// SPDX-License-Identifier: GPL-2.0 /* * mt9t112 Camera Driver * * Copyright (C) 2018 Jacopo Mondi * * Copyright (C) 2009 Renesas Solutions Corp. * Kuninori Morimoto * * Based on ov772x driver, mt9m111 driver, * * Copyright (C) 2008 Kuninori Morimoto * Copyright (C) 2008, Robert Jarzmik * Copyright 2006-7 Jonathan Corbet * Copyright (C) 2008 Magnus Damm * Copyright (C) 2008, Guennadi Liakhovetski * * TODO: This driver lacks support for frame rate control due to missing * register level documentation and suitable hardware for testing. * v4l-utils compliance tools will report errors. */ #include #include #include #include #include #include #include #include #include #include #include #include #include /* you can check PLL/clock info */ /* #define EXT_CLOCK 24000000 */ /************************************************************************ * macro ***********************************************************************/ /* * frame size */ #define MAX_WIDTH 2048 #define MAX_HEIGHT 1536 /* * macro of read/write */ #define ECHECKER(ret, x) \ do { \ (ret) = (x); \ if ((ret) < 0) \ return (ret); \ } while (0) #define mt9t112_reg_write(ret, client, a, b) \ ECHECKER(ret, __mt9t112_reg_write(client, a, b)) #define mt9t112_mcu_write(ret, client, a, b) \ ECHECKER(ret, __mt9t112_mcu_write(client, a, b)) #define mt9t112_reg_mask_set(ret, client, a, b, c) \ ECHECKER(ret, __mt9t112_reg_mask_set(client, a, b, c)) #define mt9t112_mcu_mask_set(ret, client, a, b, c) \ ECHECKER(ret, __mt9t112_mcu_mask_set(client, a, b, c)) #define mt9t112_reg_read(ret, client, a) \ ECHECKER(ret, __mt9t112_reg_read(client, a)) /* * Logical address */ #define _VAR(id, offset, base) (base | (id & 0x1f) << 10 | (offset & 0x3ff)) #define VAR(id, offset) _VAR(id, offset, 0x0000) #define VAR8(id, offset) _VAR(id, offset, 0x8000) /************************************************************************ * struct ***********************************************************************/ struct mt9t112_format { u32 code; enum v4l2_colorspace colorspace; u16 fmt; u16 order; }; struct mt9t112_priv { struct v4l2_subdev subdev; struct mt9t112_platform_data *info; struct i2c_client *client; struct v4l2_rect frame; struct clk *clk; struct gpio_desc *standby_gpio; const struct mt9t112_format *format; int num_formats; bool init_done; }; /************************************************************************ * supported format ***********************************************************************/ static const struct mt9t112_format mt9t112_cfmts[] = { { .code = MEDIA_BUS_FMT_UYVY8_2X8, .colorspace = V4L2_COLORSPACE_SRGB, .fmt = 1, .order = 0, }, { .code = MEDIA_BUS_FMT_VYUY8_2X8, .colorspace = V4L2_COLORSPACE_SRGB, .fmt = 1, .order = 1, }, { .code = MEDIA_BUS_FMT_YUYV8_2X8, .colorspace = V4L2_COLORSPACE_SRGB, .fmt = 1, .order = 2, }, { .code = MEDIA_BUS_FMT_YVYU8_2X8, .colorspace = V4L2_COLORSPACE_SRGB, .fmt = 1, .order = 3, }, { .