// SPDX-License-Identifier: GPL-2.0 /* * Intel Lynxpoint PCH pinctrl/GPIO driver * * Copyright (c) 2012, 2019, Intel Corporation * Authors: Mathias Nyman * Andy Shevchenko */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "pinctrl-intel.h" #define COMMUNITY(p, n) \ { \ .pin_base = (p), \ .npins = (n), \ } static const struct pinctrl_pin_desc lptlp_pins[] = { PINCTRL_PIN(0, "GP0_UART1_RXD"), PINCTRL_PIN(1, "GP1_UART1_TXD"), PINCTRL_PIN(2, "GP2_UART1_RTSB"), PINCTRL_PIN(3, "GP3_UART1_CTSB"), PINCTRL_PIN(4, "GP4_I2C0_SDA"), PINCTRL_PIN(5, "GP5_I2C0_SCL"), PINCTRL_PIN(6, "GP6_I2C1_SDA"), PINCTRL_PIN(7, "GP7_I2C1_SCL"), PINCTRL_PIN(8, "GP8"), PINCTRL_PIN(9, "GP9"), PINCTRL_PIN(10, "GP10"), PINCTRL_PIN(11, "GP11_SMBALERTB"), PINCTRL_PIN(12, "GP12_LANPHYPC"), PINCTRL_PIN(13, "GP13"), PINCTRL_PIN(14, "GP14"), PINCTRL_PIN(15, "GP15"), PINCTRL_PIN(16, "GP16_MGPIO9"), PINCTRL_PIN(17, "GP17_MGPIO10"), PINCTRL_PIN(18, "GP18_SRC0CLKRQB"), PINCTRL_PIN(19, "GP19_SRC1CLKRQB"), PINCTRL_PIN(20, "GP20_SRC2CLKRQB"), PINCTRL_PIN(21, "GP21_SRC3CLKRQB"), PINCTRL_PIN(22, "GP22_SRC4CLKRQB_TRST2"), PINCTRL_PIN(23, "GP23_SRC5CLKRQB_TDI2"), PINCTRL_PIN(24, "GP24_MGPIO0"), PINCTRL_PIN(25, "GP25_USBWAKEOUTB"), PINCTRL_PIN(26, "GP26_MGPIO5"), PINCTRL_PIN(27, "GP27_MGPIO6"), PINCTRL_PIN(28, "GP28_MGPIO7"), PINCTRL_PIN(29, "GP29_SLP_WLANB_MGPIO3"), PINCTRL_PIN(30, "GP30_SUSWARNB_SUSPWRDNACK_MGPIO1"), PINCTRL_PIN(31, "GP31_ACPRESENT_MGPIO2"), PINCTRL_PIN(32, "GP32_CLKRUNB"), PINCTRL_PIN(33, "GP33_DEVSLP0"), PINCTRL_PIN(34, "GP34_SATA0XPCIE6L3B_SATA0GP"), PINCTRL_PIN(35, "GP35_SATA1XPCIE6L2B_SATA1GP"), PINCTRL_PIN(36, "GP36_SATA2XPCIE6L1B_SATA2GP"), PINCTRL_PIN(37, "GP37_SATA3XPCIE6L0B_SATA3GP"), PINCTRL_PIN(38, "GP38_DEVSLP1"), PINCTRL_PIN(39, "GP39_DEVSLP2"), PINCTRL_PIN(40, "GP40_OC0B"), PINCTRL_PIN(41, "GP41_OC1B"), PINCTRL_PIN(42, "GP42_OC2B"), PINCTRL_PIN(43, "GP43_OC3B"), PINCTRL_PIN(44, "GP44"), PINCTRL_PIN(45, "GP45_TMS2"), PINCTRL_PIN(46, "GP46_TDO2"), PINCTRL_PIN(47, "GP47"), PINCTRL_PIN(48, "GP48"), PINCTRL_PIN(49, "GP49"), PINCTRL_PIN(50, "GP50"), PINCTRL_PIN(51, "GP51_GSXDOUT"), PINCTRL_PIN(52, "GP52_GSXSLOAD"), PINCTRL_PIN(53, "GP53_GSXDIN"), PINCTRL_PIN(54, "GP54_GSXSRESETB"), PINCTRL_PIN(55, "GP55_GSXCLK"), PINCTRL_PIN(56, "GP56"), PINCTRL_PIN(57, "GP57"), PINCTRL_PIN(58, "GP58"), PINCTRL_PIN(59, "GP59"), PINCTRL_PIN(60, "GP60_SML0ALERTB_MGPIO4"), PINCTRL_PIN(61, "GP61_SUS_STATB"), PINCTRL_PIN(62, "GP62_SUSCLK"), PINCTRL_PIN(63, "GP63_SLP_S5B"), PINCTRL_PIN(64, "GP64_SDIO_CLK"), PINCTRL_PIN(65, "GP65_SDIO_CMD"), PINCTRL_PIN(66, "GP66_SDIO_D0"), PINCTRL_PIN(67, "GP67_SDIO_D1"), PINCTRL_PIN(68, "GP68_SDIO_D2"), PINCTRL_PIN(69, "GP69_SDIO_D3"), PINCTRL_PIN(70, "GP70_SDIO_POWER_EN"), PINCTRL_PIN(71, "GP71_MPHYPC"), PINCTRL_PIN(72, "GP72_BATLOWB"), PINCTRL_PIN(73, "GP73_SML1ALERTB_PCHHOTB_MGPIO8"), PINCTRL_PIN(74, "GP74_SML1DATA_MGPIO12"), PINCTRL_PIN(75, "GP75_SML1CLK_MGPIO11"), PINCTRL_PIN(76, "GP76_BMBUSYB"), PINCTRL_PIN(77, "GP77_PIRQAB"), PINCTRL_PIN(78, "GP78_PIRQBB"), PINCTRL_PIN(79, "GP79_PIRQCB"), PINCTRL_PIN(80, "GP80_PIRQDB"), PINCTRL_PIN(81, "GP81_SPKR"), PINCTRL_PIN(82, "GP82_RCINB"), PINCTRL_PIN(83, "GP83_GSPI0_CSB"), PINCTRL_PIN(84, "GP84_GSPI0_CLK"), PINCTRL_PIN(85, "GP85_GSPI0_MISO"), PINCTRL_PIN(86, "GP86_GSPI0_MOSI"), PINCTRL_PIN(87, "GP87_GSPI1_CSB"), PINCTRL_PIN(88, "GP88_GSPI1_CLK"), PINCTRL_PIN(89, "GP89_GSPI1_MISO"), PINCTRL_PIN(90, "GP90_GSPI1_MOSI"), PINCTRL_PIN(91, "GP91_UART0_RXD"), PINCTRL_PIN(92, "GP92_UART0_TXD"), PINCTRL_PIN(93, "GP93_UART0_RTSB"), PINCTRL_PIN(94, "GP94_UART0_CTSB"), }; static const struct intel_community lptlp_communities[] = { COMMUNITY(0, 95), }; static const struct intel_pinctrl_soc_data lptlp_soc_data = { .pins = lptlp_pins, .npins = ARRAY_SIZE(lptlp_pins), .communities = lptlp_communities, .ncommunities = ARRAY_SIZE(lptlp_communities), }; /* LynxPoint chipset has support for 95 GPIO pins */ #define LP_NUM_GPIO 95 /* Bitmapped register offsets */ #define LP_ACPI_OWNED 0x00 /* Bitmap, set by bios, 0: pin reserved for ACPI */ #define LP_IRQ2IOXAPIC 0x10 /* Bitmap, set by bios, 1: pin routed to IOxAPIC */ #define LP_GC 0x7C /* set APIC IRQ to IRQ14 or IRQ15 for all pins */ #define LP_INT_STAT 0x80 #define LP_INT_ENABLE 0x90 /* Each pin has two 32 bit config registers, starting at 0x100 */ #define LP_CONFIG1 0x100 #define LP_CONFIG2 0x104 /* LP_CONFIG1 reg bits */ #define OUT_LVL_BIT BIT(31) #define IN_LVL_BIT BIT(30) #define TRIG_SEL_BIT BIT(4) /* 0: Edge, 1: Level */ #define INT_INV_BIT BIT(3) /* Invert interrupt triggering */ #define DIR_BIT BIT(2) /* 0: Output, 1: Input */ #define USE_SEL_MASK GENMASK(1, 0) /* 0: Native, 1: GPIO, ... */ #define USE_SEL_NATIVE (0 << 0) #define USE_SEL_GPIO (1 << 0) /* LP_CONFIG2 reg bits */ #define GPINDIS_BIT BIT(2) /* disable input sensing */ #define GPIWP_MASK GENMASK(1, 0) /* weak pull options */ #define GPIWP_NONE 0 /* none */ #define GPIWP_DOWN 1 /* weak pull down */ #define GPIWP_UP 2 /* weak pull up */ /* * Lynxpoint gpios are controlled through both bitmapped registers and * per gpio specific registers. The bitmapped registers are in chunks of * 3 x 32bit registers to cover all 95 GPIOs * * per gpio specific registers consist of two 32bit registers per gpio * (LP_CONFIG1 and LP_CONFIG2), with 95 GPIOs there's a total of * 190 config registers. * * A simplified view of the register layout look like this: * * LP_ACPI_OWNED[31:0] gpio ownerships for gpios 0-31 (bitmapped registers) * LP_ACPI_OWNED[63:32] gpio ownerships for gpios 32-63 * LP_ACPI_OWNED[94:64] gpio ownerships for gpios 63-94 * ... * LP_INT_ENABLE[31:0] ... * LP_INT_ENABLE[63:32] ... * LP_INT_ENABLE[94:64] ... * LP0_CONFIG1 (gpio 0) config1 reg for gpio 0 (per gpio registers) * LP0_CONFIG2 (gpio 0) config2 reg for gpio 0 * LP1_CONFIG1 (gpio 1) config1 reg for gpio 1 * LP1_CONFIG2 (gpio 1) config2 reg for gpio 1 * LP2_CONFIG1 (gpio 2) ... * LP2_CONFIG2 (gpio 2) ... * ... * LP94_CONFIG1 (gpio 94) ... * LP94_CONFIG2 (gpio 94) ... * * IOxAPIC redirection map applies only for gpio 8-10, 13-14, 45-55. */ static void __iomem *lp_gpio_reg(struct gpio_chip *chip, unsigned int offset, int reg) { struct intel_pinctrl *lg = gpiochip_get_data(chip); const struct intel_community *comm; int reg_offset; comm = intel_get_community(lg, offset); if (!comm) return NULL; offset -= comm->pin_base; if (reg == LP_CONFIG1 || reg == LP_CONFIG2) /* per gpio specific config registers */ reg_offset = offset * 8; else /* bitmapped registers */ reg_offset = (offset / 32) * 4; return comm->regs + reg_offset + reg; } static bool lp_gpio_acpi_use(struct intel_pinctrl *lg, unsigned int pin) { void __iomem *acpi_use; acpi_use = lp_gpio_reg(&lg->chip, pin, LP_ACPI_OWNED); if (!acpi_use) return true; return !(ioread32(acpi_use) & BIT(pin % 32)); } static bool lp_gpio_ioxapic_use(struct gpio_chip *chip, unsigned int offset) { void __iomem *ioxapic_use = lp_gpio_reg(chip, offset, LP_IRQ2IOXAPIC); u32 value; value = ioread32(ioxapic_use); if (offset >= 8 && offset <= 10) return !!(value & BIT(offset - 8 + 0)); if (offset >= 13 && offset <= 14) return !!(value & BIT(offset - 13 + 3)); if (offset >= 45 && offset <= 55) return !!(value & BIT(offset - 45 + 5)); return false; } static void lp_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s, unsigned int pin) { struct intel_pinctrl *lg = pinctrl_dev_get_drvdata(pctldev); void __iomem *reg = lp_gpio_reg(&lg->chip, pin, LP_CONFIG1); void __iomem *conf2 = lp_gpio_reg(&lg->chip, pin, LP_CONFIG2); u32 value, mode; value = ioread32(reg); mode = value & USE_SEL_MASK; if (mode == USE_SEL_GPIO) seq_puts(s, "GPIO "); else seq_printf(s, "mode %d ", mode); seq_printf(s, "0x%08x 0x%08x", value, ioread32(conf2)); if (lp_gpio_acpi_use(lg, pin)) seq_puts(s, " [ACPI]"); } static const struct pinctrl_ops lptlp_pinctrl_ops = { .get_groups_count = intel_get_groups_count, .get_group_name = intel_get_group_name, .get_group_pins = intel_get_group_pins, .pin_dbg_show = lp_pin_dbg_show, }; static int lp_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned int function, unsigned int group) { struct intel_pinctrl *lg = pinctrl_dev_get_drvdata(pctldev); const struct intel_pingroup *grp = &lg->soc->groups[group]; int i; guard(raw_spinlock_irqsave)(&lg->lock); /* Now enable the mux setting