// SPDX-License-Identifier: GPL-2.0 /* * Freescale eSDHC ColdFire family controller driver, platform bus. * * Copyright (c) 2020 Timesys Corporation * Author: Angelo Dureghello */ #include #include #include #include #include "sdhci-pltfm.h" #include "sdhci-esdhc.h" #define ESDHC_PROCTL_D3CD 0x08 #define ESDHC_SYS_CTRL_DTOCV_MASK 0x0f #define ESDHC_DEFAULT_HOST_CONTROL 0x28 /* * Freescale eSDHC has DMA ERR flag at bit 28, not as std spec says, bit 25. */ #define ESDHC_INT_VENDOR_SPEC_DMA_ERR BIT(28) struct pltfm_mcf_data { struct clk *clk_ipg; struct clk *clk_ahb; struct clk *clk_per; int aside; int current_bus_width; }; static inline void esdhc_mcf_buffer_swap32(u32 *buf, int len) { int i; u32 temp; len = (len + 3) >> 2; for (i = 0; i < len; i++) { temp = swab32(*buf); *buf++ = temp; } } static inline void esdhc_clrset_be(struct sdhci_host *host, u32 mask, u32 val, int reg) { void __iomem *base = host->ioaddr + (reg & ~3); u8 shift = (reg & 3) << 3; mask <<= shift; val <<= shift; if (reg == SDHCI_HOST_CONTROL) val |= ESDHC_PROCTL_D3CD; writel((readl(base) & ~mask) | val, base); } /* * Note: mcf is big-endian, single bytes need to be accessed at big endian * offsets. */ static void esdhc_mcf_writeb_be(struct sdhci_host *host, u8 val, int reg) { void __iomem *base = host->ioaddr + (reg & ~3); u8 shift = (reg & 3) << 3; u32 mask = ~(0xff << shift); if (reg == SDHCI_HOST_CONTROL) { u32 host_ctrl = ESDHC_DEFAULT_HOST_CONTROL; u8 dma_bits = (val & SDHCI_CTRL_DMA_MASK) >> 3; u8 tmp = readb(host->ioaddr + SDHCI_HOST_CONTROL + 1); tmp &= ~0x03; tmp |= dma_bits; /* * Recomposition needed, restore always endianness and * keep D3CD and AI, just setting bus width. */ host_ctrl |= val; host_ctrl |= (dma_bits << 8); writel(host_ctrl, host->ioaddr + SDHCI_HOST_CONTROL); return; } writel((readl(base) & mask) | (val << shift), base); } static void esdhc_mcf_writew_be(struct sdhci_host *host, u16 val, int reg) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct pltfm_mcf_data *mcf_data = sdhci_pltfm_priv(pltfm_host); void __iomem *base = host->ioaddr + (reg & ~3); u8 shift = (reg & 3) << 3; u32 mask = ~(0xffff << shift); switch (reg) { case SDHCI_TRANSFER_MODE: mcf_data->aside = val; return; case SDHCI_COMMAND: if (host->cmd->opcode == MMC_STOP_TRANSMISSION) val |= SDHCI_CMD_ABORTCMD; /* * As for the fsl driver, * we have to set the mode in a single write here. */ writel(val << 16 | mcf_data->aside, host->ioaddr + SDHCI_TRANSFER_MODE); return; } writel((readl(base) & mask) | (val << shift), base); } static void esdhc_mcf_writel_be(struct sdhci_host *host, u32 val, int reg) { writel(val, host->ioaddr + reg); } static u8 esdhc_mcf_readb_be(struct sdhci_host *host, int reg) { if (reg == SDHCI_HOST_CONTROL) { u8 __iomem *base = host->ioaddr + (reg & ~3); u16 val = readw(base + 2); u8 dma_bits = (val >> 5) & SDHCI_CTRL_DMA_MASK; u8 host_ctrl = val & 0xff; host_ctrl &= ~SDHCI_CTRL_DMA_MASK; host_ctrl |= dma_bits; return host_ctrl; } return readb(host->ioaddr + (reg ^ 0x3)); } static u16 esdhc_mcf_readw_be(struct sdhci_host *host, int reg) { /* * For SDHCI_HOST_VERSION, sdhci specs defines 0xFE, * a wrong offset for us, we are at 0xFC. */ if (reg == SDHCI_HOST_VERSION) reg -= 2; return readw(host->ioaddr + (reg ^ 0x2)); } static u32 esdhc_mcf_readl_be(struct sdhci_host *host, int reg) { u32 val; val = readl(host->ioaddr + reg); /* * RM (25.3.9) sd pin clock must never exceed 25Mhz. * So forcing legacy mode at 25Mhz. */ if (unlikely(reg == SDHCI_CAPABILITIES)) val &= ~SDHCI_CAN_DO_HISPD; if (unlikely(reg == SDHCI_INT_STATUS)) { if (val & ESDHC_INT_VENDOR_SPEC_DMA_ERR) { val &= ~ESDHC_INT_VENDOR_SPEC_DMA_ERR; val |= SDHCI_INT_ADMA_ERROR; } } return val; } static unsigned int esdhc_mcf_get_max_timeout_count(struct sdhci_host *host) { return 1 << 27; } static void esdhc_mcf_set_timeout(struct sdhci_host *host, struct