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE, .colorspace = V4L2_COLORSPACE_SRGB, .fmt = 8, .order = 2, }, { .code = MEDIA_BUS_FMT_RGB565_2X8_LE, .colorspace = V4L2_COLORSPACE_SRGB, .fmt = 4, .order = 2, }, }; /************************************************************************ * general function ***********************************************************************/ static struct mt9t112_priv *to_mt9t112(const struct i2c_client *client) { return container_of(i2c_get_clientdata(client), struct mt9t112_priv, subdev); } static int __mt9t112_reg_read(const struct i2c_client *client, u16 command) { struct i2c_msg msg[2]; u8 buf[2]; int ret; command = swab16(command); msg[0].addr = client->addr; msg[0].flags = 0; msg[0].len = 2; msg[0].buf = (u8 *)&command; msg[1].addr = client->addr; msg[1].flags = I2C_M_RD; msg[1].len = 2; msg[1].buf = buf; /* * If return value of this function is < 0, it means error, else, * below 16bit is valid data. */ ret = i2c_transfer(client->adapter, msg, 2); if (ret < 0) return ret; memcpy(&ret, buf, 2); return swab16(ret); } static int __mt9t112_reg_write(const struct i2c_client *client, u16 command, u16 data) { struct i2c_msg msg; u8 buf[4]; int ret; command = swab16(command); data = swab16(data); memcpy(buf + 0, &command, 2); memcpy(buf + 2, &data, 2); msg.addr = client->addr; msg.flags = 0; msg.len = 4; msg.buf = buf; /* * i2c_transfer return message length, but this function should * return 0 if correct case. */ ret = i2c_transfer(client->adapter, &msg, 1); return ret >= 0 ? 0 : ret; } static int __mt9t112_reg_mask_set(const struct i2c_client *client, u16 command, u16 mask, u16 set) { int val = __mt9t112_reg_read(client, command); if (val < 0) return val; val &= ~mask; val |= set & mask; return __mt9t112_reg_write(client, command, val); } /* mcu access */ static int __mt9t112_mcu_read(const struct i2c_client *client, u16 command) { int ret; ret = __mt9t112_reg_write(client, 0x098E, command); if (ret < 0) return ret; return __mt9t112_reg_read(client, 0x0990); } static int __mt9t112_mcu_write(const struct i2c_client *client, u16 command, u16 data) { int ret; ret = __mt9t112_reg_write(client, 0x098E, command); if (ret < 0) return ret; return __mt9t112_reg_write(client, 0x0990, data); } static int __mt9t112_mcu_mask_set(const struct i2c_client *client, u16 command, u16 mask, u16 set) { int val = __mt9t112_mcu_read(client, command); if (val < 0) return val; val &= ~mask; val |= set & mask; return __mt9t112_mcu_write(client, command, val); } static int mt9t112_reset(const struct i2c_client *client) { int ret; mt9t112_reg_mask_set(ret, client, 0x001a, 0x0001, 0x0001); usleep_range(1000, 5000); mt9t112_reg_mask_set(ret, client, 0x001a, 0x0001, 0x0000); return ret; } #ifndef EXT_CLOCK #define CLOCK_INFO(a, b) #else #define CLOCK_INFO(a, b) mt9t112_clock_info(a, b) static int mt9t112_clock_info(const struct i2c_client *client, u32 ext) { int m, n, p1, p2, p3, p4, p5, p6, p7; u32 vco, clk; char *enable; ext /= 1000; /* kbyte order */ mt9t112_reg_read(n, client, 0x0012); p1 = n & 0x000f; n = n >> 4; p2 = n & 0x000f; n = n >> 4; p3 = n & 0x000f; mt9t112_reg_read(n, client, 0x002a); p4 = n & 0x000f; n = n >> 4; p5 = n & 0x000f; n = n >> 4; p6 = n & 0x000f; mt9t112_reg_read(n, client, 0x002c); p7 = n & 0x000f; mt9t112_reg_read(n, client, 0x0010); m = n & 0x00ff; n = (n >> 8) & 0x003f; enable = ((ext < 6000) || (ext > 54000)) ? "X" : ""; dev_dbg(&client->dev, "EXTCLK : %10u K %s\n", ext, enable); vco = 2 * m * ext / (n + 1); enable = ((vco < 384000) || (vco > 768000)) ? "X" : ""; dev_dbg(&client->dev, "VCO : %10u K %s\n", vco, enable); clk = vco / (p1 + 1) / (p2 + 1); enable = (clk > 96000) ? "X" : ""; dev_dbg(&client->dev, "PIXCLK : %10u K %s\n", clk, enable); clk = vco / (p3 + 1); enable = (clk > 768000) ? "X" : ""; dev_dbg(&client->dev, "MIPICLK : %10u K %s\n", clk, enable); clk = vco / (p6 + 1); enable = (clk > 96000) ? "X" : ""; dev_dbg(&client->dev, "MCU CLK : %10u K %s\n", clk, enable); clk = vco / (p5 + 1); enable = (clk > 54000) ? "X" : ""; dev_dbg(&client->dev, "SOC CLK : %10u K %s\n", clk, enable); clk = vco / (p4 + 1); enable = (clk > 70000) ? "X" : ""; dev_dbg(&client->dev, "Sensor CLK : %10u K %s\n", clk, enable); clk = vco / (p7 + 1); dev_dbg(&client->dev, "External sensor : %10u K\n", clk); clk = ext / (n + 1); enable = ((clk < 2000) || (clk > 24000)) ? "X" : ""; dev_dbg(&client->dev, "PFD : %10u K %s\n", clk, enable); return 0; } #endif static int mt9t112_set_a_frame_size(const struct i2c_client *client, u16 width, u16 height) { int ret; u16 wstart = (MAX_WIDTH - width) / 2; u16 hstart = (MAX_HEIGHT - height) / 2; /* (Context A) Image Width/Height. */ mt9t112_mcu_write(ret, client, VAR(26, 0), width); mt9t112_mcu_write(ret, client, VAR(26, 2), height); /* (Context A) Output Width/Height. */ mt9t112_mcu_write(ret, client, VAR(18, 43), 8 + width); mt9t112_mcu_write(ret, client, VAR(18, 45), 8 + height); /* (Context A) Start Row/Column. */ mt9t112_mcu_write(ret, client, VAR(18, 2), 4 + hstart); mt9t112_mcu_write(ret, client, VAR(18, 4), 4 + wstart); /* (Context A) End Row/Column. */ mt9t112_mcu_write(ret, client, VAR(18, 6), 11 + height + hstart); mt9t112_mcu_write(ret, client, VAR(18, 8), 11 + width + wstart); mt9t112_mcu_write(ret, client, VAR8(1, 0), 0x06); return ret; } static int mt9t112_set_pll_dividers(const struct i2c_client *client, u8 m, u8 n, u8 p1, u8 p2, u8 p3, u8 p4, u8 p5, u8 p6, u8 p7) { int ret; u16 val; /* N/M */ val = (n << 8) | (m << 0); mt9t112_reg_mask_set(ret, client, 0x0010, 0x3fff, val); /* P1/P2/P3 */ val = ((p3 & 0x0F) << 8) | ((p2 & 0x0F) << 4) | ((p1 & 0x0F) << 0); mt9t112_reg_mask_set(ret, client, 0x0012, 0x0fff, val); /* P4/P5/P6 */ val = (0x7 << 12) | ((p6 & 0x0F) << 8) | ((p5 & 0x0F) << 4) | ((p4 & 0x0F) << 0); mt9t112_reg_mask_set(ret, client, 0x002A, 0x7fff, val); /* P7 */ val = (0x1 << 12) | ((p7 & 0x0F) << 0); mt9t112_reg_mask_set(ret, client, 0x002C, 0x100f, val); return ret; } static int mt9t112_init_pll(const struct i2c_client *client) { struct mt9t112_priv *priv = to_mt9t112(client); int data, i, ret; mt9t112_reg_mask_set(ret, client, 0x0014, 0x003, 0x0001); /* PLL control: BYPASS PLL = 8517. */ mt9t112_reg_write(ret, client, 0x0014, 0x2145); /* Replace these registers when new timing parameters are generated. */ mt9t112_set_pll_dividers(client, priv->info->divider.m, priv->info->divider.n, priv->info->divider.p1, priv->info->divider.p2, priv->info->divider.p3, priv->info->divider.p4, priv->info->divider.p5, priv->info->divider.p6, priv->info->divider.p7); /* * TEST_BYPASS on * PLL_ENABLE on * SEL_LOCK_DET on * TEST_BYPASS off */ mt9t112_reg_write(ret, client, 0x0014, 0x2525); mt9t112_reg_write(ret, client, 0x0014, 0x2527); mt9t112_reg_write(ret, client, 0x0014, 0x3427); mt9t112_reg_write(ret, client, 0x0014, 0x3027); mdelay(10); /* * PLL_BYPASS off * Reference clock count * I2C Master Clock Divider */ mt9t112_reg_write(ret, client, 0x0014, 