// SPDX-License-Identifier: GPL-2.0 /* * Sony IMX290 CMOS Image Sensor Driver * * Copyright (C) 2019 FRAMOS GmbH. * * Copyright (C) 2019 Linaro Ltd. * Author: Manivannan Sadhasivam */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define IMX290_STANDBY CCI_REG8(0x3000) #define IMX290_REGHOLD CCI_REG8(0x3001) #define IMX290_XMSTA CCI_REG8(0x3002) #define IMX290_ADBIT CCI_REG8(0x3005) #define IMX290_ADBIT_10BIT (0 << 0) #define IMX290_ADBIT_12BIT (1 << 0) #define IMX290_CTRL_07 CCI_REG8(0x3007) #define IMX290_VREVERSE BIT(0) #define IMX290_HREVERSE BIT(1) #define IMX290_WINMODE_1080P (0 << 4) #define IMX290_WINMODE_720P (1 << 4) #define IMX290_WINMODE_CROP (4 << 4) #define IMX290_FR_FDG_SEL CCI_REG8(0x3009) #define IMX290_BLKLEVEL CCI_REG16_LE(0x300a) #define IMX290_GAIN CCI_REG8(0x3014) #define IMX290_VMAX CCI_REG24_LE(0x3018) #define IMX290_VMAX_MAX 0x3ffff #define IMX290_HMAX CCI_REG16_LE(0x301c) #define IMX290_HMAX_MAX 0xffff #define IMX290_SHS1 CCI_REG24_LE(0x3020) #define IMX290_WINWV_OB CCI_REG8(0x303a) #define IMX290_WINPV CCI_REG16_LE(0x303c) #define IMX290_WINWV CCI_REG16_LE(0x303e) #define IMX290_WINPH CCI_REG16_LE(0x3040) #define IMX290_WINWH CCI_REG16_LE(0x3042) #define IMX290_OUT_CTRL CCI_REG8(0x3046) #define IMX290_ODBIT_10BIT (0 << 0) #define IMX290_ODBIT_12BIT (1 << 0) #define IMX290_OPORTSEL_PARALLEL (0x0 << 4) #define IMX290_OPORTSEL_LVDS_2CH (0xd << 4) #define IMX290_OPORTSEL_LVDS_4CH (0xe << 4) #define IMX290_OPORTSEL_LVDS_8CH (0xf << 4) #define IMX290_XSOUTSEL CCI_REG8(0x304b) #define IMX290_XSOUTSEL_XVSOUTSEL_HIGH (0 << 0) #define IMX290_XSOUTSEL_XVSOUTSEL_VSYNC (2 << 0) #define IMX290_XSOUTSEL_XHSOUTSEL_HIGH (0 << 2) #define IMX290_XSOUTSEL_XHSOUTSEL_HSYNC (2 << 2) #define IMX290_INCKSEL1 CCI_REG8(0x305c) #define IMX290_INCKSEL2 CCI_REG8(0x305d) #define IMX290_INCKSEL3 CCI_REG8(0x305e) #define IMX290_INCKSEL4 CCI_REG8(0x305f) #define IMX290_PGCTRL CCI_REG8(0x308c) #define IMX290_ADBIT1 CCI_REG8(0x3129) #define IMX290_ADBIT1_10BIT 0x1d #define IMX290_ADBIT1_12BIT 0x00 #define IMX290_INCKSEL5 CCI_REG8(0x315e) #define IMX290_INCKSEL6 CCI_REG8(0x3164) #define IMX290_ADBIT2 CCI_REG8(0x317c) #define IMX290_ADBIT2_10BIT 0x12 #define IMX290_ADBIT2_12BIT 0x00 #define IMX290_ADBIT3 CCI_REG8(0x31ec) #define IMX290_ADBIT3_10BIT 0x37 #define IMX290_ADBIT3_12BIT 0x0e #define IMX290_REPETITION CCI_REG8(0x3405) #define IMX290_PHY_LANE_NUM CCI_REG8(0x3407) #define IMX290_OPB_SIZE_V CCI_REG8(0x3414) #define IMX290_Y_OUT_SIZE CCI_REG16_LE(0x3418) #define IMX290_CSI_DT_FMT CCI_REG16_LE(0x3441) #define IMX290_CSI_DT_FMT_RAW10 0x0a0a #define IMX290_CSI_DT_FMT_RAW12 0x0c0c #define IMX290_CSI_LANE_MODE CCI_REG8(0x3443) #define IMX290_EXTCK_FREQ CCI_REG16_LE(0x3444) #define IMX290_TCLKPOST CCI_REG16_LE(0x3446) #define IMX290_THSZERO CCI_REG16_LE(0x3448) #define IMX290_THSPREPARE CCI_REG16_LE(0x344a) #define IMX290_TCLKTRAIL CCI_REG16_LE(0x344c) #define IMX290_THSTRAIL CCI_REG16_LE(0x344e) #define IMX290_TCLKZERO CCI_REG16_LE(0x3450) #define IMX290_TCLKPREPARE CCI_REG16_LE(0x3452) #define IMX290_TLPX CCI_REG16_LE(0x3454) #define IMX290_X_OUT_SIZE CCI_REG16_LE(0x3472) #define IMX290_INCKSEL7 CCI_REG8(0x3480) #define IMX290_PGCTRL_REGEN BIT(0) #define IMX290_PGCTRL_THRU BIT(1) #define IMX290_PGCTRL_MODE(n) ((n) << 4) /* Number of lines by which exposure must be less than VMAX */ #define IMX290_EXPOSURE_OFFSET 2 #define IMX290_PIXEL_RATE 148500000 /* * The IMX290 pixel array is organized as follows: * * +------------------------------------+ * | Optical Black | } Vertical effective optical black (10) * +---+------------------------------------+---+ * | | | | } Effective top margin (8) * | | +----------------------------+ | | \ * | | | | | | | * | | | | | | | * | | | | | | | * | | | Recording Pixel Area | | | | Recommended height (1080) * | | | | | | | * | | | | | | | * | | | | | | | * | | +----------------------------+ | | / * | | | | } Effective bottom margin (9) * +---+------------------------------------+---+ * <-> <-> <--------------------------> <-> <-> * \---- Ignored right margin (4) * \-------- Effective right margin (9) * \------------------------- Recommended width (1920) * \----------------------------------------- Effective left margin (8) * \--------------------------------------------- Ignored left margin (4) * * The optical black lines are output over CSI-2 with a separate data type. * * The pixel array is meant to have 1920x1080 usable pixels after image * processing in an ISP. It has 8 (9) extra active pixels usable for color * processing in the ISP on the top and left (bottom and right) sides of the * image. In addition, 4 additional pixels are present on the left and right * sides of the image, documented as "ignored area". * * As far as is understood, all pixels of the pixel array (ignored area, color * processing margins and recording area) can be output by the sensor. */ #define IMX290_PIXEL_ARRAY_WIDTH 1945 #define IMX290_PIXEL_ARRAY_HEIGHT 1097 #define IMX290_PIXEL_ARRAY_MARGIN_LEFT 12 #define IMX290_PIXEL_ARRAY_MARGIN_RIGHT 13 #define IMX290_PIXEL_ARRAY_MARGIN_TOP 8 #define IMX290_PIXEL_ARRAY_MARGIN_BOTTOM 9 #define IMX290_PIXEL_ARRAY_RECORDING_WIDTH 1920 #define IMX290_PIXEL_ARRAY_RECORDING_HEIGHT 1080 /* Equivalent value for 16bpp */ #define IMX290_BLACK_LEVEL_DEFAULT 