mmc_command *cmd) { /* Use maximum timeout counter */ esdhc_clrset_be(host, ESDHC_SYS_CTRL_DTOCV_MASK, 0xE, SDHCI_TIMEOUT_CONTROL); } static void esdhc_mcf_reset(struct sdhci_host *host, u8 mask) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct pltfm_mcf_data *mcf_data = sdhci_pltfm_priv(pltfm_host); sdhci_reset(host, mask); esdhc_clrset_be(host, ESDHC_CTRL_BUSWIDTH_MASK, mcf_data->current_bus_width, SDHCI_HOST_CONTROL); sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); } static unsigned int esdhc_mcf_pltfm_get_max_clock(struct sdhci_host *host) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); return pltfm_host->clock; } static unsigned int esdhc_mcf_pltfm_get_min_clock(struct sdhci_host *host) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); return pltfm_host->clock / 256 / 16; } static void esdhc_mcf_pltfm_set_clock(struct sdhci_host *host, unsigned int clock) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); unsigned long *pll_dr = (unsigned long *)MCF_PLL_DR; u32 fvco, fsys, fesdhc, temp; const int sdclkfs[] = {2, 4, 8, 16, 32, 64, 128, 256}; int delta, old_delta = clock; int i, q, ri, rq; if (clock == 0) { host->mmc->actual_clock = 0; return; } /* * ColdFire eSDHC clock.s * * pll -+-> / outdiv1 --> fsys * +-> / outdiv3 --> eSDHC clock ---> / SDCCLKFS / DVS * * mcf5441x datasheet says: * (8.1.2) eSDHC should be 40 MHz max * (25.3.9) eSDHC input is, as example, 96 Mhz ... * (25.3.9) sd pin clock must never exceed 25Mhz * * fvco = fsys * outdvi1 + 1 * fshdc = fvco / outdiv3 + 1 */ temp = readl(pll_dr); fsys = pltfm_host->clock; fvco = fsys * ((temp & 0x1f) + 1); fesdhc = fvco / (((temp >> 10) & 0x1f) + 1); for (i = 0; i < 8; ++i) { int result = fesdhc / sdclkfs[i]; for (q = 1; q < 17; ++q) { int finale = result / q; delta = abs(clock - finale); if (delta < old_delta) { old_delta = delta; ri = i; rq = q; } } } /* * Apply divisors and re-enable all the clocks */ temp = ((sdclkfs[ri] >> 1) << 8) | ((rq - 1) << 4) | (ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN); esdhc_clrset_be(host, 0x0000fff7, temp, SDHCI_CLOCK_CONTROL); host->mmc->actual_clock = clock; mdelay(1); } static void esdhc_mcf_pltfm_set_bus_width(struct sdhci_host *host, int width) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct pltfm_mcf_data *mcf_data = sdhci_pltfm_priv(pltfm_host); switch (width) { case MMC_BUS_WIDTH_4: mcf_data->current_bus_width = ESDHC_CTRL_4BITBUS; break; default: mcf_data->current_bus_width = 0; break; } esdhc_clrset_be(host, ESDHC_CTRL_BUSWIDTH_MASK, mcf_data->current_bus_width, SDHCI_HOST_CONTROL); } static void esdhc_mcf_request_done(struct sdhci_host *host, struct mmc_request *mrq) { struct sg_mapping_iter sgm; u32 *buffer; if (!mrq->data || !mrq->data->bytes_xfered) goto exit_done; if (mmc_get_dma_dir(mrq->data) != DMA_FROM_DEVICE) goto exit_done; /* * On mcf5441x there is no hw sdma option/flag to select the dma * transfer endiannes. A swap after the transfer is needed. */ sg_miter_start(&sgm, mrq->data->sg, mrq->data->sg_len, SG_MITER_ATOMIC | SG_MITER_TO_SG | SG_MITER_FROM_SG); while (sg_miter_next(&sgm)) { buffer = sgm.addr; esdhc_mcf_buffer_swap32(buffer, sgm.length); } sg_miter_stop(&sgm); exit_done: mmc_request_done(host->mmc, mrq); } static void esdhc_mcf_copy_to_bounce_buffer(struct sdhci_host *host, struct mmc_data *data, unsigned int length) { sg_copy_to_buffer(data->sg, data->sg_len, host->bounce_buffer, length); esdhc_mcf_buffer_swap32((u32 *)host->bounce_buffer, data->blksz * data->blocks); } static const struct sdhci_ops sdhci_esdhc_ops = { .reset = esdhc_mcf_reset, .set_clock = esdhc_mcf_pltfm_set_clock, .get_max_clock = esdhc_mcf_pltfm_get_max_clock, .get_min_clock = esdhc_mcf_pltfm_get_min_clock, .set_bus_width = esdhc_mcf_pltfm_set_bus_width, .get_max_timeout_count = esdhc_mcf_get_max_timeout_count, .set_timeout = esdhc_mcf_set_timeout, .write_b = esdhc_mcf_writeb_be, .write_w = esdhc_mcf_writew_be, .write_l = esdhc_mcf_writel_be, .read_b = esdhc_mcf_readb_be, .read_w = esdhc_mcf_readw_be, .read_l = esdhc_mcf_readl_be, .copy_to_bounce_buffer = esdhc_mcf_copy_to_bounce_buffer, .request_done = esdhc_mcf_request_done, }; static const struct sdhci_pltfm_data sdhci_esdhc_mcf_pdata = { .ops = &sdhci_esdhc_ops, .quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_FORCE_DMA, /* * Mandatory quirk, * controller does not support cmd23, * without, on > 8G cards cmd23 is used, and * driver times out. */ SDHCI_QUIRK2_HOST_NO_CMD23, }; static int esdhc_mcf_plat_init(struct sdhci_host *host, struct pltfm_mcf_data *mcf_data) { struct mcf_esdhc_platform_data *plat_data; struct device *dev = mmc_dev(host->mmc); if (!dev->platform_data) { dev_err(dev, "no platform data!\n"); return -EINVAL; } plat_data = (struct mcf_esdhc_platform_data *)dev->platform_data; /* Card_detect */ switch (plat_data->cd_type) { default: case ESDHC_CD_CONTROLLER: /* We have a working card_detect back */ host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION; break; case ESDHC_CD_PERMANENT: host->mmc->caps |= MMC_CAP_NONREMOVABLE; break; case ESDHC_CD_NONE: break; } switch (plat_data->max_bus_width) { case 4: host->mmc->caps |= MMC_CAP_4_BIT_DATA; break; case 1: default: host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA; break; } return 0; } static int sdhci_esdhc_mcf_probe(struct platform_device *pdev) { struct sdhci_host *host; struct sdhci_pltfm_host *pltfm_host; struct pltfm_mcf_data *mcf_data; int err; host = sdhci_pltfm_init(pdev, &sdhci_esdhc_mcf_pdata, sizeof(*mcf_data)); if (IS_ERR(host)) return PTR_ERR(host); pltfm_host = sdhci_priv(host); mcf_data = sdhci_pltfm_priv(pltfm_host); host->sdma_boundary = 0; host->flags |= SDHCI_AUTO_CMD12; mcf_data->clk_ipg = devm_clk_get(&pdev->dev, "ipg"); if (IS_ERR(mcf_data->clk_ipg)) { err = PTR_ERR(mcf_data->clk_ipg); goto err_exit; } mcf_data->clk_ahb = devm_clk_get(&pdev->dev, "ahb"); if (IS_ERR(mcf_data->clk_ahb)) { err = PTR_ERR(mcf_data->clk_ahb); goto err_exit; } mcf_data->clk_per = devm_clk_get(&pdev->dev, "per"); if (IS_ERR(mcf_data->clk_per)) { err = PTR_ERR(mcf_data->clk_per); goto err_exit; } pltfm_host->clk = mcf_data->clk_per; pltfm_host->clock = clk_get_rate(pltfm_host->clk); err = clk_prepare_enable(mcf_data->clk_per); if (err) goto err_exit; err = clk_prepare_enable(mcf_data->clk_ipg); if (err) goto unprep_per; err = clk_prepare_enable(mcf_data->clk_ahb); if (err) goto unprep_ipg; err = esdhc_mcf_plat_init(host, mcf_data); if (err) goto unprep_ahb; err = sdhci_setup_host(host); if (err) goto unprep_ahb; if (!host->bounce_buffer) { dev_err(&pdev->dev, "bounce buffer not allocated"); err = -ENOMEM; goto cleanup; } err = __sdhci_add_host(host); if (err) goto cleanup; return 0; cleanup: sdhci_cleanup_host(host); unprep_ahb: clk_disable_unprepare(mcf_data->clk_ahb); unprep_ipg: clk_disable_unprepare(mcf_data->clk_ipg); unprep_per: clk_disable_unprepare(mcf_data->clk_per); err_exit: sdhci_pltfm_free(pdev); return err; } static void sdhci_esdhc_mcf_remove(struct platform_device *pdev) { struct sdhci_host *host = platform_get_drvdata(pdev); struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct pltfm_mcf_data *mcf_data = sdhci_pltfm_priv(pltfm_host); sdhci_remove_host(host, 0); clk_disable_unprepare(mcf_data->clk_ipg); clk_disable_unprepare(mcf_data->clk_ahb); clk_disable_unprepare(mcf_data->clk_per); sdhci_pltfm_free(pdev); } static struct platform_driver sdhci_esdhc_mcf_driver = { .driver = { .name = "sdhci-esdhc-mcf", .probe_type = PROBE_PREFER_ASYNCHRONOUS, }, .probe = sdhci_esdhc_mcf_probe, .remove = sdhci_esdhc_mcf_remove, }; module_platform_driver(sdhci_esdhc_mcf_driver); MODULE_DESCRIPTION("SDHCI driver for Freescale ColdFire eSDHC"); MODULE_AUTHOR("Angelo Dureghello "); MODULE_LICENSE("GPL v2");