0x3046); /* JPEG initialization workaround */ mt9t112_reg_write(ret, client, 0x0016, 0x0400); mt9t112_reg_write(ret, client, 0x0022, 0x0190); mt9t112_reg_write(ret, client, 0x3B84, 0x0212); /* External sensor clock is PLL bypass. */ mt9t112_reg_write(ret, client, 0x002E, 0x0500); mt9t112_reg_mask_set(ret, client, 0x0018, 0x0002, 0x0002); mt9t112_reg_mask_set(ret, client, 0x3B82, 0x0004, 0x0004); /* MCU disabled. */ mt9t112_reg_mask_set(ret, client, 0x0018, 0x0004, 0x0004); /* Out of standby. */ mt9t112_reg_mask_set(ret, client, 0x0018, 0x0001, 0); mdelay(50); /* * Standby Workaround * Disable Secondary I2C Pads */ mt9t112_reg_write(ret, client, 0x0614, 0x0001); mdelay(1); mt9t112_reg_write(ret, client, 0x0614, 0x0001); mdelay(1); mt9t112_reg_write(ret, client, 0x0614, 0x0001); mdelay(1); mt9t112_reg_write(ret, client, 0x0614, 0x0001); mdelay(1); mt9t112_reg_write(ret, client, 0x0614, 0x0001); mdelay(1); mt9t112_reg_write(ret, client, 0x0614, 0x0001); mdelay(1); /* Poll to verify out of standby. Must Poll this bit. */ for (i = 0; i < 100; i++) { mt9t112_reg_read(data, client, 0x0018); if (!(data & 0x4000)) break; mdelay(10); } return ret; } static int mt9t112_init_setting(const struct i2c_client *client) { int ret; /* Adaptive Output Clock (A) */ mt9t112_mcu_mask_set(ret, client, VAR(26, 160), 0x0040, 0x0000); /* Read Mode (A) */ mt9t112_mcu_write(ret, client, VAR(18, 12), 0x0024); /* Fine Correction (A) */ mt9t112_mcu_write(ret, client, VAR(18, 15), 0x00CC); /* Fine IT Min (A) */ mt9t112_mcu_write(ret, client, VAR(18, 17), 0x01f1); /* Fine IT Max Margin (A) */ mt9t112_mcu_write(ret, client, VAR(18, 19), 0x00fF); /* Base Frame Lines (A) */ mt9t112_mcu_write(ret, client, VAR(18, 29), 0x032D); /* Min Line Length (A) */ mt9t112_mcu_write(ret, client, VAR(18, 31), 0x073a); /* Line Length (A) */ mt9t112_mcu_write(ret, client, VAR(18, 37), 0x07d0); /* Adaptive Output Clock (B) */ mt9t112_mcu_mask_set(ret, client, VAR(27, 160), 0x0040, 0x0000); /* Row Start (B) */ mt9t112_mcu_write(ret, client, VAR(18, 74), 0x004); /* Column Start (B) */ mt9t112_mcu_write(ret, client, VAR(18, 76), 0x004); /* Row End (B) */ mt9t112_mcu_write(ret, client, VAR(18, 78), 0x60B); /* Column End (B) */ mt9t112_mcu_write(ret, client, VAR(18, 80), 0x80B); /* Fine Correction (B) */ mt9t112_mcu_write(ret, client, VAR(18, 87), 0x008C); /* Fine IT Min (B) */ mt9t112_mcu_write(ret, client, VAR(18, 89), 0x01F1); /* Fine IT Max Margin (B) */ mt9t112_mcu_write(ret, client, VAR(18, 91), 0x00FF); /* Base Frame Lines (B) */ mt9t112_mcu_write(ret, client, VAR(18, 101), 0x0668); /* Min Line Length (B) */ mt9t112_mcu_write(ret, client, VAR(18, 103), 0x0AF0); /* Line Length (B) */ mt9t112_mcu_write(ret, client, VAR(18, 109), 0x0AF0); /* * Flicker Detection registers. * This section should be replaced whenever new timing file is * generated. All the following registers need to be replaced. * Following registers are generated from Register Wizard but user can * modify them. For detail see auto flicker detection tuning. */ /* FD_FDPERIOD_SELECT */ mt9t112_mcu_write(ret, client, VAR8(8, 5), 0x01); /* PRI_B_CONFIG_FD_ALGO_RUN */ mt9t112_mcu_write(ret, client, VAR(27, 17), 0x0003); /* PRI_A_CONFIG_FD_ALGO_RUN */ mt9t112_mcu_write(ret, client, VAR(26, 17), 0x0003); /* * AFD range detection tuning