3840 #define IMX290_NUM_SUPPLIES 3 enum imx290_colour_variant { IMX290_VARIANT_COLOUR, IMX290_VARIANT_MONO, IMX290_VARIANT_MAX }; enum imx290_model { IMX290_MODEL_IMX290LQR, IMX290_MODEL_IMX290LLR, IMX290_MODEL_IMX327LQR, }; struct imx290_model_info { enum imx290_colour_variant colour_variant; const struct cci_reg_sequence *init_regs; size_t init_regs_num; const char *name; }; enum imx290_clk_freq { IMX290_CLK_37_125, IMX290_CLK_74_25, IMX290_NUM_CLK }; /* * Clock configuration for registers INCKSEL1 to INCKSEL6. */ struct imx290_clk_cfg { u8 incksel1; u8 incksel2; u8 incksel3; u8 incksel4; u8 incksel5; u8 incksel6; }; struct imx290_mode { u32 width; u32 height; u32 hmax_min; u32 vmax_min; u8 link_freq_index; u8 ctrl_07; const struct cci_reg_sequence *data; u32 data_size; const struct imx290_clk_cfg *clk_cfg; }; struct imx290_csi_cfg { u16 repetition; u16 tclkpost; u16 thszero; u16 thsprepare; u16 tclktrail; u16 thstrail; u16 tclkzero; u16 tclkprepare; u16 tlpx; }; struct imx290 { struct device *dev; struct clk *xclk; struct regmap *regmap; enum imx290_clk_freq xclk_idx; u8 nlanes; const struct imx290_model_info *model; struct v4l2_subdev sd; struct media_pad pad; const struct imx290_mode *current_mode; struct regulator_bulk_data supplies[IMX290_NUM_SUPPLIES]; struct gpio_desc *rst_gpio; struct v4l2_ctrl_handler ctrls; struct v4l2_ctrl *link_freq; struct v4l2_ctrl *hblank; struct v4l2_ctrl *vblank; struct v4l2_ctrl *exposure; struct { struct v4l2_ctrl *hflip; struct v4l2_ctrl *vflip; }; }; static inline struct imx290 *to_imx290(struct v4l2_subdev *_sd) { return container_of(_sd, struct imx290, sd); } /* ----------------------------------------------------------------------------- * Modes and formats */ static const struct cci_reg_sequence imx290_global_init_settings[] = { { IMX290_WINWV_OB, 12 }, { IMX290_WINPH, 0 }, { IMX290_WINPV, 0 }, { IMX290_WINWH, 1948 }, { IMX290_WINWV, 1097 }, { IMX290_XSOUTSEL, IMX290_XSOUTSEL_XVSOUTSEL_VSYNC | IMX290_XSOUTSEL_XHSOUTSEL_HSYNC }, { CCI_REG8(0x3011), 0x02 }, { CCI_REG8(0x3012), 0x64 }, { CCI_REG8(0x3013), 0x00 }, }; static const struct cci_reg_sequence imx290_global_init_settings_290[] = { { CCI_REG8(0x300f), 0x00 }, { CCI_REG8(0x3010), 0x21 }, { CCI_REG8(0x3016), 0x09 }, { CCI_REG8(0x3070), 0x02 }, { CCI_REG8(0x3071), 0x11 }, { CCI_REG8(0x309b), 0x10 }, { CCI_REG8(0x309c), 0x22 }, { CCI_REG8(0x30a2), 0x02 }, { CCI_REG8(0x30a6), 0x20 }, { CCI_REG8(0x30a8), 0x20 }, { CCI_REG8(0x30aa), 0x20 }, { CCI_REG8(0x30ac), 0x20 }, { CCI_REG8(0x30b0), 0x43 }, { CCI_REG8(0x3119), 0x9e }, { CCI_REG8(0x311c), 0x1e }, { CCI_REG8(0x311e), 0x08 }, { CCI_REG8(0x3128), 0x05 }, { CCI_REG8(0x313d), 0x83 }, { CCI_REG8(0x3150), 0x03 }, { CCI_REG8(0x317e), 0x00 }, { CCI_REG8(0x32b8), 0x50 }, { CCI_REG8(0x32b9), 0x10 }, { CCI_REG8(0x32ba), 0x00 }, { CCI_REG8(0x32bb), 0x04 }, { CCI_REG8(0x32c8), 0x50 }, { CCI_REG8(0x32c9), 0x10 }, { CCI_REG8(0x32ca), 0x00 }, { CCI_REG8(0x32cb), 0x04 }, { CCI_REG8(0x332c), 0xd3 }, { CCI_REG8(0x332d), 0x10 }, { CCI_REG8(0x332e), 0x0d }, { CCI_REG8(0x3358), 0x06 }, { CCI_REG8(0x3359), 0xe1 }, { CCI_REG8(0x335a), 0x11 }, { CCI_REG8(0x3360), 0x1e }, { CCI_REG8(0x3361), 0x61 }, { CCI_REG8(0x3362), 0x10 }, { CCI_REG8(0x33b0), 0x50 }, { CCI_REG8(0x33b2), 0x1a }, { CCI_REG8(0x33b3), 0x04 }, }; #define IMX290_NUM_CLK_REGS 2 static const struct cci_reg_sequence xclk_regs[][IMX290_NUM_CLK_REGS] = { [IMX290_CLK_37_125] = { { IMX290_EXTCK_FREQ, (37125 * 256) / 1000 }, { IMX290_INCKSEL7, 0x49 }, }, [IMX290_CLK_74_25] = { { IMX290_EXTCK_FREQ, (74250 * 256) / 1000 }, { IMX290_INCKSEL7, 0x92 }, }, }; static const struct cci_reg_sequence imx290_global_init_settings_327[] = { { CCI_REG8(0x309e), 0x4A }, { CCI_REG8(0x309f), 0x4A }, { CCI_REG8(0x313b), 0x61 }, }; static const struct cci_reg_sequence imx290_1080p_settings[] = { /* mode settings */ { IMX290_WINWV_OB, 12 }, { IMX290_OPB_SIZE_V, 10 }, { IMX290_X_OUT_SIZE, 1920 }, { IMX290_Y_OUT_SIZE, 1080 }, }; static const struct cci_reg_sequence imx290_720p_settings[] = { /* mode settings */ { IMX290_WINWV_OB, 6 }, { IMX290_OPB_SIZE_V, 4 }, { IMX290_X_OUT_SIZE, 1280 }, { IMX290_Y_OUT_SIZE, 720 }, }; static const struct cci_reg_sequence imx290_10bit_settings[] = { { IMX290_ADBIT, IMX290_ADBIT_10BIT }, { IMX290_OUT_CTRL, IMX290_ODBIT_10BIT }, { IMX290_ADBIT1, IMX290_ADBIT1_10BIT }, { IMX290_ADBIT2, IMX290_ADBIT2_10BIT }, { IMX290_ADBIT3, IMX290_ADBIT3_10BIT }, { IMX290_CSI_DT_FMT, IMX290_CSI_DT_FMT_RAW10 }, }; static const struct cci_reg_sequence imx290_12bit_settings[] = { { IMX290_ADBIT, IMX290_ADBIT_12BIT }, { IMX290_OUT_CTRL, IMX290_ODBIT_12BIT }, { IMX290_ADBIT1, IMX290_ADBIT1_12BIT }, { IMX290_ADBIT2, IMX290_ADBIT2_12BIT }, { IMX290_ADBIT3, IMX290_ADBIT3_12BIT }, { IMX290_CSI_DT_FMT, IMX290_CSI_DT_FMT_RAW12 }, }; static const struct imx290_csi_cfg imx290_csi_222_75mhz = { /* 222.75MHz or 445.5Mbit/s per lane */ .repetition = 0x10, .tclkpost = 87, .thszero = 55, .thsprepare = 31, .tclktrail = 31, .thstrail = 31, .tclkzero = 119, .tclkprepare = 31, .tlpx = 23, }; static const struct imx290_csi_cfg imx290_csi_445_5mhz = { /* 445.5MHz or 891Mbit/s per lane */ .repetition = 0x00, .tclkpost = 119, .thszero = 103, .thsprepare = 71, .tclktrail = 55, .thstrail = 63, .tclkzero = 255, .tclkprepare = 63, .tlpx = 55, }; static