// SPDX-License-Identifier: GPL-2.0-or-later /* * Freescale LINFlexD UART serial port driver * * Copyright 2012-2016 Freescale Semiconductor, Inc. * Copyright 2017-2019 NXP */ #include #include #include #include #include #include #include #include #include #include /* All registers are 32-bit width */ #define LINCR1 0x0000 /* LIN control register */ #define LINIER 0x0004 /* LIN interrupt enable register */ #define LINSR 0x0008 /* LIN status register */ #define LINESR 0x000C /* LIN error status register */ #define UARTCR 0x0010 /* UART mode control register */ #define UARTSR 0x0014 /* UART mode status register */ #define LINTCSR 0x0018 /* LIN timeout control status register */ #define LINOCR 0x001C /* LIN output compare register */ #define LINTOCR 0x0020 /* LIN timeout control register */ #define LINFBRR 0x0024 /* LIN fractional baud rate register */ #define LINIBRR 0x0028 /* LIN integer baud rate register */ #define LINCFR 0x002C /* LIN checksum field register */ #define LINCR2 0x0030 /* LIN control register 2 */ #define BIDR 0x0034 /* Buffer identifier register */ #define BDRL 0x0038 /* Buffer data register least significant */ #define BDRM 0x003C /* Buffer data register most significant */ #define IFER 0x0040 /* Identifier filter enable register */ #define IFMI 0x0044 /* Identifier filter match index */ #define IFMR 0x0048 /* Identifier filter mode register */ #define GCR 0x004C /* Global control register */ #define UARTPTO 0x0050 /* UART preset timeout register */ #define UARTCTO 0x0054 /* UART current timeout register */ /* * Register field definitions */ #define LINFLEXD_LINCR1_INIT BIT(0) #define LINFLEXD_LINCR1_MME BIT(4) #define LINFLEXD_LINCR1_BF BIT(7) #define LINFLEXD_LINSR_LINS_INITMODE BIT(12) #define LINFLEXD_LINSR_LINS_MASK (0xF << 12) #define LINFLEXD_LINIER_SZIE BIT(15) #define LINFLEXD_LINIER_OCIE BIT(14) #define LINFLEXD_LINIER_BEIE BIT(13) #define LINFLEXD_LINIER_CEIE BIT(12) #define LINFLEXD_LINIER_HEIE BIT(11) #define LINFLEXD_LINIER_FEIE BIT(8) #define LINFLEXD_LINIER_BOIE BIT(7) #define LINFLEXD_LINIER_LSIE BIT(6) #define LINFLEXD_LINIER_WUIE BIT(5) #define LINFLEXD_LINIER_DBFIE BIT(4) #define LINFLEXD_LINIER_DBEIETOIE BIT(3) #define LINFLEXD_LINIER_DRIE BIT(2) #define LINFLEXD_LINIER_DTIE BIT(1) #define LINFLEXD_LINIER_HRIE BIT(0) #define LINFLEXD_UARTCR_OSR_MASK (0xF << 24) #define LINFLEXD_UARTCR_OSR(uartcr) (((uartcr) \ & LINFLEXD_UARTCR_OSR_MASK) >> 24) #define LINFLEXD_UARTCR_ROSE BIT(23) #define LINFLEXD_UARTCR_RFBM BIT(9) #define LINFLEXD_UARTCR_TFBM BIT(8) #define LINFLEXD_UARTCR_WL1 BIT(7) #define LINFLEXD_UARTCR_PC1 BIT(6) #define LINFLEXD_UARTCR_RXEN BIT(5) #define LINFLEXD_UARTCR_TXEN BIT(4) #define LINFLEXD_UARTCR_PC0 BIT(3) #define LINFLEXD_UARTCR_PCE BIT(2) #define LINFLEXD_UARTCR_WL0 BIT(1) #define LINFLEXD_UARTCR_UART BIT(0) #define LINFLEXD_UARTSR_SZF BIT(15) #define LINFLEXD_UARTSR_OCF BIT(14) #define LINFLEXD_UARTSR_PE3 BIT(13) #define LINFLEXD_UARTSR_PE2 BIT(12) #define LINFLEXD_UARTSR_PE1 BIT(11) #define LINFLEXD_UARTSR_PE0 BIT(10) #define LINFLEXD_UARTSR_RMB BIT(9) #define LINFLEXD_UARTSR_FEF BIT(8) #define LINFLEXD_UARTSR_BOF BIT(7) #define LINFLEXD_UARTSR_RPS BIT(6) #define LINFLEXD_UARTSR_WUF BIT(5) #define LINFLEXD_UARTSR_4 BIT(4) #define LINFLEXD_UARTSR_TO BIT(3) #define LINFLEXD_UARTSR_DRFRFE BIT(2) #define LINFLEXD_UARTSR_DTFTFF BIT(1) #define LINFLEXD_UARTSR_NF BIT(0) #define LINFLEXD_UARTSR_PE (LINFLEXD_UARTSR_PE0 |\ LINFLEXD_UARTSR_PE1 |\ LINFLEXD_UARTSR_PE2 |\ LINFLEXD_UARTSR_PE3) #define