# SPDX-License-Identifier: GPL-2.0-only menu "IRQ chip support" config IRQCHIP def_bool y depends on (OF_IRQ || ACPI_GENERIC_GSI) config ARM_GIC bool depends on OF select IRQ_DOMAIN_HIERARCHY select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP config ARM_GIC_PM bool depends on PM select ARM_GIC config ARM_GIC_MAX_NR int depends on ARM_GIC default 2 if ARCH_REALVIEW default 1 config ARM_GIC_V2M bool depends on PCI select ARM_GIC select IRQ_MSI_LIB select PCI_MSI config GIC_NON_BANKED bool config ARM_GIC_V3 bool select IRQ_DOMAIN_HIERARCHY select PARTITION_PERCPU select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP select HAVE_ARM_SMCCC_DISCOVERY config ARM_GIC_V3_ITS bool select GENERIC_MSI_IRQ select IRQ_MSI_LIB default ARM_GIC_V3 config ARM_GIC_V3_ITS_FSL_MC bool depends on ARM_GIC_V3_ITS depends on FSL_MC_BUS default ARM_GIC_V3_ITS config ARM_NVIC bool select IRQ_DOMAIN_HIERARCHY select GENERIC_IRQ_CHIP config ARM_VIC bool select IRQ_DOMAIN config ARM_VIC_NR int default 4 if ARCH_S5PV210 default 2 depends on ARM_VIC help The maximum number of VICs available in the system, for power management. config IRQ_MSI_LIB bool config ARMADA_370_XP_IRQ bool select GENERIC_IRQ_CHIP select PCI_MSI if PCI select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP config ALPINE_MSI bool depends on PCI select PCI_MSI select GENERIC_IRQ_CHIP config AL_FIC bool "Amazon's Annapurna Labs Fabric Interrupt Controller" depends on OF depends on HAS_IOMEM select GENERIC_IRQ_CHIP select IRQ_DOMAIN help Support Amazon's Annapurna Labs Fabric Interrupt Controller. config ATMEL_AIC_IRQ bool select GENERIC_IRQ_CHIP select IRQ_DOMAIN select SPARSE_IRQ config ATMEL_AIC5_IRQ bool select GENERIC_IRQ_CHIP select IRQ_DOMAIN select SPARSE_IRQ config I8259 bool select IRQ_DOMAIN config BCM6345_L1_IRQ bool select GENERIC_IRQ_CHIP select IRQ_DOMAIN select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP config BCM7038_L1_IRQ tristate "Broadcom STB 7038-style L1/L2 interrupt controller driver" depends on ARCH_BRCMSTB || BMIPS_GENERIC default ARCH_BRCMSTB || BMIPS_GENERIC select GENERIC_IRQ_CHIP select IRQ_DOMAIN select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP config BCM7120_L2_IRQ tristate "Broadcom STB 7120-style L2 interrupt controller driver" depends on ARCH_BRCMSTB || BMIPS_GENERIC default ARCH_BRCMSTB || BMIPS_GENERIC select GENERIC_IRQ_CHIP select IRQ_DOMAIN config BRCMSTB_L2_IRQ tristate "Broadcom STB generic L2 interrupt controller driver" depends on ARCH_BCM2835 || ARCH_BRCMSTB || BMIPS_GENERIC default ARCH_BCM2835 || ARCH_BRCMSTB || BMIPS_GENERIC select GENERIC_IRQ_CHIP select IRQ_DOMAIN config DAVINCI_CP_INTC bool select GENERIC_IRQ_CHIP select IRQ_DOMAIN config DW_APB_ICTL bool select GENERIC_IRQ_CHIP select IRQ_DOMAIN_HIERARCHY config FARADAY_FTINTC010 bool select IRQ_DOMAIN select SPARSE_IRQ config HISILICON_IRQ_MBIGEN bool select ARM_GIC_V3 select ARM_GIC_V3_ITS config IMGPDC_IRQ bool select GENERIC_IRQ_CHIP select IRQ_DOMAIN config IXP4XX_IRQ bool select IRQ_DOMAIN select SPARSE_IRQ config LAN966X_OIC tristate "Microchip LAN966x OIC Support" select GENERIC_IRQ_CHIP select IRQ_DOMAIN help Enable support for the LAN966x Outbound Interrupt Controller. This controller is present on the Microchip LAN966x PCI device and maps the internal interrupts sources to PCIe interrupt. To compile this driver as a module, choose M here: the module will be called