registers. */ /* Search_f1_50 */ mt9t112_mcu_write(ret, client, VAR8(18, 165), 0x25); /* Search_f2_50 */ mt9t112_mcu_write(ret, client, VAR8(18, 166), 0x28); /* Search_f1_60 */ mt9t112_mcu_write(ret, client, VAR8(18, 167), 0x2C); /* Search_f2_60 */ mt9t112_mcu_write(ret, client, VAR8(18, 168), 0x2F); /* Period_50Hz (A) */ mt9t112_mcu_write(ret, client, VAR8(18, 68), 0xBA); /* Secret register by Aptina. */ /* Period_50Hz (A MSB) */ mt9t112_mcu_write(ret, client, VAR8(18, 303), 0x00); /* Period_60Hz (A) */ mt9t112_mcu_write(ret, client, VAR8(18, 69), 0x9B); /* Secret register by Aptina. */ /* Period_60Hz (A MSB) */ mt9t112_mcu_write(ret, client, VAR8(18, 301), 0x00); /* Period_50Hz (B) */ mt9t112_mcu_write(ret, client, VAR8(18, 140), 0x82); /* Secret register by Aptina. */ /* Period_50Hz (B) MSB */ mt9t112_mcu_write(ret, client, VAR8(18, 304), 0x00); /* Period_60Hz (B) */ mt9t112_mcu_write(ret, client, VAR8(18, 141), 0x6D); /* Secret register by Aptina. */ /* Period_60Hz (B) MSB */ mt9t112_mcu_write(ret, client, VAR8(18, 302), 0x00); /* FD Mode */ mt9t112_mcu_write(ret, client, VAR8(8, 2), 0x10); /* Stat_min */ mt9t112_mcu_write(ret, client, VAR8(8, 9), 0x02); /* Stat_max */ mt9t112_mcu_write(ret, client, VAR8(8, 10), 0x03); /* Min_amplitude */ mt9t112_mcu_write(ret, client, VAR8(8, 12), 0x0A); /* RX FIFO Watermark (A) */ mt9t112_mcu_write(ret, client, VAR(18, 70), 0x0014); /* RX FIFO Watermark (B) */ mt9t112_mcu_write(ret, client, VAR(18, 142), 0x0014); /* MCLK: 16MHz * PCLK: 73MHz * CorePixCLK: 36.5 MHz */ mt9t112_mcu_write(ret, client, VAR8(18, 0x0044), 133); mt9t112_mcu_write(ret, client, VAR8(18, 0x0045), 110); mt9t112_mcu_write(ret, client, VAR8(18, 0x008c), 130); mt9t112_mcu_write(ret, client, VAR8(18, 0x008d), 108); mt9t112_mcu_write(ret, client, VAR8(18, 0x00A5), 27); mt9t112_mcu_write(ret, client, VAR8(18, 0x00a6), 30); mt9t112_mcu_write(ret, client, VAR8(18, 0x00a7), 32); mt9t112_mcu_write(ret, client, VAR8(18, 0x00a8), 35); return ret; } static int mt9t112_auto_focus_setting(const struct i2c_client *client) { int ret; mt9t112_mcu_write(ret, client, VAR(12, 13), 0x000F); mt9t112_mcu_write(ret, client, VAR(12, 23), 0x0F0F); mt9t112_mcu_write(ret, client, VAR8(1, 0), 0x06); mt9t112_reg_write(ret, client, 0x0614, 0x0000); mt9t112_mcu_write(ret, client, VAR8(1, 0), 0x05); mt9t112_mcu_write(ret, client, VAR8(12, 2), 0x02); mt9t112_mcu_write(ret, client, VAR(12, 3), 0x0002); mt9t112_mcu_write(ret, client, VAR(17, 3), 0x8001); mt9t112_mcu_write(ret, client, VAR(17, 11), 0x0025); mt9t112_mcu_write(ret, client, VAR(17, 13), 0x0193); mt9t112_mcu_write(ret, client, VAR8(17, 33), 0x18); mt9t112_mcu_write(ret, client, VAR8(1, 0), 0x05); return ret; } static int mt9t112_auto_focus_trigger(const struct i2c_client *client) { int ret; mt9t112_mcu_write(ret, client, VAR8(12, 25), 0x01); return ret; } static int mt9t112_init_camera(const struct i2c_client *client) { int ret; ECHECKER(ret, mt9t112_reset(client)); ECHECKER(ret, mt9t112_init_pll(client)); ECHECKER(ret, mt9t112_init_setting(client)); ECHECKER(ret, mt9t112_auto_focus_setting(client)); mt9t112_reg_mask_set(ret, client, 0x0018, 0x0004, 0); /* Analog setting B.