LINFLEX_LDIV_MULTIPLIER (16) #define DRIVER_NAME "fsl-linflexuart" #define DEV_NAME "ttyLF" #define UART_NR 4 #define EARLYCON_BUFFER_INITIAL_CAP 8 #define PREINIT_DELAY 2000 /* us */ static const struct of_device_id linflex_dt_ids[] = { { .compatible = "fsl,s32v234-linflexuart", }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, linflex_dt_ids); #ifdef CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE static struct uart_port *earlycon_port; static bool linflex_earlycon_same_instance; static DEFINE_SPINLOCK(init_lock); static bool during_init; static struct { char *content; unsigned int len, cap; } earlycon_buf; #endif static void linflex_stop_tx(struct uart_port *port) { unsigned long ier; ier = readl(port->membase + LINIER); ier &= ~(LINFLEXD_LINIER_DTIE); writel(ier, port->membase + LINIER); } static void linflex_stop_rx(struct uart_port *port) { unsigned long ier; ier = readl(port->membase + LINIER); writel(ier & ~LINFLEXD_LINIER_DRIE, port->membase + LINIER); } static void linflex_put_char(struct uart_port *sport, unsigned char c) { unsigned long status; writeb(c, sport->membase + BDRL); /* Waiting for data transmission completed. */ while (((status = readl(sport->membase + UARTSR)) & LINFLEXD_UARTSR_DTFTFF) != LINFLEXD_UARTSR_DTFTFF) ; writel(status | LINFLEXD_UARTSR_DTFTFF, sport->membase + UARTSR); } static inline void linflex_transmit_buffer(struct uart_port *sport) { struct tty_port *tport = &sport->state->port; unsigned char c; while (uart_fifo_get(sport, &c)) { linflex_put_char(sport, c); sport->icount.tx++; } if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS) uart_write_wakeup(sport); if (kfifo_is_empty(&tport->xmit_fifo)) linflex_stop_tx(sport); } static void linflex_start_tx(struct uart_port *port) { unsigned long ier; linflex_transmit_buffer(port); ier = readl(port->membase + LINIER); writel(ier | LINFLEXD_LINIER_DTIE, port->membase + LINIER); } static irqreturn_t linflex_txint(int irq, void *dev_id) { struct uart_port *sport = dev_id; struct tty_port *tport = &sport->state->port; unsigned long flags; uart_port_lock_irqsave(sport, &flags); if (sport->x_char) { linflex_put_char(sport, sport->x_char); goto out; } if (kfifo_is_empty(&tport->xmit_fifo) || uart_tx_stopped(sport)) { linflex_stop_tx(sport); goto out; } linflex_transmit_buffer(sport); out: uart_port_unlock_irqrestore(sport, flags); return IRQ_HANDLED; } static irqreturn_t linflex_rxint(int irq, void *dev_id) { struct uart_port *sport = dev_id; unsigned int flg; struct tty_port *port = &sport->state->port; unsigned long flags, status; unsigned char rx; bool brk; uart_port_lock_irqsave(sport, &flags); status = readl(sport->membase + UARTSR); while (status & LINFLEXD_UARTSR_RMB) { rx = readb(sport->membase + BDRM); brk = false; flg = TTY_NORMAL; sport->icount.rx++; if (status & (LINFLEXD_UARTSR_BOF | LINFLEXD_UARTSR_FEF | LINFLEXD_UARTSR_PE)) { if (status & LINFLEXD_UARTSR_BOF) sport->icount.overrun++; if (status & LINFLEXD_UARTSR_FEF) { if (!rx) { brk = true; sport->icount.brk++; } else sport->icount.frame++; } if (status & LINFLEXD_UARTSR_PE) sport->icount.parity++; } writel(status, sport->membase + UARTSR); status = readl(sport->membase + UARTSR); if (brk) { uart_handle_break(sport); } else { if (uart_handle_sysrq_char(sport, (unsigned char)rx)) continue; tty_insert_flip_char(port, rx, flg); } } uart_port_unlock_irqrestore(sport, flags); tty_flip_buffer_push(port); return IRQ_HANDLED; } static irqreturn_t linflex_int(int irq, void *dev_id) { struct