const struct imx290_csi_cfg imx290_csi_148_5mhz = { /* 148.5MHz or 297Mbit/s per lane */ .repetition = 0x10, .tclkpost = 79, .thszero = 47, .thsprepare = 23, .tclktrail = 23, .thstrail = 23, .tclkzero = 87, .tclkprepare = 23, .tlpx = 23, }; static const struct imx290_csi_cfg imx290_csi_297mhz = { /* 297MHz or 594Mbit/s per lane */ .repetition = 0x00, .tclkpost = 103, .thszero = 87, .thsprepare = 47, .tclktrail = 39, .thstrail = 47, .tclkzero = 191, .tclkprepare = 47, .tlpx = 39, }; /* supported link frequencies */ #define FREQ_INDEX_1080P 0 #define FREQ_INDEX_720P 1 static const s64 imx290_link_freq_2lanes[] = { [FREQ_INDEX_1080P] = 445500000, [FREQ_INDEX_720P] = 297000000, }; static const s64 imx290_link_freq_4lanes[] = { [FREQ_INDEX_1080P] = 222750000, [FREQ_INDEX_720P] = 148500000, }; /* * In this function and in the similar ones below We rely on imx290_probe() * to ensure that nlanes is either 2 or 4. */ static inline const s64 *imx290_link_freqs_ptr(const struct imx290 *imx290) { if (imx290->nlanes == 2) return imx290_link_freq_2lanes; else return imx290_link_freq_4lanes; } static inline int imx290_link_freqs_num(const struct imx290 *imx290) { if (imx290->nlanes == 2) return ARRAY_SIZE(imx290_link_freq_2lanes); else return ARRAY_SIZE(imx290_link_freq_4lanes); } static const struct imx290_clk_cfg imx290_1080p_clock_config[] = { [IMX290_CLK_37_125] = { /* 37.125MHz clock config */ .incksel1 = 0x18, .incksel2 = 0x03, .incksel3 = 0x20, .incksel4 = 0x01, .incksel5 = 0x1a, .incksel6 = 0x1a, }, [IMX290_CLK_74_25] = { /* 74.25MHz clock config */ .incksel1 = 0x0c, .incksel2 = 0x03, .incksel3 = 0x10, .incksel4 = 0x01, .incksel5 = 0x1b, .incksel6 = 0x1b, }, }; static const struct imx290_clk_cfg imx290_720p_clock_config[] = { [IMX290_CLK_37_125] = { /* 37.125MHz clock config */ .incksel1 = 0x20, .incksel2 = 0x00, .incksel3 = 0x20, .incksel4 = 0x01, .incksel5 = 0x1a, .incksel6 = 0x1a, }, [IMX290_CLK_74_25] = { /* 74.25MHz clock config */ .incksel1 = 0x10, .incksel2 = 0x00, .incksel3 = 0x10, .incksel4 = 0x01, .incksel5 = 0x1b, .incksel6 = 0x1b, }, }; /* Mode configs */ static const struct imx290_mode imx290_modes_2lanes[] = { { .width = 1920, .height = 1080, .hmax_min = 2200, .vmax_min = 1125, .link_freq_index = FREQ_INDEX_1080P, .ctrl_07 = IMX290_WINMODE_1080P, .data = imx290_1080p_settings, .data_size = ARRAY_SIZE(imx290_1080p_settings), .clk_cfg = imx290_1080p_clock_config, }, { .width = 1280, .height = 720, .hmax_min = 3300, .vmax_min = 750, .link_freq_index = FREQ_INDEX_720P, .ctrl_07 = IMX290_WINMODE_720P, .data = imx290_720p_settings, .data_size = ARRAY_SIZE(imx290_720p_settings), .clk_cfg = imx290_720p_clock_config, }, }; static const struct imx290_mode imx290_modes_4lanes[] = { { .width = 1920, .height = 1080, .hmax_min = 2200, .vmax_min = 1125, .link_freq_index = FREQ_INDEX_1080P, .ctrl_07 = IMX290_WINMODE_1080P, .data = imx290_1080p_settings, .data_size = ARRAY_SIZE(imx290_1080p_settings), .clk_cfg = imx290_1080p_clock_config, }, { .width = 1280, .height = 720, .hmax_min = 3300, .vmax_min = 750, .link_freq_index = FREQ_INDEX_720P, .ctrl_07 = IMX290_WINMODE_720P, .data = imx290_720p_settings, .data_size = ARRAY_SIZE(imx290_720p_settings), .clk_cfg = imx290_720p_clock_config, }, }; static inline const struct imx290_mode *imx290_modes_ptr(const struct imx290 *imx290) { if (imx290->nlanes == 2) return imx290_modes_2lanes; else return imx290_modes_4lanes; } static inline int imx290_modes_num(const struct imx290 *imx290) { if (imx290->nlanes == 2) return ARRAY_SIZE(imx290_modes_2lanes); else return ARRAY_SIZE(imx290_modes_4lanes); } struct imx290_format_info { u32 code[IMX290_VARIANT_MAX]; u8 bpp; const struct cci_reg_sequence *regs; unsigned int num_regs; }; static const struct imx290_format_info imx290_formats[] = { { .code = { [IMX290_VARIANT_COLOUR] = MEDIA_BUS_FMT_SRGGB10_1X10, [IMX290_VARIANT_MONO] = MEDIA_BUS_FMT_Y10_1X10 }, .bpp = 10, .regs = imx290_10bit_settings, .num_regs = ARRAY_SIZE(imx290_10bit_settings), }, { .code = { [IMX290_VARIANT_COLOUR] = MEDIA_BUS_FMT_SRGGB12_1X12, [IMX290_VARIANT_MONO] = MEDIA_BUS_FMT_Y12_1X12 }, .bpp = 12, .regs = imx290_12bit_settings, .num_regs = ARRAY_SIZE(imx290_12bit_settings), } }; static const struct imx290_format_info * imx290_format_info(const struct imx290 *imx290, u32 code) { unsigned int i; for (i = 0; i < ARRAY_SIZE(imx290_formats); ++i) { const struct imx290_format_info *info = &imx290_formats[i]; if (info->code[imx290->model->colour_variant] == code) return info; } return NULL; } static int imx290_set_register_array(struct imx290 *imx290, const struct cci_reg_sequence *settings, unsigned int num_settings) { int ret; ret = cci_multi_reg_write(imx290->regmap, settings, num_settings, NULL); if (ret < 0) return ret; /* Provide 10ms settle time */ usleep_range(10000, 11000); return 0; } static int imx290_set_clock(struct imx290 *imx290) { const struct imx290_mode *mode = imx290->current_mode; enum imx290_clk_freq clk_idx = imx290->xclk_idx; const struct imx290_clk_cfg *clk_cfg = &mode->clk_cfg[clk_idx]; int ret; ret = imx290_set_register_array(imx290, xclk_regs[clk_idx], IMX290_NUM_CLK_REGS); cci_write(imx290->regmap, IMX290_INCKSEL1, clk_cfg->incksel1, &ret); cci_write(imx290->regmap, IMX290_INCKSEL2, clk_cfg->incksel2, &ret); cci_write(imx290->regmap, IMX290_INCKSEL3, clk_cfg->incksel3, &ret); cci_write(imx290->regmap, IMX290_INCKSEL4, clk_cfg->incksel4, &ret); cci_write(imx290->regmap, IMX290_INCKSEL5, clk_cfg->incksel5, &ret); cci_write(imx290->regmap, IMX290_INCKSEL6, clk_cfg->incksel6, &ret); return ret; } static int imx290_set_data_lanes(struct imx290 *imx290) { int ret = 0; cci_write(imx290->regmap, IMX290_PHY_LANE_NUM, imx290->nlanes - 1, &ret); cci_write(imx290->regmap, IMX290_CSI_LANE_MODE, imx290->nlanes - 1, &ret); cci_write(imx290->regmap, IMX290_FR_FDG_SEL, 0x01, &ret); return ret; } static int imx290_set_black_level(struct imx290 *imx290, const struct v4l2_mbus_framefmt *format, unsigned int black_level, int *err) { unsigned int bpp = imx290_format_info(imx290, format->code)->bpp; return cci_write(imx290->regmap, IMX290_BLKLEVEL, black_level >> (16 - bpp), err); } static int imx290_set_csi_config(struct imx290 *imx290) { const s64 *link_freqs = imx290_link_freqs_ptr(imx290); const struct imx290_csi_cfg *csi_cfg; int ret = 0; switch (link_freqs[imx290->current_mode->link_freq_index]) { case 445500000: csi_cfg = &imx290_csi_445_5mhz; break; case 297000000: csi_cfg = &imx290_csi_297mhz; break; case 222750000: csi_cfg = &imx290_csi_222_75mhz; break; case 148500000: csi_cfg = &imx290_csi_148_5mhz; break; default: return -EINVAL; } cci_write(imx290->regmap, IMX290_REPETITION, csi_cfg->repetition, &ret); cci_write(imx290->regmap, IMX290_TCLKPOST, csi_cfg->tclkpost, &ret); cci_write(imx290->regmap, IMX290_THSZERO, csi_cfg->thszero, &ret); cci_write(imx290->regmap, IMX290_THSPREPARE, csi_cfg->thsprepare, &ret); cci_write(imx290->regmap, IMX290_TCLKTRAIL, csi_cfg->tclktrail, &ret); cci_write(imx290->regmap, IMX290_THSTRAIL, csi_cfg->thstrail, &ret); cci_write(imx290->regmap, IMX290_TCLKZERO, csi_cfg->tclkzero, &ret); cci_write(imx290->regmap, IMX290_TCLKPREPARE, csi_cfg->tclkprepare, &ret); cci_write(imx290->regmap, IMX290_TLPX, csi_cfg->tlpx, &ret); return ret; } static int imx290_setup_format(struct imx290 *imx290, const struct v4l2_mbus_framefmt *format) { const struct imx290_format_info *info; int ret; info = imx290_format_info(imx290, format->code); ret = imx290_set_register_array(imx290, info->regs, info->num_regs); if (ret < 0) { dev_err(imx290->dev, "Could not set format registers\n"); return ret; } return imx290_set_black_level(imx290, format, IMX290_BLACK_LEVEL_DEFAULT, &ret); } /* ---------------------------------------------------------------------------- * Controls */ static void imx290_exposure_update(struct imx290 *imx290, const struct imx290_mode *mode) { unsigned int exposure_max; exposure_max = imx290->vblank->val + mode->height - IMX290_EXPOSURE_OFFSET; __v4l2_ctrl_modify_range(imx290->exposure, 1, exposure_max, 1, exposure_max); } static int imx290_set_ctrl(struct v4l2_ctrl *ctrl) { struct imx290 *imx290 = container_of(ctrl->handler, struct imx290, ctrls); const struct v4l2_mbus_framefmt *format; struct v4l2_subdev_state *state; int ret = 0, vmax; /* * Return immediately for controls that don't need to be applied to the * device. */ if (ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY) return 0; if (ctrl->id == V4L2_CID_VBLANK) { /* Changing vblank changes the allowed range for exposure. */ imx290_exposure_update(imx290, imx290->current_mode); } /* V4L2 controls values will be applied only when power is already up */ if (!pm_runtime_get_if_in_use(imx290->dev)) return 0; state = v4l2_subdev_get_locked_active_state(&imx290->sd); format = v4l2_subdev_state_get_format(state, 0); switch (ctrl->id) { case V4L2_CID_ANALOGUE_GAIN: ret = cci_write(imx290->regmap, IMX290_GAIN, ctrl->val, NULL); break; case V4L2_CID_VBLANK: ret = cci_write(imx290->regmap, IMX290_VMAX, ctrl->val + imx290->current_mode->height, NULL); /* * Due to the way that exposure is programmed in this sensor in * relation to VMAX, we have to reprogramme it whenever VMAX is * changed. * Update ctrl so that the V4L2_CID_EXPOSURE case can refer to * it. */ ctrl = imx290->exposure; fallthrough; case V4L2_CID_EXPOSURE: vmax = imx290->vblank->val + imx290->current_mode->height; ret = cci_write(imx290->regmap, IMX290_SHS1, vmax - ctrl->val - 1, NULL); break; case V4L2_CID_TEST_PATTERN: if (ctrl->val) { imx290_set_black_level(imx290, format, 0, &ret); usleep_range(10000, 11000); cci_write(imx290->regmap, IMX290_PGCTRL, (u8)(IMX290_PGCTRL_REGEN | IMX290_PGCTRL_THRU | IMX290_PGCTRL_MODE(ctrl->val)), &ret); } else { cci_write(imx290->regmap, IMX290_PGCTRL, 0x00, &ret); usleep_range(10000, 11000); imx290_set_black_level(imx290, format, IMX290_BLACK_LEVEL_DEFAULT, &ret); } break; case V4L2_CID_HBLANK: ret = cci_write(imx290->regmap, IMX290_HMAX, ctrl->val + imx290->current_mode->width, NULL); break; case V4L2_CID_HFLIP: case V4L2_CID_VFLIP: { u32 reg; reg = imx290->current_mode->ctrl_07; if (imx290->hflip->val) reg |= IMX290_HREVERSE; if (imx290->vflip->val) reg |= IMX290_VREVERSE; ret = cci_write(imx290->regmap, IMX290_CTRL_07, reg, NULL); break; } default: ret = -EINVAL; break; } pm_runtime_mark_last_busy(imx290->dev); pm_runtime_put_autosuspend(imx290->dev); return ret; } static const struct v4l2_ctrl_ops imx290_ctrl_ops = { .s_ctrl = imx290_set_ctrl, }; static const char * const imx290_test_pattern_menu[] = { "Disabled", "Sequence Pattern 1", "Horizontal