irq-lan966x-oic. config MADERA_IRQ tristate config IRQ_MIPS_CPU bool select GENERIC_IRQ_CHIP select GENERIC_IRQ_IPI if SMP && SYS_SUPPORTS_MULTITHREADING select IRQ_DOMAIN select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP config CLPS711X_IRQCHIP bool depends on ARCH_CLPS711X select IRQ_DOMAIN select SPARSE_IRQ default y config OMPIC bool config OR1K_PIC bool select IRQ_DOMAIN config OMAP_IRQCHIP bool select GENERIC_IRQ_CHIP select IRQ_DOMAIN config ORION_IRQCHIP bool select IRQ_DOMAIN config PIC32_EVIC bool select GENERIC_IRQ_CHIP select IRQ_DOMAIN config JCORE_AIC bool "J-Core integrated AIC" if COMPILE_TEST depends on OF select IRQ_DOMAIN help Support for the J-Core integrated AIC. config RDA_INTC bool select IRQ_DOMAIN config RENESAS_INTC_IRQPIN bool "Renesas INTC External IRQ Pin Support" if COMPILE_TEST select IRQ_DOMAIN help Enable support for the Renesas Interrupt Controller for external interrupt pins, as found on SH/R-Mobile and R-Car Gen1 SoCs. config RENESAS_IRQC bool "Renesas R-Mobile APE6, R-Car Gen{2,3} and RZ/G{1,2} IRQC support" if COMPILE_TEST select GENERIC_IRQ_CHIP select IRQ_DOMAIN help Enable support for the Renesas Interrupt Controller for external devices, as found on R-Mobile APE6, R-Car Gen{2,3} and RZ/G{1,2} SoCs. config RENESAS_RZA1_IRQC bool "Renesas RZ/A1 IRQC support" if COMPILE_TEST select IRQ_DOMAIN_HIERARCHY help Enable support for the Renesas RZ/A1 Interrupt Controller, to use up to 8 external interrupts with configurable sense select. config RENESAS_RZG2L_IRQC bool "Renesas RZ/G2L (and alike SoC) IRQC support" if COMPILE_TEST select GENERIC_IRQ_CHIP select IRQ_DOMAIN_HIERARCHY help Enable support for the Renesas RZ/G2L (and alike SoC) Interrupt Controller for external devices. config RENESAS_RZV2H_ICU bool "Renesas RZ/V2H(P) ICU support" if COMPILE_TEST select GENERIC_IRQ_CHIP select IRQ_DOMAIN_HIERARCHY help Enable support for the Renesas RZ/V2H(P) Interrupt Control Unit (ICU) config SL28CPLD_INTC bool "Kontron sl28cpld IRQ controller" depends on MFD_SL28CPLD=y || COMPILE_TEST select REGMAP_IRQ help Interrupt controller driver for the board management controller found on the Kontron sl28 CPLD. config ST_IRQCHIP bool select REGMAP select MFD_SYSCON help Enables SysCfg Controlled IRQs on STi based platforms. config SUN4I_INTC bool config SUN6I_R_INTC bool select IRQ_DOMAIN_HIERARCHY select IRQ_FASTEOI_HIERARCHY_HANDLERS config SUNXI_NMI_INTC bool select GENERIC_IRQ_CHIP config TB10X_IRQC bool select IRQ_DOMAIN select GENERIC_IRQ_CHIP config TS4800_IRQ tristate "TS-4800 IRQ controller" select IRQ_DOMAIN depends on HAS_IOMEM depends on SOC_IMX51 || COMPILE_TEST help Support for the TS-4800 FPGA IRQ controller config VERSATILE_FPGA_IRQ bool select IRQ_DOMAIN config VERSATILE_FPGA_IRQ_NR int default 4 depends on VERSATILE_FPGA_IRQ config XTENSA_MX bool select IRQ_DOMAIN select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP config XILINX_INTC bool "Xilinx Interrupt Controller IP" depends on OF_ADDRESS select IRQ_DOMAIN help Support for the Xilinx Interrupt Controller IP core. This is used as a primary controller with MicroBlaze and can also be used as a secondary chained controller on other platforms. config IRQ_CROSSBAR bool help Support for a CROSSBAR ip that precedes the main interrupt controller. The primary irqchip invokes the crossbar's callback which inturn allocates a free irq and configures the IP. Thus