uart_port *sport = dev_id; unsigned long status; status = readl(sport->membase + UARTSR); if (status & LINFLEXD_UARTSR_DRFRFE) linflex_rxint(irq, dev_id); if (status & LINFLEXD_UARTSR_DTFTFF) linflex_txint(irq, dev_id); return IRQ_HANDLED; } /* return TIOCSER_TEMT when transmitter is not busy */ static unsigned int linflex_tx_empty(struct uart_port *port) { unsigned long status; status = readl(port->membase + UARTSR) & LINFLEXD_UARTSR_DTFTFF; return status ? TIOCSER_TEMT : 0; } static unsigned int linflex_get_mctrl(struct uart_port *port) { return 0; } static void linflex_set_mctrl(struct uart_port *port, unsigned int mctrl) { } static void linflex_break_ctl(struct uart_port *port, int break_state) { } static void linflex_setup_watermark(struct uart_port *sport) { unsigned long cr, ier, cr1; /* Disable transmission/reception */ ier = readl(sport->membase + LINIER); ier &= ~(LINFLEXD_LINIER_DRIE | LINFLEXD_LINIER_DTIE); writel(ier, sport->membase + LINIER); cr = readl(sport->membase + UARTCR); cr &= ~(LINFLEXD_UARTCR_RXEN | LINFLEXD_UARTCR_TXEN); writel(cr, sport->membase + UARTCR); /* Enter initialization mode by setting INIT bit */ /* set the Linflex in master mode and activate by-pass filter */ cr1 = LINFLEXD_LINCR1_BF | LINFLEXD_LINCR1_MME | LINFLEXD_LINCR1_INIT; writel(cr1, sport->membase + LINCR1); /* wait for init mode entry */ while ((readl(sport->membase + LINSR) & LINFLEXD_LINSR_LINS_MASK) != LINFLEXD_LINSR_LINS_INITMODE) ; /* * UART = 0x1; - Linflex working in UART mode * TXEN = 0x1; - Enable transmission of data now * RXEn = 0x1; - Receiver enabled * WL0 = 0x1; - 8 bit data * PCE = 0x0; - No parity */ /* set UART bit to allow writing other bits */ writel(LINFLEXD_UARTCR_UART, sport->membase + UARTCR); cr = (LINFLEXD_UARTCR_RXEN | LINFLEXD_UARTCR_TXEN | LINFLEXD_UARTCR_WL0 | LINFLEXD_UARTCR_UART); writel(cr, sport->membase + UARTCR); cr1 &= ~(LINFLEXD_LINCR1_INIT); writel(cr1, sport->membase + LINCR1); ier = readl(sport->membase + LINIER); ier |= LINFLEXD_LINIER_DRIE; ier |= LINFLEXD_LINIER_DTIE; writel(ier, sport->membase + LINIER); } static int linflex_startup(struct uart_port *port) { int ret = 0; unsigned long flags; uart_port_lock_irqsave(port, &flags); linflex_setup_watermark(port); uart_port_unlock_irqrestore(port, flags); ret = devm_request_irq(port->dev, port->irq, linflex_int, 0, DRIVER_NAME, port); return ret; } static void linflex_shutdown(struct uart_port *port) { unsigned long ier; unsigned long flags; uart_port_lock_irqsave(port, &flags); /* disable interrupts */ ier = readl(port->membase + LINIER); ier &= ~(LINFLEXD_LINIER_DRIE | LINFLEXD_LINIER_DTIE); writel(ier, port->membase + LINIER); uart_port_unlock_irqrestore(port, flags); devm_free_irq(port->dev, port->irq, port); } static void linflex_set_termios(struct uart_port *port, struct ktermios *termios, const struct ktermios *old) { unsigned long flags; unsigned long cr, old_cr, cr1; unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; cr = readl(port->membase + UARTCR); old_cr = cr; /* Enter initialization mode by setting INIT bit */ cr1 = readl(port->membase + LINCR1); cr1 |= LINFLEXD_LINCR1_INIT; writel(cr1, port->membase + LINCR1); /* wait for init mode entry */ while ((readl(port->membase + LINSR) & LINFLEXD_LINSR_LINS_MASK) != LINFLEXD_LINSR_LINS_INITMODE) ; /* * only support CS8 and CS7, and for CS7 must enable PE. * supported mode: * - (7,e/o,1) * - (8,n,1) * - (8,e/o,1) */ /* enter the UART into configuration mode */ while ((termios->c_cflag & CSIZE) != CS8 && (termios->c_cflag & CSIZE) != CS7) { termios->c_cflag &= ~CSIZE; termios->c_cflag |= old_csize; old_csize = CS8; } if ((termios->c_cflag & CSIZE) == CS7) { /* Word length: WL1WL0:00 */ cr = old_cr & ~LINFLEXD_UARTCR_WL1 & ~LINFLEXD_UARTCR_WL0; } if ((termios->c_cflag & CSIZE) == CS8) { /* Word length: WL1WL0:01 */ cr = (old_cr | LINFLEXD_UARTCR_WL0) & ~LINFLEXD_UARTCR_WL1; } if (termios->c_cflag & CMSPAR) { if ((termios->c_cflag & CSIZE) != CS8) { termios->c_cflag &= ~CSIZE; termios->c_cflag |= CS8; } /* has a space/sticky bit */ cr |= LINFLEXD_UARTCR_WL0; } if (termios->c_cflag & CSTOPB) termios->c_cflag &= ~CSTOPB; /* parity must be enabled when CS7 to match 8-bits format */ if ((termios->c_cflag & CSIZE) == CS7) termios->c_cflag |= PARENB; if ((termios->c_cflag & PARENB)) { cr |= LINFLEXD_UARTCR_PCE; if (termios->c_cflag & PARODD) cr = (cr | LINFLEXD_UARTCR_PC0) & (~LINFLEXD_UARTCR_PC1); else cr = cr & (~LINFLEXD_UARTCR_PC1 & ~LINFLEXD_UARTCR_PC0); } else { cr &= ~LINFLEXD_UARTCR_PCE; } uart_port_lock_irqsave(port, &flags); port->read_status_mask = 0; if (termios->c_iflag & INPCK) port->read_status_mask |= (LINFLEXD_UARTSR_FEF | LINFLEXD_UARTSR_PE0 | LINFLEXD_UARTSR_PE1 | LINFLEXD_UARTSR_PE2 | LINFLEXD_UARTSR_PE3); if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) port->read_status_mask |= LINFLEXD_UARTSR_FEF; /* characters to ignore */ port->ignore_status_mask = 0; if (termios->c_iflag & IGNPAR) port->ignore_status_mask |= LINFLEXD_UARTSR_PE; if (termios->c_iflag & IGNBRK) { port->ignore_status_mask |= LINFLEXD_UARTSR_PE; /* * if we're ignoring parity and break indicators, * ignore overruns too (for real raw support). */ if (termios->c_iflag & IGNPAR) port->ignore_status_mask |= LINFLEXD_UARTSR_BOF; } writel(cr, port->membase + UARTCR); cr1 &= ~(LINFLEXD_LINCR1_INIT); writel(cr1, port->membase + LINCR1); uart_port_unlock_irqrestore(port, flags); } static const char *linflex_type(struct uart_port *port) { return "FSL_LINFLEX"; } static void linflex_release_port(struct uart_port *port) { /* nothing to do */ } static int linflex_request_port(struct uart_port *port) { return 0; } /* configure/auto-configure the port */ static void linflex_config_port(struct uart_port *port, int flags) { if (flags & UART_CONFIG_TYPE) port->type = PORT_LINFLEXUART; } static const struct uart_ops linflex_pops = { .tx_empty = linflex_tx_empty, .set_mctrl = linflex_set_mctrl, .get_mctrl = linflex_get_mctrl, .stop_tx = linflex_stop_tx, .start_tx = linflex_start_tx, .stop_rx = linflex_stop_rx, .break_ctl = linflex_break_ctl, .startup = linflex_startup, .shutdown = linflex_shutdown, .set_termios = linflex_set_termios, .type = linflex_type, .request_port = linflex_request_port, .release_port = linflex_release_port, .config_port = linflex_config_port, }; static struct uart_port *linflex_ports[UART_NR]; #ifdef CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE static void linflex_console_putchar(struct uart_port *port, unsigned char ch) { unsigned long cr; cr = readl(port->membase + UARTCR); writeb(ch, port->membase + BDRL); if (!(cr & LINFLEXD_UARTCR_TFBM)) while ((readl(port->membase + UARTSR) & LINFLEXD_UARTSR_DTFTFF) != LINFLEXD_UARTSR_DTFTFF) ; else while (readl(port->membase + UARTSR) & LINFLEXD_UARTSR_DTFTFF) ; if (!