*/ mt9t112_reg_write(ret, client, 0x3084, 0x2409); mt9t112_reg_write(ret, client, 0x3092, 0x0A49); mt9t112_reg_write(ret, client, 0x3094, 0x4949); mt9t112_reg_write(ret, client, 0x3096, 0x4950); /* * Disable adaptive clock. * PRI_A_CONFIG_JPEG_OB_TX_CONTROL_VAR * PRI_B_CONFIG_JPEG_OB_TX_CONTROL_VAR */ mt9t112_mcu_write(ret, client, VAR(26, 160), 0x0A2E); mt9t112_mcu_write(ret, client, VAR(27, 160), 0x0A2E); /* * Configure Status in Status_before_length Format and enable header. * PRI_B_CONFIG_JPEG_OB_TX_CONTROL_VAR */ mt9t112_mcu_write(ret, client, VAR(27, 144), 0x0CB4); /* * Enable JPEG in context B. * PRI_B_CONFIG_JPEG_OB_TX_CONTROL_VAR */ mt9t112_mcu_write(ret, client, VAR8(27, 142), 0x01); /* Disable Dac_TXLO. */ mt9t112_reg_write(ret, client, 0x316C, 0x350F); /* Set max slew rates. */ mt9t112_reg_write(ret, client, 0x1E, 0x777); return ret; } /************************************************************************ * v4l2_subdev_core_ops ***********************************************************************/ #ifdef CONFIG_VIDEO_ADV_DEBUG static int mt9t112_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) { struct i2c_client *client = v4l2_get_subdevdata(sd); int ret; reg->size = 2; mt9t112_reg_read(ret, client, reg->reg); reg->val = (__u64)ret; return 0; } static int mt9t112_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg) { struct i2c_client *client = v4l2_get_subdevdata(sd); int ret; mt9t112_reg_write(ret, client, reg->reg, reg->val); return ret; } #endif static int mt9t112_power_on(struct mt9t112_priv *priv) { int ret; ret = clk_prepare_enable(priv->clk); if (ret) return ret; if (priv->standby_gpio) { gpiod_set_value(priv->standby_gpio, 0); msleep(100); } return 0; } static int mt9t112_power_off(struct mt9t112_priv *priv) { clk_disable_unprepare(priv->clk); if (priv->standby_gpio) { gpiod_set_value(priv->standby_gpio, 1); msleep(100); } return 0; } static int mt9t112_s_power(struct v4l2_subdev *sd, int on) { struct i2c_client *client = v4l2_get_subdevdata(sd); struct mt9t112_priv *priv = to_mt9t112(client); return on ? mt9t112_power_on(priv) : mt9t112_power_off(priv); } static const struct v4l2_subdev_core_ops mt9t112_subdev_core_ops = { #ifdef CONFIG_VIDEO_ADV_DEBUG .g_register = mt9t112_g_register, .s_register = mt9t112_s_register, #endif .s_power = mt9t112_s_power, }; /************************************************************************ * v4l2_subdev_video_ops **********************************************************************/ static int mt9t112_s_stream(struct v4l2_subdev *sd, int enable) { struct i2c_client *client = v4l2_get_subdevdata(sd); struct mt9t112_priv *priv = to_mt9t112(client); int ret = 0; if (!enable) { /* FIXME * * If user selected large output size, and used it long time, * mt9t112 camera will be very warm. * * But current driver can not stop mt9t112 camera. * So, set small size here to solve this problem. */ mt9t112_set_a_frame_size(client, VGA_WIDTH, VGA_HEIGHT); return ret; } if (!priv->init_done) { u16 param = MT9T112_FLAG_PCLK_RISING_EDGE & priv->info->flags ? 