Color-bar Chart", "Vertical Color-bar Chart", "Sequence Pattern 2", "Gradation Pattern 1", "Gradation Pattern 2", "000/555h Toggle Pattern", }; static void imx290_ctrl_update(struct imx290 *imx290, const struct imx290_mode *mode) { unsigned int hblank_min = mode->hmax_min - mode->width; unsigned int hblank_max = IMX290_HMAX_MAX - mode->width; unsigned int vblank_min = mode->vmax_min - mode->height; unsigned int vblank_max = IMX290_VMAX_MAX - mode->height; __v4l2_ctrl_s_ctrl(imx290->link_freq, mode->link_freq_index); __v4l2_ctrl_modify_range(imx290->hblank, hblank_min, hblank_max, 1, hblank_min); __v4l2_ctrl_modify_range(imx290->vblank, vblank_min, vblank_max, 1, vblank_min); } static int imx290_ctrl_init(struct imx290 *imx290) { struct v4l2_fwnode_device_properties props; int ret; ret = v4l2_fwnode_device_parse(imx290->dev, &props); if (ret < 0) return ret; v4l2_ctrl_handler_init(&imx290->ctrls, 11); /* * The sensor has an analog gain and a digital gain, both controlled * through a single gain value, expressed in 0.3dB increments. Values * from 0.0dB (0) to 30.0dB (100) apply analog gain only, higher values * up to 72.0dB (240) add further digital gain. Limit the range to * analog gain only, support for digital gain can be added separately * if needed. * * The IMX327 and IMX462 are largely compatible with the IMX290, but * have an analog gain range of 0.0dB to 29.4dB and 42dB of digital * gain. When support for those sensors gets added to the driver, the * gain control should be adjusted accordingly. */ v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops, V4L2_CID_ANALOGUE_GAIN, 0, 100, 1, 0); /* * Correct range will be determined through imx290_ctrl_update setting * V4L2_CID_VBLANK. */ imx290->exposure = v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops, V4L2_CID_EXPOSURE, 1, 65535, 1, 65535); /* * Set the link frequency, pixel rate, horizontal blanking and vertical * blanking to hardcoded values, they will be updated by * imx290_ctrl_update(). */ imx290->link_freq = v4l2_ctrl_new_int_menu(&imx290->ctrls, &imx290_ctrl_ops, V4L2_CID_LINK_FREQ, imx290_link_freqs_num(imx290) - 1, 0, imx290_link_freqs_ptr(imx290)); if (imx290->link_freq) imx290->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY; v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops, V4L2_CID_PIXEL_RATE, IMX290_PIXEL_RATE, IMX290_PIXEL_RATE, 1, IMX290_PIXEL_RATE); v4l2_ctrl_new_std_menu_items(&imx290->ctrls, &imx290_ctrl_ops, V4L2_CID_TEST_PATTERN, ARRAY_SIZE(imx290_test_pattern_menu) - 1, 0, 0, imx290_test_pattern_menu); /* * Actual range will be set from imx290_ctrl_update later in the probe. */ imx290->hblank = v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops, V4L2_CID_HBLANK, 1, 1, 1, 1); imx290->vblank = v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops, V4L2_CID_VBLANK, 1, 1, 1, 1); imx290->hflip = v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops, V4L2_CID_HFLIP, 0, 1, 1, 0); imx290->vflip = v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops, V4L2_CID_VFLIP, 0, 1, 1, 0); v4l2_ctrl_cluster(2, &imx290->hflip); v4l2_ctrl_new_fwnode_properties(&imx290->ctrls, &imx290_ctrl_ops, &props); imx290->sd.ctrl_handler = &imx290->ctrls; if (imx290->ctrls.error) { ret = imx290->ctrls.error; v4l2_ctrl_handler_free(&imx290->ctrls); return ret; } return 0; } /* ---------------------------------------------------------------------------- * Subdev operations */ /* Start streaming */ static int imx290_start_streaming(struct imx290 *imx290, struct v4l2_subdev_state *state) { const struct v4l2_mbus_framefmt *format; int ret; /* Set init register settings */ ret = imx290_set_register_array(imx290, imx290_global_init_settings, ARRAY_SIZE(imx290_global_init_settings)); if (ret < 0) { dev_err(imx290->dev, "Could not set init registers\n"); return ret; } /* Set mdel specific init register settings */ ret = imx290_set_register_array(imx290, imx290->model->init_regs, imx290->model->init_regs_num); if (ret < 0) { dev_err(imx290->dev, "Could not set model specific init registers\n"); return ret; } /* Set clock parameters based on mode and xclk */ ret = imx290_set_clock(imx290); if (ret < 0) { dev_err(imx290->dev, "Could not set clocks - %d\n", ret); return ret; } /* Set data lane count */ ret = imx290_set_data_lanes(imx290); if (ret < 0) { dev_err(imx290->dev, "Could not set data lanes - %d\n", ret); return ret; } ret = imx290_set_csi_config(imx290); if (ret < 0) { dev_err(imx290->dev, "Could not set csi cfg - %d\n", ret); return ret; } /* Apply the register values related to current frame format */ format = v4l2_subdev_state_get_format(state, 0); ret = imx290_setup_format(imx290, format); if (ret < 0) { dev_err(imx290->dev, "Could not set frame format - %d\n", ret); return ret; } /* Apply default values of current mode */ ret = imx290_set_register_array(imx290, imx290->current_mode->data, imx290->current_mode->data_size); if (ret < 0) { dev_err(imx290->dev, "Could not set current mode - %d\n", ret); return ret; } /* Apply customized values from user */ ret = __v4l2_ctrl_handler_setup(imx290->sd.ctrl_handler); if (ret) { dev_err(imx290->dev, "Could not sync v4l2 controls - %d\n", ret); return ret; } cci_write(imx290->regmap, IMX290_STANDBY, 0x00, &ret); msleep(30); /* Start streaming */ return