(cr & LINFLEXD_UARTCR_TFBM)) { writel((readl(port->membase + UARTSR) | LINFLEXD_UARTSR_DTFTFF), port->membase + UARTSR); } } static void linflex_earlycon_putchar(struct uart_port *port, unsigned char ch) { unsigned long flags; char *ret; if (!linflex_earlycon_same_instance) { linflex_console_putchar(port, ch); return; } spin_lock_irqsave(&init_lock, flags); if (!during_init) goto outside_init; if (earlycon_buf.len >= 1 << CONFIG_LOG_BUF_SHIFT) goto init_release; if (!earlycon_buf.cap) { earlycon_buf.content = kmalloc(EARLYCON_BUFFER_INITIAL_CAP, GFP_ATOMIC); earlycon_buf.cap = earlycon_buf.content ? EARLYCON_BUFFER_INITIAL_CAP : 0; } else if (earlycon_buf.len == earlycon_buf.cap) { ret = krealloc(earlycon_buf.content, earlycon_buf.cap << 1, GFP_ATOMIC); if (ret) { earlycon_buf.content = ret; earlycon_buf.cap <<= 1; } } if (earlycon_buf.len < earlycon_buf.cap) earlycon_buf.content[earlycon_buf.len++] = ch; goto init_release; outside_init: linflex_console_putchar(port, ch); init_release: spin_unlock_irqrestore(&init_lock, flags); } static void linflex_string_write(struct uart_port *sport, const char *s, unsigned int count) { unsigned long cr, ier = 0; ier = readl(sport->membase + LINIER); linflex_stop_tx(sport); cr = readl(sport->membase + UARTCR); cr |= (LINFLEXD_UARTCR_TXEN); writel(cr, sport->membase + UARTCR); uart_console_write(sport, s, count, linflex_console_putchar); writel(ier, sport->membase + LINIER); } static void linflex_console_write(struct console *co, const char *s, unsigned int count) { struct uart_port *sport = linflex_ports[co->index]; unsigned long flags; int locked = 1; if (sport->sysrq) locked = 0; else if (oops_in_progress) locked = uart_port_trylock_irqsave(sport, &flags); else uart_port_lock_irqsave(sport, &flags); linflex_string_write(sport, s, count); if (locked) uart_port_unlock_irqrestore(sport, flags); } /* * if the port was already initialised (eg, by a boot loader), * try to determine the current setup. */ static void __init linflex_console_get_options(struct uart_port *sport, int *parity, int *bits) { unsigned long cr; cr = readl(sport->membase + UARTCR); cr &= LINFLEXD_UARTCR_RXEN | LINFLEXD_UARTCR_TXEN; if (!cr) return; /* ok, the port was enabled */ *parity = 'n'; if (cr & LINFLEXD_UARTCR_PCE) { if (cr & LINFLEXD_UARTCR_PC0) *parity = 'o'; else *parity = 'e'; } if ((cr & LINFLEXD_UARTCR_WL0) && ((cr & LINFLEXD_UARTCR_WL1) == 0)) { if (cr & LINFLEXD_UARTCR_PCE) *bits = 9; else *bits = 8; } } static int __init linflex_console_setup(struct console *co, char *options) { struct uart_port *sport; int baud = 115200; int bits = 8; int parity = 'n'; int flow = 'n'; int ret; int i; unsigned long flags; /* * check whether an invalid uart number has been specified, and * if so, search for the first available port that does have * console support. */ if (co->index == -1 || co->index >= ARRAY_SIZE(linflex_ports)) co->index = 0; sport = linflex_ports[co->index]; if (!sport) return -ENODEV; if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); else linflex_console_get_options(sport, &parity, &bits); if (earlycon_port && sport->mapbase == earlycon_port->mapbase) { linflex_earlycon_same_instance = true; spin_lock_irqsave(&init_lock, flags); during_init = true; spin_unlock_irqrestore(&init_lock, flags); /* Workaround for character loss or output of many invalid * characters, when INIT mode is entered shortly after a * character has just been printed. */ udelay(PREINIT_DELAY); } linflex_setup_watermark(sport); ret = uart_set_options(sport, co, baud, parity, bits, flow); if (!linflex_earlycon_same_instance) goto done; spin_lock_irqsave(&init_lock, flags); /* Emptying buffer */ if (earlycon_buf.len) { for (i = 0; i < earlycon_buf.len; i++) linflex_console_putchar(earlycon_port, earlycon_buf.content[i]); kfree(earlycon_buf.content); earlycon_buf.len = 0; } during_init = false; spin_unlock_irqrestore(&init_lock, flags); done: return ret; } static struct uart_driver linflex_reg; static struct console linflex_console = { .name = DEV_NAME, .write = linflex_console_write, .device = uart_console_device, .setup = linflex_console_setup, .flags = CON_PRINTBUFFER, .index = -1, .data = &linflex_reg, }; static void linflex_earlycon_write(struct console *con, const char *s, unsigned int n) { struct earlycon_device *dev = con->data; uart_console_write(&dev->port, s, n, linflex_earlycon_putchar); } static int __init linflex_early_console_setup(struct earlycon_device *device, const char *options) { if (!device->port.membase) return -ENODEV; device->con->write = linflex_earlycon_write; earlycon_port = &device->port; return 0; } OF_EARLYCON_DECLARE(linflex, "fsl,s32v234-linflexuart", linflex_early_console_setup); #define LINFLEX_CONSOLE (&linflex_console) #else #define LINFLEX_CONSOLE NULL #endif static struct uart_driver linflex_reg = { .owner = THIS_MODULE, .driver_name = DRIVER_NAME, .dev_name = DEV_NAME, .nr = ARRAY_SIZE(linflex_ports), .cons = LINFLEX_CONSOLE, }; static int linflex_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; struct uart_port *sport; struct resource *res; int ret; sport = devm_kzalloc(&pdev->dev, sizeof(*sport), GFP_KERNEL); if (!sport) return -ENOMEM; ret = of_alias_get_id(np, "serial"); if (ret < 0) { dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret); return ret; } if (ret >= UART_NR) { dev_err(&pdev->dev, "driver limited to %d serial ports\n", UART_NR); return -ENOMEM; } sport->line = ret; sport->membase = devm_platform_get_and_ioremap_resource(pdev, 0, &res); if (IS_ERR(sport->membase)) return PTR_ERR(sport->membase); sport->mapbase = res->start; ret = platform_get_irq(pdev, 0); if (ret < 0) return ret; sport->dev = &pdev->dev; sport->iotype = UPIO_MEM; sport->irq = ret; sport->ops = &linflex_pops; sport->flags = UPF_BOOT_AUTOCONF; sport->has_sysrq = IS_ENABLED(CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE); linflex_ports[sport->line] = sport; platform_set_drvdata(pdev, sport); return uart_add_one_port(&linflex_reg, sport); } static void linflex_remove(struct platform_device *pdev) { struct uart_port *sport = platform_get_drvdata(pdev); uart_remove_one_port(&linflex_reg, sport); } #ifdef CONFIG_PM_SLEEP static int linflex_suspend(struct device *dev) { struct uart_port *sport = dev_get_drvdata(dev); uart_suspend_port(&linflex_reg, sport); return 0; } static int linflex_resume(struct device *dev) { struct uart_port *sport = dev_get_drvdata(dev); uart_resume_port(&linflex_reg, sport); return 0; } #endif static SIMPLE_DEV_PM_OPS(linflex_pm_ops, linflex_suspend, linflex_resume); static struct platform_driver linflex_driver = { .probe = linflex_probe, .remove = linflex_remove, .driver = { .name = DRIVER_NAME, .of_match_table = linflex_dt_ids, .pm = &linflex_pm_ops, }, }; static int __init linflex_serial_init(void) { int ret; ret = uart_register_driver(&linflex_reg); if (ret) return ret; ret = platform_driver_register(&linflex_driver); if (ret) uart_unregister_driver(&linflex_reg); return ret; } static void __exit linflex_serial_exit(void) { platform_driver_unregister(&linflex_driver); uart_unregister_driver(&linflex_reg); } module_init(linflex_serial_init); module_exit(linflex_serial_exit); MODULE_DESCRIPTION("Freescale LINFlexD serial port driver"); MODULE_LICENSE("GPL v2");