for each pin in the group */ for (i = 0; i < grp->grp.npins; i++) { void __iomem *reg = lp_gpio_reg(&lg->chip, grp->grp.pins[i], LP_CONFIG1); u32 value; value = ioread32(reg); value &= ~USE_SEL_MASK; if (grp->modes) value |= grp->modes[i]; else value |= grp->mode; iowrite32(value, reg); } return 0; } static void lp_gpio_enable_input(void __iomem *reg) { iowrite32(ioread32(reg) & ~GPINDIS_BIT, reg); } static void lp_gpio_disable_input(void __iomem *reg) { iowrite32(ioread32(reg) | GPINDIS_BIT, reg); } static int lp_gpio_request_enable(struct pinctrl_dev *pctldev, struct pinctrl_gpio_range *range, unsigned int pin) { struct intel_pinctrl *lg = pinctrl_dev_get_drvdata(pctldev); void __iomem *reg = lp_gpio_reg(&lg->chip, pin, LP_CONFIG1); void __iomem *conf2 = lp_gpio_reg(&lg->chip, pin, LP_CONFIG2); u32 value; guard(raw_spinlock_irqsave)(&lg->lock); /* * Reconfigure pin to GPIO mode if needed and issue a warning, * since we expect firmware to configure it properly. */ value = ioread32(reg); if ((value & USE_SEL_MASK) != USE_SEL_GPIO) { iowrite32((value & USE_SEL_MASK) | USE_SEL_GPIO, reg); dev_warn(lg->dev, FW_BUG "pin %u forcibly reconfigured as GPIO\n", pin); } /* Enable input sensing */ lp_gpio_enable_input(conf2); return 0; } static void lp_gpio_disable_free(struct pinctrl_dev *pctldev, struct pinctrl_gpio_range *range, unsigned int pin) { struct intel_pinctrl *lg = pinctrl_dev_get_drvdata(pctldev); void __iomem *conf2 = lp_gpio_reg(&lg->chip, pin, LP_CONFIG2); guard(raw_spinlock_irqsave)(&lg->lock); /* Disable input sensing */ lp_gpio_disable_input(conf2); } static int lp_gpio_set_direction(struct pinctrl_dev *pctldev, struct pinctrl_gpio_range *range, unsigned int pin, bool input) { struct intel_pinctrl *lg = pinctrl_dev_get_drvdata(pctldev); void __iomem *reg = lp_gpio_reg(&lg->chip, pin, LP_CONFIG1); u32 value; guard(raw_spinlock_irqsave)(&lg->lock); value = ioread32(reg); value &= ~DIR_BIT; if (input) { value |= DIR_BIT; } else { /* * Before making any direction modifications, do a check if GPIO * is set for direct IRQ. On Lynxpoint, setting GPIO to output * does not make sense, so let's at least warn the caller before * they shoot themselves in the foot. */ WARN(lp_gpio_ioxapic_use(&lg->chip, pin), "Potential Error: Setting GPIO to output with IOxAPIC redirection"); } iowrite32(value, reg); return 0; } static const struct pinmux_ops lptlp_pinmux_ops = { .get_functions_count = intel_get_functions_count, .get_function_name = intel_get_function_name, .get_function_groups = intel_get_function_groups, .set_mux = lp_pinmux_set_mux, .gpio_request_enable = lp_gpio_request_enable, .gpio_disable_free = lp_gpio_disable_free, .gpio_set_direction = lp_gpio_set_direction, }; static int lp_pin_config_get(struct