cci_write(imx290->regmap, IMX290_XMSTA, 0x00, &ret); } /* Stop streaming */ static int imx290_stop_streaming(struct imx290 *imx290) { int ret = 0; cci_write(imx290->regmap, IMX290_STANDBY, 0x01, &ret); msleep(30); return cci_write(imx290->regmap, IMX290_XMSTA, 0x01, &ret); } static int imx290_set_stream(struct v4l2_subdev *sd, int enable) { struct imx290 *imx290 = to_imx290(sd); struct v4l2_subdev_state *state; int ret = 0; state = v4l2_subdev_lock_and_get_active_state(sd); if (enable) { ret = pm_runtime_resume_and_get(imx290->dev); if (ret < 0) goto unlock; ret = imx290_start_streaming(imx290, state); if (ret) { dev_err(imx290->dev, "Start stream failed\n"); pm_runtime_put_sync(imx290->dev); goto unlock; } } else { imx290_stop_streaming(imx290); pm_runtime_mark_last_busy(imx290->dev); pm_runtime_put_autosuspend(imx290->dev); } /* * vflip and hflip should not be changed during streaming as the sensor * will produce an invalid frame. */ __v4l2_ctrl_grab(imx290->vflip, enable); __v4l2_ctrl_grab(imx290->hflip, enable); unlock: v4l2_subdev_unlock_state(state); return ret; } static int imx290_enum_mbus_code(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_mbus_code_enum *code) { const struct imx290 *imx290 = to_imx290(sd); if (code->index >= ARRAY_SIZE(imx290_formats)) return -EINVAL; code->code = imx290_formats[code->index].code[imx290->model->colour_variant]; return 0; } static int imx290_enum_frame_size(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_frame_size_enum *fse) { const struct imx290 *imx290 = to_imx290(sd); const struct imx290_mode *imx290_modes = imx290_modes_ptr(imx290); if (!imx290_format_info(imx290, fse->code)) return -EINVAL; if (fse->index >= imx290_modes_num(imx290)) return -EINVAL; fse->min_width = imx290_modes[fse->index].width; fse->max_width = imx290_modes[fse->index].width; fse->min_height = imx290_modes[fse->index].height; fse->max_height = imx290_modes[fse->index].height; return 0; } static int imx290_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_format *fmt) { struct imx290 *imx290 = to_imx290(sd); const struct imx290_mode *mode; struct v4l2_mbus_framefmt *format; mode = v4l2_find_nearest_size(imx290_modes_ptr(imx290), imx290_modes_num(imx290), width, height, fmt->format.width, fmt->format.height); fmt->format.width = mode->width; fmt->format.height = mode->height; if (!imx290_format_info(imx290, fmt->format.code)) fmt->format.code = imx290_formats[0].code[imx290->model->colour_variant]; fmt->format.field = V4L2_FIELD_NONE; fmt->format.colorspace = V4L2_COLORSPACE_RAW; fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_601; fmt->format.quantization = V4L2_QUANTIZATION_FULL_RANGE; fmt->format.xfer_func = V4L2_XFER_FUNC_NONE; format = v4l2_subdev_state_get_format(sd_state, 0); if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) { imx290->current_mode = mode; imx290_ctrl_update(imx290, mode); imx290_exposure_update(imx290, mode); } *format = fmt->format; return 0; } static int imx290_get_selection(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_selection *sel) { struct imx290 *imx290 = to_imx290(sd); struct v4l2_mbus_framefmt *format; switch (sel->target) { case V4L2_SEL_TGT_CROP: { format = v4l2_subdev_state_get_format(sd_state, 0); /* * The sensor moves the readout by 1 pixel based on flips to * keep the Bayer order the same. */ sel->r.top = IMX290_PIXEL_ARRAY_MARGIN_TOP + (IMX290_PIXEL_ARRAY_RECORDING_HEIGHT - format->height) / 2 + imx290->vflip->val; sel->r.left = IMX290_PIXEL_ARRAY_MARGIN_LEFT + (IMX290_PIXEL_ARRAY_RECORDING_WIDTH - format->width) / 2 + imx290->hflip->val; sel->r.width = format->width; sel->r.height = format->height; return 0; } case V4L2_SEL_TGT_NATIVE_SIZE: case V4L2_SEL_TGT_CROP_BOUNDS: sel->r.top = 0; sel->r.left = 0; sel->r.width = IMX290_PIXEL_ARRAY_WIDTH; sel->r.height = IMX290_PIXEL_ARRAY_HEIGHT; return 0; case V4L2_SEL_TGT_CROP_DEFAULT: sel->r.top = IMX290_PIXEL_ARRAY_MARGIN_TOP; sel->r.left = IMX290_PIXEL_ARRAY_MARGIN_LEFT; sel->r.width = IMX290_PIXEL_ARRAY_RECORDING_WIDTH; sel->r.height = IMX290_PIXEL_ARRAY_RECORDING_HEIGHT; return 0; default: return -EINVAL; } } static int imx290_entity_init_state(struct v4l2_subdev *subdev, struct v4l2_subdev_state *sd_state) { struct v4l2_subdev_format fmt = { .which = V4L2_SUBDEV_FORMAT_TRY, .format = { .width = 1920, .height = 1080, }, }; imx290_set_fmt(subdev, sd_state, &fmt); return 0; } static const struct v4l2_subdev_video_ops imx290_video_ops = { .s_stream = imx290_set_stream, }; static const struct v4l2_subdev_pad_ops imx290_pad_ops = { .enum_mbus_code = imx290_enum_mbus_code, .enum_frame_size = imx290_enum_frame_size, .get_fmt = v4l2_subdev_get_fmt, .set_fmt = imx290_set_fmt, .get_selection = imx290_get_selection, }; static const struct v4l2_subdev_ops imx290_subdev_ops = { .video = &imx290_video_ops, .pad = &imx290_pad_ops, }; static const struct v4l2_subdev_internal_ops imx290_internal_ops = { .init_state = imx290_entity_init_state, }; static const struct media_entity_operations imx290_subdev_entity_ops = { .link_validate = v4l2_subdev_link_validate, }; static int imx290_subdev_init(struct imx290 *imx290) { struct i2c_client *client = to_i2c_client(imx290->dev); struct v4l2_subdev_state *state; int ret; imx290->current_mode = &imx290_modes_ptr(imx290)[0]; /* * After