// SPDX-License-Identifier: GPL-2.0 // Copyright (C) 2023 FUJITA Tomonori //! Network PHY device. //! //! C headers: [`include/linux/phy.h`](srctree/include/linux/phy.h). use crate::{error::*, prelude::*, types::Opaque}; use core::{marker::PhantomData, ptr::addr_of_mut}; pub mod reg; /// PHY state machine states. /// /// Corresponds to the kernel's [`enum phy_state`]. /// /// Some of PHY drivers access to the state of PHY's software state machine. /// /// [`enum phy_state`]: srctree/include/linux/phy.h #[derive(PartialEq, Eq)] pub enum DeviceState { /// PHY device and driver are not ready for anything. Down, /// PHY is ready to send and receive packets. Ready, /// PHY is up, but no polling or interrupts are done. Halted, /// PHY is up, but is in an error state. Error, /// PHY and attached device are ready to do work. Up, /// PHY is currently running. Running, /// PHY is up, but not currently plugged in. NoLink, /// PHY is performing a cable test. CableTest, } /// A mode of Ethernet communication. /// /// PHY drivers get duplex information from hardware and update the current state. pub enum DuplexMode { /// PHY is in full-duplex mode. Full, /// PHY is in half-duplex mode. Half, /// PHY is in unknown duplex mode. Unknown, } /// An instance of a PHY device. /// /// Wraps the kernel's [`struct phy_device`]. /// /// A [`Device`] instance is created when a callback in [`Driver`] is executed. A PHY driver /// executes [`Driver`]'s methods during the callback. /// /// # Invariants /// /// - Referencing a `phy_device` using this struct asserts that you are in /// a context where all methods defined on this struct are safe to call. /// - This struct always has a valid `self.0.mdio.dev`. /// /// [`struct phy_device`]: srctree/include/linux/phy.h // During the calls to most functions in [`Driver`], the C side (`PHYLIB`) holds a lock that is // unique for every instance of [`Device`]. `PHYLIB` uses a different serialization technique for // [`Driver::resume`] and [`Driver::suspend`]: `PHYLIB` updates `phy_device`'s state with // the lock held, thus guaranteeing that [`Driver::resume`] has exclusive access to the instance. // [`Driver::resume`] and [`Driver::suspend`] also are called where only one thread can access // to the instance. #[repr(transparent)] pub struct Device(Opaque); impl Device { /// Creates a new [`Device`] instance from a raw pointer. /// /// # Safety /// /// For the duration of `'a`, /// - the pointer must point at a valid `phy_device`, and the caller /// must be in a context where all methods defined on this struct /// are safe to call. /// - `(*ptr).mdio.dev` must be a valid. unsafe fn from_raw<'a>(ptr: *mut bindings::phy_device) -> &'a mut Self { // CAST: `Self` is a `repr(transparent)` wrapper around `bindings::phy_device`. let ptr = ptr.cast::(); // SAFETY: by the function requirements the pointer is valid and we have unique access for // the duration of `'a`. unsafe { &mut *ptr } } /// Gets the id of the PHY. pub fn phy_id(&self) -> u32 { let phydev = self.0.get(); // SAFETY: The struct invariant ensures that we may access // this field without additional synchronization. unsafe { (*phydev).phy_id } } /// Gets the state of PHY state machine states. pub fn state(&self) -> DeviceState { let phydev = self.0.get(); // SAFETY: The struct invariant ensures that we may access // this field without additional synchronization. let state = unsafe { (*phydev).state }; // TODO: this conversion code will be replaced with automatically generated code by bindgen // when it becomes possible. match state { bindings::phy_state_PHY_DOWN => DeviceState::Down, bindings::phy_state_PHY_READY => DeviceState::Ready, bindings::phy_state_PHY_HALTED => DeviceState::Halted, bindings::phy_state_PHY_ERROR => DeviceState::Error, bindings::phy_state_PHY_UP => DeviceState::Up, bindings::phy_state_PHY_RUNNING => DeviceState::Running, bindings::phy_state_PHY_NOLINK => DeviceState::NoLink, bindings::phy_state_PHY_CABLETEST => DeviceState::CableTest, _ => DeviceState::Error, } } /// Gets the current link state. /// /// It returns true if the link is up. pub fn is_link_up(&self) -> bool { const LINK_IS_UP: u64 = 1; // TODO: the code to access to the bit field will be replaced with automatically // generated code by bindgen when it becomes possible. // SAFETY: The struct invariant ensures that we may access // this field without additional synchronization. let bit_field = unsafe { &(*self.0.get())._bitfield_1 }; bit_field.get(14, 1) == LINK_IS_UP } /// Gets the current auto-negotiation configuration. /// /// It returns true if auto-negotiation is enabled. pub fn is_autoneg_enabled(&self) -> bool { // TODO: the code to access to the bit field will be replaced with automatically // generated code by bindgen when it becomes possible. // SAFETY: The struct invariant ensures that we may access // this field without additional synchronization. let bit_field = unsafe { &(*self.0.get())._bitfield_1 }; bit_field.get(13, 1) == bindings::AUTONEG_ENABLE as u64 } /// Gets the current auto-negotiation state. /// /// It returns true if auto-negotiation is completed. pub fn is_autoneg_completed(&self) -> bool { const AUTONEG_COMPLETED: u64 = 1; // TODO: the code to access to the bit field will be replaced with automatically // generated code by bindgen when it becomes possible. // SAFETY: The struct invariant ensures that we may access // this field without additional synchronization. let bit_field = unsafe { &(*self.0.get())._bitfield_1 }; bit_field.get(15, 1) == AUTONEG_COMPLETED } /// Sets the speed of the PHY. pub fn set_speed(&mut self, speed: u32) { let phydev = self.0.get(); // SAFETY: The struct invariant ensures that we may access // this field without additional synchronization. unsafe { (*phydev).speed = speed as i32 }; } /// Sets duplex mode. pub fn set_duplex(&mut self, mode: DuplexMode) { let phydev = self.0.get(); let v = match mode { DuplexMode::Full => bindings::DUPLEX_FULL as i32, DuplexMode::Half => bindings::DUPLEX_HALF as i32, DuplexMode::Unknown => bindings::DUPLEX_UNKNOWN as i32, }; // SAFETY: The struct invariant ensures that we may access // this field without additional synchronization. unsafe { (*phydev).duplex = v }; } /// Reads a PHY register. // This function reads a hardware register and updates the stats so takes `&mut self`. pub fn read(&mut self, reg: R) -> Result { reg.read(self) } /// Writes a PHY register. pub fn write(&mut self, reg: R, val: u16) -> Result { reg.write(self, val) } /// Reads a paged register. pub fn read_paged(&mut self, page: u16, regnum: u16) -> Result { let phydev = self.0.get(); // SAFETY: `phydev` is pointing to a valid object by the type invariant of `Self`. // So it's just an FFI call. let ret = unsafe { bindings::phy_read_paged(phydev, page.into(), regnum.into()) }; if ret < 0 { Err(Error::from_errno(ret)) } else { Ok(ret as u16) } } /// Resolves the advertisements into PHY settings. pub fn resolve_aneg_linkmode(&mut self) { let phydev = self.0.get(); // SAFETY: `phydev` is pointing to a valid object by the type invariant of `Self`. // So it's just an FFI call. unsafe { bindings::phy_resolve_aneg_linkmode(phydev) }; } /// Executes software reset the PHY via `BMCR_RESET` bit. pub fn genphy_soft_reset(&mut self) -> Result { let phydev = self.0.get(); // SAFETY: `phydev` is pointing to a valid object by the type invariant of `Self`. // So it's just an FFI call. to_result(unsafe { bindings::genphy_soft_reset(phydev) }) } /// Initializes