0x0001 : 0x0000; ECHECKER(ret, mt9t112_init_camera(client)); /* Invert PCLK (Data sampled on falling edge of pixclk). */ mt9t112_reg_write(ret, client, 0x3C20, param); mdelay(5); priv->init_done = true; } mt9t112_mcu_write(ret, client, VAR(26, 7), priv->format->fmt); mt9t112_mcu_write(ret, client, VAR(26, 9), priv->format->order); mt9t112_mcu_write(ret, client, VAR8(1, 0), 0x06); mt9t112_set_a_frame_size(client, priv->frame.width, priv->frame.height); ECHECKER(ret, mt9t112_auto_focus_trigger(client)); dev_dbg(&client->dev, "format : %d\n", priv->format->code); dev_dbg(&client->dev, "size : %d x %d\n", priv->frame.width, priv->frame.height); CLOCK_INFO(client, EXT_CLOCK); return ret; } static int mt9t112_set_params(struct mt9t112_priv *priv, const struct v4l2_rect *rect, u32 code) { int i; /* * get color format */ for (i = 0; i < priv->num_formats; i++) if (mt9t112_cfmts[i].code == code) break; if (i == priv->num_formats) return -EINVAL; priv->frame = *rect; /* * frame size check */ v4l_bound_align_image(&priv->frame.width, 0, MAX_WIDTH, 0, &priv->frame.height, 0, MAX_HEIGHT, 0, 0); priv->format = mt9t112_cfmts + i; return 0; } static int mt9t112_get_selection(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_selection *sel) { struct i2c_client *client = v4l2_get_subdevdata(sd); struct mt9t112_priv *priv = to_mt9t112(client); if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE) return -EINVAL; switch (sel->target) { case V4L2_SEL_TGT_CROP_BOUNDS: sel->r.left = 0; sel->r.top = 0; sel->r.width = MAX_WIDTH; sel->r.height = MAX_HEIGHT; return 0; case V4L2_SEL_TGT_CROP: sel->r = priv->frame; return 0; default: return -EINVAL; } } static int mt9t112_set_selection(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_selection *sel) { struct i2c_client *client = v4l2_get_subdevdata(sd); struct mt9t112_priv *priv = to_mt9t112(client); const struct v4l2_rect *rect = &sel->r; if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE || sel->target != V4L2_SEL_TGT_CROP) return -EINVAL; return mt9t112_set_params(priv, rect, priv->format->code); } static int mt9t112_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_format *format) { struct v4l2_mbus_framefmt *mf = &format->format; struct i2c_client *client = v4l2_get_subdevdata(sd); struct mt9t112_priv *priv = to_mt9t112(client); if (format->pad) return -EINVAL; mf->width = priv->frame.width; mf->height = priv->frame.height; mf->colorspace = priv->format->colorspace; mf->code = priv->format->code; mf->field = V4L2_FIELD_NONE; return 0; } static int mt9t112_s_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf) { struct i2c_client *client = v4l2_get_subdevdata(sd); struct mt9t112_priv *priv = to_mt9t112(client); struct v4l2_rect rect = { .width = mf->width, .height = mf->height, .left = priv->frame.left, .top = priv->frame.top, }; int ret; ret = mt9t112_set_params(priv, &rect, mf->code); if (!ret) mf->colorspace = priv->format->colorspace; return ret; } static int mt9t112_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_format *format) { struct i2c_client *client = v4l2_get_subdevdata(sd); struct v4l2_mbus_framefmt *mf = &format->format; struct mt9t112_priv *priv = to_mt9t112(client); int i; if (format->pad) return -EINVAL; for (i = 0; i < priv->num_formats; i++) if (mt9t112_cfmts[i].code == mf->code) break; if (i == priv->num_formats) { mf->code = MEDIA_BUS_FMT_UYVY8_2X8; mf->colorspace = V4L2_COLORSPACE_JPEG; } else { mf->colorspace = mt9t112_cfmts[i].colorspace; } v4l_bound_align_image(&mf->width, 0, MAX_WIDTH, 0, &mf->height, 0, MAX_HEIGHT, 0, 0); mf->field = V4L2_FIELD_NONE; if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) return