linking the subdev with the imx290 instance, we are allowed to * use the pm_runtime functions. Decrease the PM usage count. The device * will get suspended after the autosuspend delay, turning the power * off. However, the communication happening in imx290_ctrl_update() * will already be prevented even before the delay. */ v4l2_i2c_subdev_init(&imx290->sd, client, &imx290_subdev_ops); imx290->sd.dev = imx290->dev; pm_runtime_mark_last_busy(imx290->dev); pm_runtime_put_autosuspend(imx290->dev); imx290->sd.internal_ops = &imx290_internal_ops; imx290->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; imx290->sd.entity.ops = &imx290_subdev_entity_ops; imx290->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; imx290->pad.flags = MEDIA_PAD_FL_SOURCE; ret = media_entity_pads_init(&imx290->sd.entity, 1, &imx290->pad); if (ret < 0) { dev_err(imx290->dev, "Could not register media entity\n"); return ret; } ret = imx290_ctrl_init(imx290); if (ret < 0) { dev_err(imx290->dev, "Control initialization error %d\n", ret); goto err_media; } imx290->sd.state_lock = imx290->ctrls.lock; ret = v4l2_subdev_init_finalize(&imx290->sd); if (ret < 0) { dev_err(imx290->dev, "subdev initialization error %d\n", ret); goto err_ctrls; } state = v4l2_subdev_lock_and_get_active_state(&imx290->sd); imx290_ctrl_update(imx290, imx290->current_mode); v4l2_subdev_unlock_state(state); return 0; err_ctrls: v4l2_ctrl_handler_free(&imx290->ctrls); err_media: media_entity_cleanup(&imx290->sd.entity); return ret; } static void imx290_subdev_cleanup(struct imx290 *imx290) { v4l2_subdev_cleanup(&imx290->sd); media_entity_cleanup(&imx290->sd.entity); v4l2_ctrl_handler_free(&imx290->ctrls); } /* ---------------------------------------------------------------------------- * Power management */ static int imx290_power_on(struct imx290 *imx290) { int ret; ret = clk_prepare_enable(imx290->xclk); if (ret) { dev_err(imx290->dev, "Failed to enable clock\n"); return ret; } ret = regulator_bulk_enable(ARRAY_SIZE(imx290->supplies), imx290->supplies); if (ret) { dev_err(imx290->dev, "Failed to enable regulators\n"); clk_disable_unprepare(imx290->xclk); return ret; } usleep_range(1, 2); gpiod_set_value_cansleep(imx290->rst_gpio, 0); usleep_range(30000, 31000); return 0; } static void imx290_power_off(struct imx290 *imx290) { clk_disable_unprepare(imx290->xclk); gpiod_set_value_cansleep(imx290->rst_gpio, 1); regulator_bulk_disable(ARRAY_SIZE(imx290->supplies), imx290->supplies); } static int imx290_runtime_resume(struct device *dev) { struct v4l2_subdev *sd = dev_get_drvdata(dev); struct imx290 *imx290 = to_imx290(sd); return imx290_power_on(imx290); } static int imx290_runtime_suspend(struct device *dev) { struct v4l2_subdev *sd = dev_get_drvdata(dev); struct imx290 *imx290 = to_imx290(sd); imx290_power_off(imx290); return 0; } static const struct dev_pm_ops imx290_pm_ops = { RUNTIME_PM_OPS(imx290_runtime_suspend, imx290_runtime_resume, NULL) }; /* ---------------------------------------------------------------------------- * Probe & remove */ static const char * const imx290_supply_name[IMX290_NUM_SUPPLIES] = { "vdda", "vddd", "vdddo", }; static int imx290_get_regulators(struct device *dev, struct imx290 *imx290) { unsigned int i; for (i = 0; i < ARRAY_SIZE(imx290->supplies); i++) imx290->supplies[i].supply = imx290_supply_name[i]; return devm_regulator_bulk_get(dev, ARRAY_SIZE(imx290->supplies), imx290->supplies); } static int imx290_init_clk(struct imx290 *imx290) { u32 xclk_freq; int ret; ret = device_property_read_u32(imx290->dev, "clock-frequency", &xclk_freq); if (ret) { dev_err(imx290->dev, "Could not get xclk frequency\n"); return ret; } /* external clock must be 37.125 MHz or 74.25MHz */ switch (xclk_freq) { case 37125000: imx290->xclk_idx = IMX290_CLK_37_125; break; case 74250000: imx290->xclk_idx = IMX290_CLK_74_25; break; default: dev_err(imx290->dev, "External clock frequency %u is not supported\n", xclk_freq); return -EINVAL; } ret = clk_set_rate(imx290->xclk, xclk_freq); if (ret) { dev_err(imx290->dev, "Could not set xclk frequency\n"); return ret; } return 0; } /* * Returns 0 if all link frequencies used by the driver for the given number * of MIPI data lanes are mentioned in the device tree, or the value of the * first missing frequency otherwise. */ static s64 imx290_check_link_freqs(const struct imx290 *imx290, const struct v4l2_fwnode_endpoint *ep) { int i, j; const s64 *freqs = imx290_link_freqs_ptr(imx290); int freqs_count = imx290_link_freqs_num(imx290); for (i = 0; i < freqs_count; i++) { for (j = 0; j < ep->nr_of_link_frequencies; j++) if (freqs[i] == ep->link_frequencies[j]) break; if (j == ep->nr_of_link_frequencies) return freqs[i]; } return 0; } static const struct imx290_model_info imx290_models[] = { [IMX290_MODEL_IMX290LQR] = { .colour_variant = IMX290_VARIANT_COLOUR, .init_regs = imx290_global_init_settings_290, .init_regs_num = ARRAY_SIZE(imx290_global_init_settings_290), .name = "imx290", }, [IMX290_MODEL_IMX290LLR] = { .colour_variant = IMX290_VARIANT_MONO, .init_regs = imx290_global_init_settings_290, .init_regs_num = ARRAY_SIZE(imx290_global_init_settings_290), .name = "imx290", }, [IMX290_MODEL_IMX327LQR] = { .colour_variant = IMX290_VARIANT_COLOUR, .init_regs = imx290_global_init_settings_327, .init_regs_num = ARRAY_SIZE(imx290_global_init_settings_327), .name = "imx327", }, }; static int imx290_parse_dt(struct imx290 *imx290) { /* Only CSI2 is supported for now: */ struct v4l2_fwnode_endpoint ep = { .bus_type = V4L2_MBUS_CSI2_DPHY }; struct fwnode_handle *endpoint; int ret; s64 fq; imx290->model = of_device_get_match_data(imx290->dev); endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(imx290->dev), NULL); if (!endpoint) { dev_err(imx290->dev, "Endpoint node not found\n"); return -EINVAL; } ret = v4l2_fwnode_endpoint_alloc_parse(endpoint, &ep); fwnode_handle_put(endpoint); if (ret == -ENXIO) { dev_err(imx290->dev, "Unsupported bus type, should be CSI2\n"); goto done; } else if (ret) { dev_err(imx290->dev, "Parsing endpoint node failed\n"); goto done; } /* Get number of data lanes */ imx290->nlanes = ep.bus.mipi_csi2.num_data_lanes; if (imx290->nlanes != 2 && imx290->nlanes != 4) { dev_err(imx290->dev, "Invalid data lanes: %d\n", imx290->nlanes); ret = -EINVAL; goto done; } dev_dbg(imx290->dev, "Using %u data lanes\n", imx290->nlanes); if (!ep.nr_of_link_frequencies) { dev_err(imx290->dev, "link-frequency property not found in DT\n"); ret = -EINVAL; goto done; } /* Check that link frequences for all the modes are in device tree */ fq = imx290_check_link_freqs(imx290, &ep); if (fq) { dev_err(imx290->dev, "Link frequency of %lld is not supported\n", fq); ret = -EINVAL; goto done; } ret = 0; done: v4l2_fwnode_endpoint_free(&ep); return ret; } static int imx290_probe(struct i2c_client *client) { struct device *dev = &client->dev; struct imx290 *imx290; int ret; imx290 = devm_kzalloc(dev, sizeof(*imx290), GFP_KERNEL); if (!imx290) return -ENOMEM; imx290->dev = dev; imx290->regmap = devm_cci_regmap_init_i2c(client, 16); if (IS_ERR(imx290->regmap)) { dev_err(dev, "Unable to initialize I2C\n"); return -ENODEV; } ret = imx290_parse_dt(imx290); if (ret) return ret; /* Acquire resources. */ imx290->xclk = devm_clk_get(dev, "xclk"); if (IS_ERR(imx290->xclk)) return dev_err_probe(dev, PTR_ERR(imx290->xclk), "Could not get xclk\n"); ret = imx290_get_regulators(dev, imx290); if (ret < 0) return dev_err_probe(dev, ret, "Cannot get regulators\n"); imx290->rst_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); if (IS_ERR(imx290->rst_gpio)) return dev_err_probe(dev, PTR_ERR(imx290->rst_gpio), "Cannot get reset gpio\n"); /* Initialize external clock frequency. */ ret = imx290_init_clk(imx290); if (ret) return ret; /* * Enable power management. The driver supports runtime PM, but needs to * work when runtime PM is disabled in the kernel. To that end, power * the sensor on manually here. */ ret = imx290_power_on(imx290); if (ret < 0) { dev_err(dev, "Could not power on the device\n"); return ret; } /* * Enable runtime PM with autosuspend. As the device has been powered * manually, mark it as active, and increase the usage count without * resuming the device. */ pm_runtime_set_active(dev); pm_runtime_get_noresume(dev); pm_runtime_enable(dev); pm_runtime_set_autosuspend_delay(dev, 1000); pm_runtime_use_autosuspend(dev); /* * Make sure the sensor is available, in STANDBY and not streaming * before the V4L2 subdev is initialized. */ ret = imx290_stop_streaming(imx290); if (ret) { ret = dev_err_probe(dev, ret, "Could not initialize device\n"); goto err_pm; } /* Initialize the V4L2 subdev. */ ret = imx290_subdev_init(imx290); if (ret) goto err_pm; v4l2_i2c_subdev_set_name(&imx290->sd, client, imx290->model->name, NULL); /* * Finally, register the V4L2 subdev. This must be done after * initializing everything as the subdev can be used immediately after * being registered. */ ret = v4l2_async_register_subdev(&imx290->sd); if (ret < 0) { dev_err(dev, "Could not register v4l2 device\n"); goto err_subdev; } return 0; err_subdev: imx290_subdev_cleanup(imx290); err_pm: pm_runtime_disable(dev); pm_runtime_put_noidle(dev); imx290_power_off(imx290); return ret; } static void imx290_remove(struct i2c_client *client) { struct v4l2_subdev *sd = i2c_get_clientdata(client); struct imx290 *imx290 = to_imx290(sd); v4l2_async_unregister_subdev(sd); imx290_subdev_cleanup(imx290); /* * Disable runtime PM. In case runtime PM is disabled in the kernel, * make sure to turn power off manually. */ pm_runtime_disable(imx290->dev); if (!pm_runtime_status_suspended(imx290->dev)) imx290_power_off(imx290); pm_runtime_set_suspended(imx290->dev); } static const struct of_device_id imx290_of_match[] = { { /* Deprecated - synonym for "sony,imx290lqr" */ .compatible = "sony,imx290", .data = &imx290_models[IMX290_MODEL_IMX290LQR], }, { .compatible = "sony,imx290lqr", .data = &imx290_models[IMX290_MODEL_IMX290LQR], }, { .compatible = "sony,imx290llr", .data = &imx290_models[IMX290_MODEL_IMX290LLR], }, { .compatible = "sony,imx327lqr", .data = &imx290_models[IMX290_MODEL_IMX327LQR], }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, imx290_of_match); static struct i2c_driver imx290_i2c_driver = { .probe = imx290_probe, .remove = imx290_remove, .driver = { .name = "imx290", .pm = pm_ptr(&imx290_pm_ops), .of_match_table = imx290_of_match, }, }; module_i2c_driver(imx290_i2c_driver); MODULE_DESCRIPTION("Sony IMX290 CMOS Image Sensor Driver"); MODULE_AUTHOR("FRAMOS GmbH"); MODULE_AUTHOR("Manivannan Sadhasivam "); MODULE_LICENSE("GPL v2");