the peripheral interrupts are routed to one of the free irqchip interrupt lines. config KEYSTONE_IRQ tristate "Keystone 2 IRQ controller IP" depends on ARCH_KEYSTONE help Support for Texas Instruments Keystone 2 IRQ controller IP which is part of the Keystone 2 IPC mechanism config MIPS_GIC bool select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP select GENERIC_IRQ_IPI if SMP select IRQ_DOMAIN_HIERARCHY select MIPS_CM config INGENIC_IRQ bool depends on MACH_INGENIC default y config INGENIC_TCU_IRQ bool "Ingenic JZ47xx TCU interrupt controller" default MACH_INGENIC depends on MIPS || COMPILE_TEST select MFD_SYSCON select GENERIC_IRQ_CHIP help Support for interrupts in the Timer/Counter Unit (TCU) of the Ingenic JZ47xx SoCs. If unsure, say N. config IMX_GPCV2 bool select IRQ_DOMAIN help Enables the wakeup IRQs for IMX platforms with GPCv2 block config IRQ_MXS def_bool y if MACH_ASM9260 || ARCH_MXS select IRQ_DOMAIN select STMP_DEVICE config MSCC_OCELOT_IRQ bool select IRQ_DOMAIN select GENERIC_IRQ_CHIP config MVEBU_GICP select IRQ_MSI_LIB bool config MVEBU_ICU bool config MVEBU_ODMI bool select IRQ_MSI_LIB select GENERIC_MSI_IRQ config MVEBU_PIC bool config MVEBU_SEI bool config LS_EXTIRQ def_bool y if SOC_LS1021A || ARCH_LAYERSCAPE select MFD_SYSCON config LS_SCFG_MSI def_bool y if SOC_LS1021A || ARCH_LAYERSCAPE depends on PCI_MSI config PARTITION_PERCPU bool config STM32MP_EXTI tristate "STM32MP extended interrupts and event controller" depends on (ARCH_STM32 && !ARM_SINGLE_ARMV7M) || COMPILE_TEST default ARCH_STM32 && !ARM_SINGLE_ARMV7M select IRQ_DOMAIN_HIERARCHY select GENERIC_IRQ_CHIP help Support STM32MP EXTI (extended interrupts and event) controller. config STM32_EXTI bool select IRQ_DOMAIN select GENERIC_IRQ_CHIP config QCOM_IRQ_COMBINER bool "QCOM IRQ combiner support" depends on ARCH_QCOM && ACPI select IRQ_DOMAIN_HIERARCHY help Say yes here to add support for the IRQ combiner devices embedded in Qualcomm Technologies chips. config IRQ_UNIPHIER_AIDET bool "UniPhier AIDET support" if COMPILE_TEST depends on ARCH_UNIPHIER || COMPILE_TEST default ARCH_UNIPHIER select IRQ_DOMAIN_HIERARCHY help Support for the UniPhier AIDET (ARM Interrupt Detector). config MESON_IRQ_GPIO tristate "Meson GPIO Interrupt Multiplexer" depends on ARCH_MESON || COMPILE_TEST default ARCH_MESON select IRQ_DOMAIN_HIERARCHY help Support Meson SoC Family GPIO Interrupt Multiplexer config GOLDFISH_PIC bool "Goldfish programmable interrupt controller" depends on MIPS && (GOLDFISH || COMPILE_TEST) select GENERIC_IRQ_CHIP select IRQ_DOMAIN help Say yes here to enable Goldfish interrupt controller driver used for Goldfish based virtual platforms. config QCOM_PDC tristate "QCOM PDC" depends on ARCH_QCOM select IRQ_DOMAIN_HIERARCHY help Power Domain Controller driver to manage and configure wakeup IRQs for Qualcomm Technologies Inc (QTI) mobile chips. config QCOM_MPM tristate "QCOM MPM" depends on ARCH_QCOM depends on MAILBOX select IRQ_DOMAIN_HIERARCHY help MSM Power Manager driver to manage and configure wakeup IRQs for Qualcomm Technologies Inc (QTI) mobile chips. config CSKY_MPINTC bool depends on CSKY help Say yes here to enable C-SKY SMP interrupt controller driver used for C-SKY SMP system. In fact it's not mmio map in hardware and it uses ld/st to visit the controller's register inside CPU. config CSKY_APB_INTC bool "C-SKY APB Interrupt Controller" depends on CSKY help