.dst.y1; u32 crtc_w = drm_rect_width(&plane_state->uapi.dst); u32 crtc_h = drm_rect_height(&plane_state->uapi.dst); u16 y_hphase, uv_rgb_hphase; u16 y_vphase, uv_rgb_vphase; int hscale, vscale; u32 ps_ctrl; hscale = drm_rect_calc_hscale(&plane_state->uapi.src, &plane_state->uapi.dst, 0, INT_MAX); vscale = drm_rect_calc_vscale(&plane_state->uapi.src, &plane_state->uapi.dst, 0, INT_MAX); /* TODO: handle sub-pixel coordinates */ if (intel_format_info_is_yuv_semiplanar(fb->format, fb->modifier) && !icl_is_hdr_plane(dev_priv, plane->id)) { y_hphase = skl_scaler_calc_phase(1, hscale, false); y_vphase = skl_scaler_calc_phase(1, vscale, false); /* MPEG2 chroma siting convention */ uv_rgb_hphase = skl_scaler_calc_phase(2, hscale, true); uv_rgb_vphase = skl_scaler_calc_phase(2, vscale, false); } else { /* not used */ y_hphase = 0; y_vphase = 0; uv_rgb_hphase = skl_scaler_calc_phase(1, hscale, false); uv_rgb_vphase = skl_scaler_calc_phase(1, vscale, false); } ps_ctrl = PS_SCALER_EN | PS_BINDING_PLANE(plane->id) | scaler->mode | skl_scaler_get_filter_select(plane_state->hw.scaling_filter, 0); skl_scaler_setup_filter(dev_priv, pipe, scaler_id, 0, plane_state->hw.scaling_filter); intel_de_write_fw(dev_priv, SKL_PS_CTRL(pipe, scaler_id), ps_ctrl); intel_de_write_fw(dev_priv, SKL_PS_VPHASE(pipe, scaler_id), PS_Y_PHASE(y_vphase) | PS_UV_RGB_PHASE(uv_rgb_vphase)); intel_de_write_fw(dev_priv, SKL_PS_HPHASE(pipe, scaler_id), PS_Y_PHASE(y_hphase) | PS_UV_RGB_PHASE(uv_rgb_hphase)); intel_de_write_fw(dev_priv, SKL_PS_WIN_POS(pipe, scaler_id), PS_WIN_XPOS(crtc_x) | PS_WIN_YPOS(crtc_y)); intel_de_write_fw(dev_priv, SKL_PS_WIN_SZ(pipe, scaler_id), PS_WIN_XSIZE(crtc_w) | PS_WIN_YSIZE(crtc_h)); } static void skl_detach_scaler(struct intel_crtc *crtc, int id) { struct drm_device *dev = crtc->base.dev; struct drm_i915_private *dev_priv = to_i915(dev); intel_de_write_fw(dev_priv, SKL_PS_CTRL(crtc->pipe, id), 0); intel_de_write_fw(dev_priv, SKL_PS_WIN_POS(crtc->pipe, id), 0); intel_de_write_fw(dev_priv, SKL_PS_WIN_SZ(crtc->pipe, id), 0); } /* * This function detaches (aka. unbinds) unused scalers in hardware */ void skl_detach_scalers(const struct intel_crtc_state *crtc_state) { struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); const struct intel_crtc_scaler_state *scaler_state = &crtc_state->scaler_state; int i; /* loop through and disable scalers that aren't in use */ for (i = 0; i < crtc->num_scalers; i++) { if (!scaler_state->scalers[i].in_use) skl_detach_scaler(crtc, i); } } void skl_scaler_disable(const struct intel_crtc_state *old_crtc_state) { struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->uapi.crtc); int i; for (i = 0; i < crtc->num_scalers; i++) skl_detach_scaler(crtc, i); } void skl_scaler_get_config(struct intel_crtc_state *crtc_state) { struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); struct intel_crtc_scaler_state *scaler_state = &crtc_state->scaler_state; int id = -1; int i; /* find scaler attached to this pipe */ for (i = 0; i < crtc->num_scalers; i++) { u32 ctl, pos, size; ctl = intel_de_read(dev_priv, SKL_PS_CTRL(crtc->pipe, i)); if ((ctl & (PS_SCALER_EN | PS_BINDING_MASK)) != (PS_SCALER_EN | PS_BINDING_PIPE)) continue; id = i; crtc_state->pch_pfit.enabled = true; pos = intel_de_read(dev_priv, SKL_PS_WIN_POS(crtc->pipe, i)); size = intel_de_read(dev_priv, SKL_PS_WIN_SZ(crtc->pipe, i)); drm_rect_init(&crtc_state->pch_pfit.dst, REG_FIELD_GET(PS_WIN_XPOS_MASK, pos), REG_FIELD_GET(PS_WIN_YPOS_MASK, pos), REG_FIELD_GET(PS_WIN_XSIZE_MASK, size), REG_FIELD_GET(PS_WIN_YSIZE_MASK, size)); scaler_state->scalers[i].in_use = true; break; } scaler_state->scaler_id = id; if (id >= 0) scaler_state->scaler_users |= (1 << SKL_CRTC_INDEX); else scaler_state->scaler_users &= ~(1 << SKL_CRTC_INDEX); }