the PHY. pub fn init_hw(&mut self) -> Result { let phydev = self.0.get(); // SAFETY: `phydev` is pointing to a valid object by the type invariant of `Self`. // So it's just an FFI call. to_result(unsafe { bindings::phy_init_hw(phydev) }) } /// Starts auto-negotiation. pub fn start_aneg(&mut self) -> Result { let phydev = self.0.get(); // SAFETY: `phydev` is pointing to a valid object by the type invariant of `Self`. // So it's just an FFI call. to_result(unsafe { bindings::_phy_start_aneg(phydev) }) } /// Resumes the PHY via `BMCR_PDOWN` bit. pub fn genphy_resume(&mut self) -> Result { let phydev = self.0.get(); // SAFETY: `phydev` is pointing to a valid object by the type invariant of `Self`. // So it's just an FFI call. to_result(unsafe { bindings::genphy_resume(phydev) }) } /// Suspends the PHY via `BMCR_PDOWN` bit. pub fn genphy_suspend(&mut self) -> Result { let phydev = self.0.get(); // SAFETY: `phydev` is pointing to a valid object by the type invariant of `Self`. // So it's just an FFI call. to_result(unsafe { bindings::genphy_suspend(phydev) }) } /// Checks the link status and updates current link state. pub fn genphy_read_status(&mut self) -> Result { R::read_status(self) } /// Updates the link status. pub fn genphy_update_link(&mut self) -> Result { let phydev = self.0.get(); // SAFETY: `phydev` is pointing to a valid object by the type invariant of `Self`. // So it's just an FFI call. to_result(unsafe { bindings::genphy_update_link(phydev) }) } /// Reads link partner ability. pub fn genphy_read_lpa(&mut self) -> Result { let phydev = self.0.get(); // SAFETY: `phydev` is pointing to a valid object by the type invariant of `Self`. // So it's just an FFI call. to_result(unsafe { bindings::genphy_read_lpa(phydev) }) } /// Reads PHY abilities. pub fn genphy_read_abilities(&mut self) -> Result { let phydev = self.0.get(); // SAFETY: `phydev` is pointing to a valid object by the type invariant of `Self`. // So it's just an FFI call. to_result(unsafe { bindings::genphy_read_abilities(phydev) }) } } impl AsRef for Device { fn as_ref(&self) -> &kernel::device::Device { let phydev = self.0.get(); // SAFETY: The struct invariant ensures that `mdio.dev` is valid. unsafe { kernel::device::Device::as_ref(addr_of_mut!((*phydev).mdio.dev)) } } } /// Defines certain other features this PHY supports (like interrupts). /// /// These flag values are used in [`Driver::FLAGS`]. pub mod flags { /// PHY is internal. pub const IS_INTERNAL: u32 = bindings::PHY_IS_INTERNAL; /// PHY needs to be reset after the refclk is enabled. pub const RST_AFTER_CLK_EN: u32 = bindings::PHY_RST_AFTER_CLK_EN; /// Polling is used to detect PHY status changes. pub const POLL_CABLE_TEST: u32 = bindings::PHY_POLL_CABLE_TEST; /// Don't suspend. pub const ALWAYS_CALL_SUSPEND: u32 = bindings::PHY_ALWAYS_CALL_SUSPEND; } /// An adapter for the registration of a PHY driver. struct Adapter { _p: PhantomData, } impl Adapter { /// # Safety /// /// `phydev` must be passed by the corresponding callback in `phy_driver`. unsafe extern "C" fn soft_reset_callback( phydev: *mut bindings::phy_device, ) -> crate::ffi::c_int { from_result(|| { // SAFETY: This callback is called only in contexts // where we hold `phy_device->lock`, so the accessors on // `Device` are okay to call. let dev = unsafe { Device::from_raw(phydev) }; T::soft_reset(dev)?; Ok(0) }) } /// # Safety /// /// `phydev` must be passed by the corresponding callback in `phy_driver`. unsafe extern "C" fn probe_callback(phydev: *mut bindings::phy_device) -> crate::ffi::c_int { from_result(|| { // SAFETY: This callback is called only in contexts // where we can exclusively access `phy_device` because // it's not published yet, so the accessors on `Device` are okay // to call. let dev = unsafe { Device::from_raw(phydev) }; T::probe(dev)?; Ok(0) }) } /// # Safety /// /// `phydev` must be passed by the corresponding callback in `phy_driver`. unsafe extern "C" fn get_features_callback( phydev: *mut bindings::phy_device, ) -> crate::ffi::c_int { from_result(|| { // SAFETY: This callback is called only in contexts // where we hold `phy_device->lock`, so the accessors on // `Device` are okay to call. let dev = unsafe { Device::from_raw(phydev) }; T::get_features(dev)?; Ok(0) }) } /// # Safety /// /// `phydev` must be passed by the corresponding callback in `phy_driver`. unsafe extern "C" fn suspend_callback(phydev: *mut bindings::phy_device) -> crate::ffi::c_int { from_result(|| { // SAFETY: The C core code ensures that the accessors on // `Device` are okay to call even though `phy_device->lock` // might not be held. let dev = unsafe { Device::from_raw(phydev) }; T::suspend(dev)?; Ok(0) }) } /// # Safety /// /// `phydev` must be passed by the corresponding callback in `phy_driver`. unsafe extern "C" fn resume_callback(phydev: *mut bindings::phy_device) -> crate::ffi::c_int { from_result(|| { // SAFETY: The C core code ensures that the accessors on // `Device` are okay to call even though `phy_device->lock` // might not be held. let dev = unsafe { Device::from_raw(phydev) }; T::resume(dev)?; Ok(0) }) } /// # Safety /// /// `phydev` must be passed by the corresponding callback in `phy_driver`. unsafe extern "C" fn config_aneg_callback( phydev: *mut bindings::phy_device, ) -> crate::ffi::c_int { from_result(|| { // SAFETY: This callback is called only in contexts // where we hold `phy_device->lock`, so the accessors on // `Device` are okay to call. let dev = unsafe { Device::from_raw(phydev) }; T::config_aneg(dev)?; Ok(0) }) } /// # Safety /// /// `phydev` must be passed by the corresponding callback in `phy_driver`. unsafe extern "C" fn read_status_callback( phydev: *mut bindings::phy_device, ) -> crate::ffi::c_int { from_result(|| { // SAFETY: This callback is called only in contexts // where we hold `phy_device->lock`, so the accessors on // `Device` are okay to call. let dev = unsafe { Device::from_raw(phydev) }; T::read_status(dev)?; Ok(0) }) } /// # Safety /// /// `phydev` must be passed by the corresponding callback in `phy_driver`. unsafe extern "C" fn match_phy_device_callback( phydev: *mut bindings::phy_device, ) -> crate::ffi::c_int { // SAFETY: This callback is called only in contexts // where we hold `phy_device->lock`, so the accessors on // `Device` are okay to call. let dev = unsafe { Device::from_raw(phydev) }; T::match_phy_device(dev) as i32 } /// # Safety /// /// `phydev` must be passed by the corresponding callback in `phy_driver`. unsafe extern "C" fn read_mmd_callback( phydev: *mut bindings::phy_device, devnum: i32, regnum: u16, ) -> i32 { from_result(|| { // SAFETY: This callback is called only in contexts // where we hold `phy_device->lock`, so the accessors on // `Device` are okay to call. let dev = unsafe { Device::from_raw(phydev) }; // CAST: the C side verifies devnum < 32. let ret = T::read_mmd(dev, devnum as u8, regnum)?; Ok(ret.into()) }) } /// # Safety /// /// `phydev` must be passed by the corresponding callback in `phy_driver`. unsafe extern "C" fn write_mmd_callback( phydev: *mut bindings::phy_device, devnum: i32, regnum: u16, val: u16, ) -> i32 { from_result(|| { // SAFETY: This callback is called only in contexts // where we hold `phy_device->lock`, so the accessors on // `Device` are okay to call. let dev = unsafe { Device::from_raw(phydev) }; T::write_mmd(dev, devnum as u8, regnum, val)?; Ok(0) }) } /// # Safety /// /// `phydev` must be passed by the corresponding callback in `phy_driver`. unsafe extern "C" fn link_change_notify_callback(phydev: *mut bindings::phy_device) { // SAFETY: This callback is called only in contexts // where we hold `phy_device->lock`, so the accessors on // `Device` are okay to call. let dev = unsafe { Device::from_raw(phydev) }; T::link_change_notify(dev); } } /// Driver structure for a particular PHY type. /// /// Wraps the kernel's [`struct phy_driver`]. /// This is used to register a driver for a particular PHY type with the kernel. /// /// # Invariants /// /// `self.0` is always in a valid state. /// /// [`struct phy_driver`]: srctree/include/linux/phy.h #[repr(transparent)] pub struct DriverVTable(Opaque); // SAFETY: `DriverVTable` doesn't expose any &self method to access internal data, so it's safe to // share `&DriverVTable` across execution context boundaries. unsafe impl Sync for DriverVTable {} /// Creates a [`DriverVTable`] instance from [`Driver`]. /// /// This is used by [`module_phy_driver`] macro to create a static array of `phy_driver`. /// /// [`module_phy_driver`]: crate::module_phy_driver pub const fn create_phy_driver() -> DriverVTable { // INVARIANT: All the fields of `struct phy_driver` are initialized properly. DriverVTable(Opaque::new(bindings::phy_driver { name: T::NAME.as_char_ptr().cast_mut(), flags: T::FLAGS, phy_id: T::PHY_DEVICE_ID.id, phy_id_mask: T::PHY_DEVICE_ID.mask_as_int(), soft_reset: if T::HAS_SOFT_RESET { Some(Adapter::::soft_reset_callback) } else { None }, probe: if T::HAS_PROBE { Some(Adapter::::probe_callback) } else { None }, get_features: if T::HAS_GET_FEATURES { Some(Adapter::::get_features_callback) } else { None }, match_phy_device: if T::HAS_MATCH_PHY_DEVICE { Some(Adapter::::match_phy_device_callback) } else { None }, suspend: if T::HAS_SUSPEND { Some(Adapter::::suspend_callback) } else { None }, resume: if T::HAS_RESUME { Some(Adapter::::resume_callback) } else { None }, config_aneg: if T::HAS_CONFIG_ANEG { Some(Adapter::::config_aneg_callback) } else { None }, read_status: if T::HAS_READ_STATUS { Some(Adapter::::read_status_callback) } else { None }, read_mmd: if T::HAS_READ_MMD { Some(Adapter::::read_mmd_callback) } else { None }, write_mmd: if T::HAS_WRITE_MMD { Some(Adapter::::write_mmd_callback) } else { None }, link_change_notify: if T::HAS_LINK_CHANGE_NOTIFY { Some(Adapter::::link_change_notify_callback) } else { None }, // SAFETY: The rest is zeroed out to initialize `struct phy_driver`, // sets `Option<&F>` to be `None`. ..unsafe { core::mem::MaybeUninit::::zeroed().assume_init() } })) } /// Driver implementation for a particular PHY type. /// /// This trait is used to create a [`DriverVTable`]. #[vtable] pub trait Driver { /// Defines certain other features this PHY supports. /// It is a combination of the flags in the [`flags`] module. const FLAGS: u32 = 0; /// The friendly name of this PHY type. const NAME: &'static CStr; /// This driver only works for PHYs with IDs which match this field. /// The default id and mask are zero. const PHY_DEVICE_ID: DeviceId = DeviceId::new_with_custom_mask(0, 0); /// Issues a PHY software reset. fn soft_reset(_dev: &mut Device) -> Result { kernel::build_error(VTABLE_DEFAULT_ERROR) } /// Sets up device-specific structures during discovery. fn probe(_dev: &mut Device) -> Result { kernel::build_error(VTABLE_DEFAULT_ERROR) } /// Probes the hardware to determine what abilities it has. fn get_features(_dev: &mut Device) -> Result { kernel::build_error(VTABLE_DEFAULT_ERROR) } /// Returns true if this is a suitable driver for the given phydev. /// If not implemented, matching is based on [`Driver::PHY_DEVICE_ID`]. fn match_phy_device(_dev: &Device) -> bool { false } /// Configures the advertisement and resets auto-negotiation /// if