Say yes here to enable C-SKY APB interrupt controller driver used by C-SKY single core SOC system. It uses mmio map apb-bus to visit the controller's register. config IMX_IRQSTEER bool "i.MX IRQSTEER support" depends on ARCH_MXC || COMPILE_TEST default ARCH_MXC select IRQ_DOMAIN help Support for the i.MX IRQSTEER interrupt multiplexer/remapper. config IMX_INTMUX bool "i.MX INTMUX support" if COMPILE_TEST default y if ARCH_MXC select IRQ_DOMAIN help Support for the i.MX INTMUX interrupt multiplexer. config IMX_MU_MSI tristate "i.MX MU used as MSI controller" depends on OF && HAS_IOMEM depends on ARCH_MXC || COMPILE_TEST default m if ARCH_MXC select IRQ_DOMAIN select IRQ_DOMAIN_HIERARCHY select GENERIC_MSI_IRQ select IRQ_MSI_LIB help Provide a driver for the i.MX Messaging Unit block used as a CPU-to-CPU MSI controller. This requires a specially crafted DT to make use of this driver. If unsure, say N config LS1X_IRQ bool "Loongson-1 Interrupt Controller" depends on MACH_LOONGSON32 default y select IRQ_DOMAIN select GENERIC_IRQ_CHIP help Support for the Loongson-1 platform Interrupt Controller. config TI_SCI_INTR_IRQCHIP bool depends on TI_SCI_PROTOCOL select IRQ_DOMAIN_HIERARCHY help This enables the irqchip driver support for K3 Interrupt router over TI System Control Interface available on some new TI's SoCs. If you wish to use interrupt router irq resources managed by the TI System Controller, say Y here. Otherwise, say N. config TI_SCI_INTA_IRQCHIP bool depends on TI_SCI_PROTOCOL select IRQ_DOMAIN_HIERARCHY select TI_SCI_INTA_MSI_DOMAIN help This enables the irqchip driver support for K3 Interrupt aggregator over TI System Control Interface available on some new TI's SoCs. If you wish to use interrupt aggregator irq resources managed by the TI System Controller, say Y here. Otherwise, say N. config TI_PRUSS_INTC tristate depends on TI_PRUSS default TI_PRUSS select IRQ_DOMAIN help This enables support for the PRU-ICSS Local Interrupt Controller present within a PRU-ICSS subsystem present on various TI SoCs. The PRUSS INTC enables various interrupts to be routed to multiple different processors within the SoC. config RISCV_INTC bool depends on RISCV select IRQ_DOMAIN_HIERARCHY config RISCV_APLIC bool depends on RISCV select IRQ_DOMAIN_HIERARCHY config RISCV_APLIC_MSI bool depends on RISCV_APLIC select GENERIC_MSI_IRQ default RISCV_APLIC config RISCV_IMSIC bool depends on RISCV select IRQ_DOMAIN_HIERARCHY select GENERIC_IRQ_MATRIX_ALLOCATOR select GENERIC_MSI_IRQ config RISCV_IMSIC_PCI bool depends on RISCV_IMSIC depends on PCI depends on PCI_MSI default RISCV_IMSIC config SIFIVE_PLIC bool depends on RISCV select IRQ_DOMAIN_HIERARCHY select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP config STARFIVE_JH8100_INTC bool "StarFive JH8100 External Interrupt Controller" depends on ARCH_STARFIVE || COMPILE_TEST default ARCH_STARFIVE select IRQ_DOMAIN_HIERARCHY help This enables support for the INTC chip found in StarFive JH8100 SoC. If you don't know what to do here, say Y. config THEAD_C900_ACLINT_SSWI bool "THEAD C9XX ACLINT S-mode IPI Interrupt Controller" depends on RISCV depends on SMP select IRQ_DOMAIN_HIERARCHY select GENERIC_IRQ_IPI_MUX help This enables support for T-HEAD specific ACLINT SSWI device support. If you don't know what to do here, say Y. config EXYNOS_IRQ_COMBINER bool "Samsung Exynos IRQ combiner support" if COMPILE_TEST depends on (ARCH_EXYNOS && ARM) || COMPILE_TEST help Say yes here to add support for the IRQ combiner devices embedded in Samsung Exynos chips. config IRQ_LOONGARCH_CPU bool select GENERIC_IRQ_CHIP select IRQ_DOMAIN select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP select LOONGSON_HTVEC select LOONGSON_LIOINTC select LOONGSON_EIOINTC select LOONGSON_PCH_PIC select LOONGSON_PCH_MSI select LOONGSON_PCH_LPC help Support for the LoongArch CPU Interrupt Controller. For details of irq chip hierarchy on LoongArch platforms please read the document Documentation/arch/loongarch/irq-chip-model.rst. config LOONGSON_LIOINTC bool "Loongson Local I/O Interrupt Controller" depends on MACH_LOONGSON64 default y select IRQ_DOMAIN select GENERIC_IRQ_CHIP help Support for the Loongson Local I/O Interrupt Controller. config LOONGSON_EIOINTC bool "Loongson Extend I/O Interrupt Controller" depends on LOONGARCH depends on MACH_LOONGSON64 default MACH_LOONGSON64 select IRQ_DOMAIN_HIERARCHY select GENERIC_IRQ_CHIP help Support for the Loongson3 Extend I/O Interrupt Vector Controller. config LOONGSON_HTPIC bool "Loongson3 HyperTransport PIC Controller" depends on MACH_LOONGSON64 && MIPS default y select IRQ_DOMAIN select GENERIC_IRQ_CHIP help Support for the Loongson-3 HyperTransport PIC Controller. config LOONGSON_HTVEC bool "Loongson HyperTransport Interrupt Vector Controller" depends on MACH_LOONGSON64 default MACH_LOONGSON64 select IRQ_DOMAIN_HIERARCHY help Support for the Loongson HyperTransport Interrupt Vector Controller. config LOONGSON_PCH_PIC bool "Loongson PCH PIC Controller" depends on MACH_LOONGSON64 default MACH_LOONGSON64 select IRQ_DOMAIN_HIERARCHY select IRQ_FASTEOI_HIERARCHY_HANDLERS help Support for the Loongson PCH PIC Controller. config LOONGSON_PCH_MSI bool "Loongson PCH MSI Controller" depends on MACH_LOONGSON64 depends on PCI default MACH_LOONGSON64 select IRQ_DOMAIN_HIERARCHY select IRQ_MSI_LIB select PCI_MSI help Support for the Loongson PCH MSI Controller. config LOONGSON_PCH_LPC bool "Loongson PCH LPC Controller" depends on LOONGARCH depends on MACH_LOONGSON64 default MACH_LOONGSON64 select IRQ_DOMAIN_HIERARCHY help Support for the Loongson PCH LPC Controller. config MST_IRQ bool "MStar Interrupt Controller" depends on ARCH_MEDIATEK || ARCH_MSTARV7 || COMPILE_TEST default ARCH_MEDIATEK select IRQ_DOMAIN select IRQ_DOMAIN_HIERARCHY help Support MStar Interrupt Controller. config WPCM450_AIC bool "Nuvoton WPCM450 Advanced Interrupt Controller" depends on ARCH_WPCM450 help Support for the interrupt controller in the Nuvoton WPCM450 BMC SoC. config IRQ_IDT3243X bool select GENERIC_IRQ_CHIP select IRQ_DOMAIN config APPLE_AIC bool "Apple Interrupt Controller (AIC)" depends on ARM64 depends on ARCH_APPLE || COMPILE_TEST select GENERIC_IRQ_IPI_MUX help Support for the Apple Interrupt Controller found on Apple Silicon SoCs, such as the M1. config MCHP_EIC bool "Microchip External Interrupt Controller" depends on ARCH_AT91 || COMPILE_TEST select IRQ_DOMAIN select IRQ_DOMAIN_HIERARCHY help Support for Microchip External Interrupt Controller. config SUNPLUS_SP7021_INTC bool "Sunplus SP7021 interrupt controller" if COMPILE_TEST default SOC_SP7021 help Support for the Sunplus SP7021 Interrupt Controller IP core. SP7021 SoC has 2 Chips: C-Chip & P-Chip. This is used as a chained controller, routing all interrupt source in P-Chip to the primary controller on C-Chip. endmenu