pinctrl_dev *pctldev, unsigned int pin, unsigned long *config) { struct intel_pinctrl *lg = pinctrl_dev_get_drvdata(pctldev); void __iomem *conf2 = lp_gpio_reg(&lg->chip, pin, LP_CONFIG2); enum pin_config_param param = pinconf_to_config_param(*config); u32 value, pull; u16 arg; scoped_guard(raw_spinlock_irqsave, &lg->lock) value = ioread32(conf2); pull = value & GPIWP_MASK; switch (param) { case PIN_CONFIG_BIAS_DISABLE: if (pull != GPIWP_NONE) return -EINVAL; arg = 0; break; case PIN_CONFIG_BIAS_PULL_DOWN: if (pull != GPIWP_DOWN) return -EINVAL; arg = 1; break; case PIN_CONFIG_BIAS_PULL_UP: if (pull != GPIWP_UP) return -EINVAL; arg = 1; break; default: return -ENOTSUPP; } *config = pinconf_to_config_packed(param, arg); return 0; } static int lp_pin_config_set(struct pinctrl_dev *pctldev, unsigned int pin, unsigned long *configs, unsigned int num_configs) { struct intel_pinctrl *lg = pinctrl_dev_get_drvdata(pctldev); void __iomem *conf2 = lp_gpio_reg(&lg->chip, pin, LP_CONFIG2); enum pin_config_param param; unsigned int i; u32 value; guard(raw_spinlock_irqsave)(&lg->lock); value = ioread32(conf2); for (i = 0; i < num_configs; i++) { param = pinconf_to_config_param(configs[i]); switch (param) { case PIN_CONFIG_BIAS_DISABLE: value &= ~GPIWP_MASK; value |= GPIWP_NONE; break; case PIN_CONFIG_BIAS_PULL_DOWN: value &= ~GPIWP_MASK; value |= GPIWP_DOWN; break; case PIN_CONFIG_BIAS_PULL_UP: value &= ~GPIWP_MASK; value |= GPIWP_UP; break; default: return -ENOTSUPP; } } iowrite32(value, conf2); return 0; } static const struct pinconf_ops lptlp_pinconf_ops = { .is_generic = true, .pin_config_get = lp_pin_config_get, .pin_config_set = lp_pin_config_set, }; static const struct pinctrl_desc lptlp_pinctrl_desc = { .pctlops = &lptlp_pinctrl_ops, .pmxops = &lptlp_pinmux_ops, .confops = &lptlp_pinconf_ops, .owner = THIS_MODULE, }; static int lp_gpio_get(struct gpio_chip *chip, unsigned int offset) { void __iomem *reg = lp_gpio_reg(chip, offset, LP_CONFIG1); return !!(ioread32(reg) & IN_LVL_BIT); } static void lp_gpio_set(struct gpio_chip *chip, unsigned int offset, int value) { struct intel_pinctrl *lg = gpiochip_get_data(chip); void __iomem *reg = lp_gpio_reg(chip, offset, LP_CONFIG1); guard(raw_spinlock_irqsave)(&lg->lock); if (value) iowrite32(ioread32(reg) | OUT_LVL_BIT, reg); else iowrite32(ioread32(reg) & ~OUT_LVL_BIT, reg); } static int lp_gpio_direction_input(struct gpio_chip *chip, unsigned int offset) { return pinctrl_gpio_direction_input(chip, offset); } static int lp_gpio_direction_output(struct gpio_chip *chip, unsigned int offset, int value) { lp_gpio_set(chip, offset, value); return pinctrl_gpio_direction_output(chip, offset); } static int lp_gpio_get_direction(struct gpio_chip *chip, unsigned int offset) { void __iomem *reg = lp_gpio_reg(chip, offset, LP_CONFIG1); if (ioread32(reg) & DIR_BIT) return GPIO_LINE_DIRECTION_IN; return GPIO_LINE_DIRECTION_OUT; } static void lp_gpio_irq_handler(struct irq_desc *desc) { struct irq_data *data = irq_desc_get_irq_data(desc); struct gpio_chip *gc = irq_desc_get_handler_data(desc); struct intel_pinctrl *lg = gpiochip_get_data(gc); struct irq_chip *chip = irq_data_get_irq_chip(data); void __iomem *reg, *ena; unsigned long pending; u32 base, pin; /* check from GPIO controller which pin triggered the interrupt */ for (base = 0; base < lg->chip.ngpio; base += 32) { reg = lp_gpio_reg(&lg->chip, base, LP_INT_STAT); ena = lp_gpio_reg(&lg->chip, base, LP_INT_ENABLE); /* Only interrupts that are enabled */ pending = ioread32(reg) & ioread32(ena); for_each_set_bit(pin, &pending, 32) generic_handle_domain_irq(lg->chip.irq.domain, base + pin); } chip->irq_eoi(data); } static void lp_irq_ack(struct irq_data *d) { struct gpio_chip *gc = irq_data_get_irq_chip_data(d); struct intel_pinctrl *lg = gpiochip_get_data(gc); irq_hw_number_t hwirq = irqd_to_hwirq(d); void __iomem *reg = lp_gpio_reg(&lg->chip, hwirq, LP_INT_STAT); guard(raw_spinlock_irqsave)(&lg->lock); iowrite32(BIT(hwirq % 32), reg); } static void lp_irq_unmask(struct irq_data *d) { } static void lp_irq_mask(struct irq_data *d) { } static void lp_irq_enable(struct irq_data *d) { struct gpio_chip *gc = irq_data_get_irq_chip_data(d); struct intel_pinctrl *lg = gpiochip_get_data(gc); irq_hw_number_t hwirq = irqd_to_hwirq(d); void __iomem *reg = lp_gpio_reg(&lg->chip, hwirq, LP_INT_ENABLE); gpiochip_enable_irq(gc, hwirq); scoped_guard(raw_spinlock_irqsave, &lg->lock) iowrite32(ioread32(reg) | BIT(hwirq % 32), reg); } static void lp_irq_disable(struct irq_data *d) { struct gpio_chip *gc = irq_data_get_irq_chip_data(d); struct intel_pinctrl *lg = gpiochip_get_data(gc); irq_hw_number_t hwirq = irqd_to_hwirq(d); void __iomem *reg = lp_gpio_reg(&lg->chip, hwirq, LP_INT_ENABLE); scoped_guard(raw_spinlock_irqsave, &lg->lock) iowrite32(ioread32(reg) & ~BIT(hwirq % 32), reg); gpiochip_disable_irq(gc, hwirq); } static int lp_irq_set_type(struct irq_data *d, unsigned int type) { struct gpio_chip *gc = irq_data_get_irq_chip_data(d); struct intel_pinctrl *lg = gpiochip_get_data(gc); irq_hw_number_t hwirq = irqd_to_hwirq(d); void __iomem *reg; u32 value; reg = lp_gpio_reg(&lg->chip, hwirq, LP_CONFIG1); if (!reg) return -EINVAL; /* Fail if BIOS reserved pin for ACPI use */ if (lp_gpio_acpi_use(lg, hwirq)) { dev_err(lg->dev, "pin %lu can't be used as IRQ\n", hwirq); return -EBUSY; } guard(raw_spinlock_irqsave)(&lg->lock); value = ioread32(reg); /* set both TRIG_SEL and INV bits to 0 for rising edge */ if (type & IRQ_TYPE_EDGE_RISING) value &= ~(TRIG_SEL_BIT | INT_INV_BIT); /* TRIG_SEL bit 0, INV bit 1 for falling edge */ if (type & IRQ_TYPE_EDGE_FALLING) value = (value | INT_INV_BIT) & ~TRIG_SEL_BIT; /* TRIG_SEL bit 1, INV bit 0 for level low */ if (type & IRQ_TYPE_LEVEL_LOW) value = (value | TRIG_SEL_BIT) & ~INT_INV_BIT; /* TRIG_SEL bit 1, INV bit 1 for level high */ if (type & IRQ_TYPE_LEVEL_HIGH) value |= TRIG_SEL_BIT | INT_INV_BIT; iowrite32(value, reg); if (type & IRQ_TYPE_EDGE_BOTH) irq_set_handler_locked(d, handle_edge_irq); else if (type & IRQ_TYPE_LEVEL_MASK) irq_set_handler_locked(d, handle_level_irq); return 0; } static const struct irq_chip lp_irqchip = { .name = "LP-GPIO", .irq_ack = lp_irq_ack, .irq_mask = lp_irq_mask, .irq_unmask = lp_irq_unmask, .irq_enable = lp_irq_enable, .irq_disable = lp_irq_disable, .irq_set_type = lp_irq_set_type, .flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_IMMUTABLE, GPIOCHIP_IRQ_RESOURCE_HELPERS, }; static int lp_gpio_irq_init_hw(struct gpio_chip *chip) { struct intel_pinctrl *lg = gpiochip_get_data(chip); void __iomem *reg; unsigned int base; for (base = 0; base < lg->chip.ngpio; base += 32) { /* disable gpio pin interrupts */ reg = lp_gpio_reg(&lg->chip, base, LP_INT_ENABLE); iowrite32(0, reg); /* Clear interrupt status register */ reg = lp_gpio_reg(&lg->chip, base, LP_INT_STAT); iowrite32(0xffffffff, reg); } return 0; } static int lp_gpio_add_pin_ranges(struct gpio_chip *chip) { struct intel_pinctrl *lg = gpiochip_get_data(chip); struct device *dev = lg->dev; int ret; ret = gpiochip_add_pin_range(chip, dev_name(dev), 0, 0, lg->soc->npins); if (ret) dev_err(dev, "failed to add GPIO pin range\n"); return ret; } static int lp_gpio_probe(struct platform_device *pdev) { const struct intel_pinctrl_soc_data *soc; struct intel_pinctrl *lg; struct gpio_chip *gc; struct device *dev = &pdev->dev; struct resource *io_rc; void __iomem *regs; unsigned int i; int irq, ret; soc = (const struct intel_pinctrl_soc_data *)device_get_match_data(dev); if (!soc) return -ENODEV; lg = devm_kzalloc(dev, sizeof(*lg), GFP_KERNEL); if (!lg) return -ENOMEM; lg->dev = dev; lg->soc = soc; lg->ncommunities = lg->soc->ncommunities; lg->communities = devm_kcalloc(dev, lg->ncommunities, sizeof(*lg->communities), GFP_KERNEL); if (!lg->communities) return -ENOMEM; lg->pctldesc = lptlp_pinctrl_desc; lg->pctldesc.name = dev_name(dev); lg->pctldesc.pins = lg->soc->pins; lg->pctldesc.npins = lg->soc->npins; lg->pctldev = devm_pinctrl_register(dev, &lg->pctldesc, lg); if (IS_ERR(lg->pctldev)) { dev_err(dev, "failed to register pinctrl driver\n"); return PTR_ERR(lg->pctldev); } platform_set_drvdata(pdev, lg); io_rc = platform_get_resource(pdev, IORESOURCE_IO, 0); if (!io_rc) { dev_err(dev, "missing IO resources\n"); return -EINVAL; } regs = devm_ioport_map(dev, io_rc->start, resource_size(io_rc)); if (!regs) { dev_err(dev, "failed mapping IO region %pR\n", &io_rc); return -EBUSY; } for (i = 0; i < lg->soc->ncommunities; i++) { struct intel_community *comm = &lg->communities[i]; *comm = lg->soc->communities[i]; comm->regs = regs; comm->pad_regs = regs + 0x100; } raw_spin_lock_init(&lg->lock); gc = &lg->chip; gc->label = dev_name(dev); gc->owner = THIS_MODULE; gc->request = gpiochip_generic_request; gc->free = gpiochip_generic_free; gc->direction_input = lp_gpio_direction_input; gc->direction_output = lp_gpio_direction_output; gc->get = lp_gpio_get; gc->set = lp_gpio_set; gc->set_config = gpiochip_generic_config; gc->get_direction = lp_gpio_get_direction; gc->base = -1; gc->ngpio = LP_NUM_GPIO; gc->can_sleep = false; gc->add_pin_ranges = lp_gpio_add_pin_ranges; gc->parent = dev; /* set up interrupts */ irq = platform_get_irq_optional(pdev, 0); if (irq > 0) { struct gpio_irq_chip *girq; girq = &gc->irq; gpio_irq_chip_set_chip(girq, &lp_irqchip); girq->init_hw = lp_gpio_irq_init_hw; girq->parent_handler = lp_gpio_irq_handler; girq->num_parents = 1; girq->parents = devm_kcalloc(dev, girq->num_parents, sizeof(*girq->parents), GFP_KERNEL); if (!girq->parents) return -ENOMEM; girq->parents[0] = irq; girq->default_type = IRQ_TYPE_NONE; girq->handler = handle_bad_irq; } ret = devm_gpiochip_add_data(dev, gc, lg); if (ret) { dev_err(dev, "failed adding lp-gpio chip\n"); return ret; } return 0; } static int lp_gpio_resume(struct device *dev) { struct intel_pinctrl *lg = dev_get_drvdata(dev); struct gpio_chip *chip = &lg->chip; const char *dummy; int i; /* on some hardware suspend clears input sensing, re-enable it here */ for_each_requested_gpio(chip, i, dummy) lp_gpio_enable_input(lp_gpio_reg(chip, i, LP_CONFIG2)); return 0; } static DEFINE_SIMPLE_DEV_PM_OPS(lp_gpio_pm_ops, NULL, lp_gpio_resume); static const struct acpi_device_id lynxpoint_gpio_acpi_match[] = { { "INT33C7", (kernel_ulong_t)&lptlp_soc_data }, { "INT3437", (kernel_ulong_t)&lptlp_soc_data }, { } }; MODULE_DEVICE_TABLE(acpi, lynxpoint_gpio_acpi_match); static struct platform_driver lp_gpio_driver = { .probe = lp_gpio_probe, .driver = { .name = "lp_gpio", .pm = pm_sleep_ptr(&lp_gpio_pm_ops), .acpi_match_table = lynxpoint_gpio_acpi_match, }, }; static int __init lp_gpio_init(void) { return platform_driver_register(&lp_gpio_driver); } subsys_initcall(lp_gpio_init); static void __exit lp_gpio_exit(void) { platform_driver_unregister(&lp_gpio_driver); } module_exit(lp_gpio_exit); MODULE_AUTHOR("Mathias Nyman (Intel)"); MODULE_AUTHOR("Andy Shevchenko (Intel)"); MODULE_DESCRIPTION("Intel Lynxpoint pinctrl driver"); MODULE_LICENSE("GPL v2"); MODULE_ALIAS("platform:lp_gpio"); MODULE_IMPORT_NS("PINCTRL_INTEL");