auto-negotiation is enabled. fn config_aneg(_dev: &mut Device) -> Result { kernel::build_error(VTABLE_DEFAULT_ERROR) } /// Determines the negotiated speed and duplex. fn read_status(_dev: &mut Device) -> Result { kernel::build_error(VTABLE_DEFAULT_ERROR) } /// Suspends the hardware, saving state if needed. fn suspend(_dev: &mut Device) -> Result { kernel::build_error(VTABLE_DEFAULT_ERROR) } /// Resumes the hardware, restoring state if needed. fn resume(_dev: &mut Device) -> Result { kernel::build_error(VTABLE_DEFAULT_ERROR) } /// Overrides the default MMD read function for reading a MMD register. fn read_mmd(_dev: &mut Device, _devnum: u8, _regnum: u16) -> Result { kernel::build_error(VTABLE_DEFAULT_ERROR) } /// Overrides the default MMD write function for writing a MMD register. fn write_mmd(_dev: &mut Device, _devnum: u8, _regnum: u16, _val: u16) -> Result { kernel::build_error(VTABLE_DEFAULT_ERROR) } /// Callback for notification of link change. fn link_change_notify(_dev: &mut Device) {} } /// Registration structure for PHY drivers. /// /// Registers [`DriverVTable`] instances with the kernel. They will be unregistered when dropped. /// /// # Invariants /// /// The `drivers` slice are currently registered to the kernel via `phy_drivers_register`. pub struct Registration { drivers: Pin<&'static mut [DriverVTable]>, } // SAFETY: The only action allowed in a `Registration` instance is dropping it, which is safe to do // from any thread because `phy_drivers_unregister` can be called from any thread context. unsafe impl Send for Registration {} impl Registration { /// Registers a PHY driver. pub fn register( module: &'static crate::ThisModule, drivers: Pin<&'static mut [DriverVTable]>, ) -> Result { if drivers.is_empty() { return Err(code::EINVAL); } // SAFETY: The type invariants of [`DriverVTable`] ensure that all elements of // the `drivers` slice are initialized properly. `drivers` will not be moved. // So it's just an FFI call. to_result(unsafe { bindings::phy_drivers_register(drivers[0].0.get(), drivers.len().try_into()?, module.0) })?; // INVARIANT: The `drivers` slice is successfully registered to the kernel via `phy_drivers_register`. Ok(Registration { drivers }) } } impl Drop for Registration { fn drop(&mut self) { // SAFETY: The type invariants guarantee that `self.drivers` is valid. // So it's just an FFI call. unsafe { bindings::phy_drivers_unregister(self.drivers[0].0.get(), self.drivers.len() as i32) }; } } /// An identifier for PHY devices on an MDIO/MII bus. /// /// Represents the kernel's `struct mdio_device_id`. This is used to find an appropriate /// PHY driver. pub struct DeviceId { id: u32, mask: DeviceMask, } impl DeviceId { /// Creates a new instance with the exact match mask. pub const fn new_with_exact_mask(id: u32) -> Self { DeviceId { id, mask: DeviceMask::Exact, } } /// Creates a new instance with the model match mask. pub const fn new_with_model_mask(id: u32) -> Self { DeviceId { id, mask: DeviceMask::Model, } } /// Creates a new instance with the vendor match mask. pub const fn new_with_vendor_mask(id: u32) -> Self { DeviceId { id, mask: DeviceMask::Vendor, } } /// Creates a new instance with a custom match mask. pub const fn new_with_custom_mask(id: u32, mask: u32) -> Self { DeviceId { id, mask: DeviceMask::Custom(mask), } } /// Creates a new instance from [`Driver`]. pub const fn new_with_driver() -> Self { T::PHY_DEVICE_ID } /// Get a `mask` as u32. pub const fn mask_as_int(&self) -> u32 { self.mask.as_int() } // macro use only #[doc(hidden)] pub const fn mdio_device_id(&self) -> bindings::mdio_device_id { bindings::mdio_device_id { phy_id: self.id, phy_id_mask: self.mask.as_int(), } } } enum DeviceMask { Exact, Model, Vendor, Custom(u32), } impl