mt9t112_s_fmt(sd, mf); return 0; } static int mt9t112_enum_mbus_code(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_mbus_code_enum *code) { struct i2c_client *client = v4l2_get_subdevdata(sd); struct mt9t112_priv *priv = to_mt9t112(client); if (code->pad || code->index >= priv->num_formats) return -EINVAL; code->code = mt9t112_cfmts[code->index].code; return 0; } static const struct v4l2_subdev_video_ops mt9t112_subdev_video_ops = { .s_stream = mt9t112_s_stream, }; static const struct v4l2_subdev_pad_ops mt9t112_subdev_pad_ops = { .enum_mbus_code = mt9t112_enum_mbus_code, .get_selection = mt9t112_get_selection, .set_selection = mt9t112_set_selection, .get_fmt = mt9t112_get_fmt, .set_fmt = mt9t112_set_fmt, }; /************************************************************************ * i2c driver ***********************************************************************/ static const struct v4l2_subdev_ops mt9t112_subdev_ops = { .core = &mt9t112_subdev_core_ops, .video = &mt9t112_subdev_video_ops, .pad = &mt9t112_subdev_pad_ops, }; static int mt9t112_camera_probe(struct i2c_client *client) { struct mt9t112_priv *priv = to_mt9t112(client); const char *devname; int chipid; int ret; ret = mt9t112_s_power(&priv->subdev, 1); if (ret < 0) return ret; /* Check and show chip ID. */ mt9t112_reg_read(chipid, client, 0x0000); switch (chipid) { case 0x2680: devname = "mt9t111"; priv->num_formats = 1; break; case 0x2682: devname = "mt9t112"; priv->num_formats = ARRAY_SIZE(mt9t112_cfmts); break; default: dev_err(&client->dev, "Product ID error %04x\n", chipid); ret = -ENODEV; goto done; } dev_info(&client->dev, "%s chip ID %04x\n", devname, chipid); done: mt9t112_s_power(&priv->subdev, 0); return ret; } static int mt9t112_probe(struct i2c_client *client) { struct mt9t112_priv *priv; int ret; if (!client->dev.platform_data) { dev_err(&client->dev, "mt9t112: missing platform data!\n"); return -EINVAL; } priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; priv->info = client->dev.platform_data; priv->init_done = false; v4l2_i2c_subdev_init(&priv->subdev, client, &mt9t112_subdev_ops); priv->clk = devm_clk_get(&client->dev, "extclk"); if (PTR_ERR(priv->clk) == -ENOENT) { priv->clk = NULL; } else if (IS_ERR(priv->clk)) { dev_err(&client->dev, "Unable to get clock \"extclk\"\n"); return PTR_ERR(priv->clk); } priv->standby_gpio = devm_gpiod_get_optional(&client->dev, "standby", GPIOD_OUT_HIGH); if (IS_ERR(priv->standby_gpio)) { dev_err(&client->dev, "Unable to get gpio \"standby\"\n"); return PTR_ERR(priv->standby_gpio); } ret = mt9t112_camera_probe(client); if (ret) return ret; return v4l2_async_register_subdev(&priv->subdev); } static void mt9t112_remove(struct i2c_client *client) { struct mt9t112_priv *priv = to_mt9t112(client); clk_disable_unprepare(priv->clk); v4l2_async_unregister_subdev(&priv->subdev); } static const struct i2c_device_id mt9t112_id[] = { { "mt9t112" }, { } }; MODULE_DEVICE_TABLE(i2c, mt9t112_id); static struct i2c_driver mt9t112_i2c_driver = { .driver = { .name = "mt9t112", }, .probe = mt9t112_probe, .remove = mt9t112_remove, .id_table = mt9t112_id, }; module_i2c_driver(mt9t112_i2c_driver); MODULE_DESCRIPTION("V4L2 driver for MT9T111/MT9T112 camera sensor"); MODULE_AUTHOR("Kuninori Morimoto"); MODULE_LICENSE("GPL v2");