DeviceMask { const MASK_EXACT: u32 = !0; const MASK_MODEL: u32 = !0 << 4; const MASK_VENDOR: u32 = !0 << 10; const fn as_int(&self) -> u32 { match self { DeviceMask::Exact => Self::MASK_EXACT, DeviceMask::Model => Self::MASK_MODEL, DeviceMask::Vendor => Self::MASK_VENDOR, DeviceMask::Custom(mask) => *mask, } } } /// Declares a kernel module for PHYs drivers. /// /// This creates a static array of kernel's `struct phy_driver` and registers it. /// This also corresponds to the kernel's `MODULE_DEVICE_TABLE` macro, which embeds the information /// for module loading into the module binary file. Every driver needs an entry in `device_table`. /// /// # Examples /// /// ``` /// # mod module_phy_driver_sample { /// use kernel::c_str; /// use kernel::net::phy::{self, DeviceId}; /// use kernel::prelude::*; /// /// kernel::module_phy_driver! { /// drivers: [PhySample], /// device_table: [ /// DeviceId::new_with_driver::() /// ], /// name: "rust_sample_phy", /// author: "Rust for Linux Contributors", /// description: "Rust sample PHYs driver", /// license: "GPL", /// } /// /// struct PhySample; /// /// #[vtable] /// impl phy::Driver for PhySample { /// const NAME: &'static CStr = c_str!("PhySample"); /// const PHY_DEVICE_ID: phy::DeviceId = phy::DeviceId::new_with_exact_mask(0x00000001); /// } /// # } /// ``` /// /// This expands to the following code: /// /// ```ignore /// use kernel::c_str; /// use kernel::net::phy::{self, DeviceId}; /// use kernel::prelude::*; /// /// struct Module { /// _reg: ::kernel::net::phy::Registration, /// } /// /// module! { /// type: Module, /// name: "rust_sample_phy", /// author: "Rust for Linux Contributors", /// description: "Rust sample PHYs driver", /// license: "GPL", /// } /// /// struct PhySample; /// /// #[vtable] /// impl phy::Driver for PhySample { /// const NAME: &'static CStr = c_str!("PhySample"); /// const PHY_DEVICE_ID: phy::DeviceId = phy::DeviceId::new_with_exact_mask(0x00000001); /// } /// /// const _: () = { /// static mut DRIVERS: [::kernel::net::phy::DriverVTable; 1] = /// [::kernel::net::phy::create_phy_driver::()]; /// /// impl ::kernel::Module for Module { /// fn init(module: &'static ::kernel::ThisModule) -> Result { /// let drivers = unsafe { &mut DRIVERS }; /// let mut reg = ::kernel::net::phy::Registration::register( /// module, /// ::core::pin::Pin::static_mut(drivers), /// )?; /// Ok(Module { _reg: reg }) /// } /// } /// }; /// /// const _DEVICE_TABLE: [::kernel::bindings::mdio_device_id; 2] = [ /// ::kernel::bindings::mdio_device_id { /// phy_id: 0x00000001, /// phy_id_mask: 0xffffffff, /// }, /// ::kernel::bindings::mdio_device_id { /// phy_id: 0, /// phy_id_mask: 0, /// }, /// ]; /// #[cfg(MODULE)] /// #[no_mangle] /// static __mod_mdio__phydev_device_table: [::kernel::bindings::mdio_device_id; 2] = _DEVICE_TABLE; /// ``` #[macro_export] macro_rules! module_phy_driver { (@replace_expr $_t:tt $sub:expr) => {$sub}; (@count_devices $($x:expr),*) => { 0usize $(+ $crate::module_phy_driver!(@replace_expr $x 1usize))* }; (@device_table [$($dev:expr),+]) => { // SAFETY: C will not read off the end of this constant since the last element is zero. const _DEVICE_TABLE: [$crate::bindings::mdio_device_id; $crate::module_phy_driver!(@count_devices $($dev),+) + 1] = [ $($dev.mdio_device_id()),+, $crate::bindings::mdio_device_id { phy_id: 0, phy_id_mask: 0 } ]; #[cfg(MODULE)] #[no_mangle] static __mod_mdio__phydev_device_table: [$crate::bindings::mdio_device_id; $crate::module_phy_driver!(@count_devices $($dev),+) + 1] = _DEVICE_TABLE; }; (drivers: [$($driver:ident),+ $(,)?], device_table: [$($dev:expr),+ $(,)?], $($f:tt)*) => { struct Module { _reg: $crate::net::phy::Registration, } $crate::prelude::module! { type: Module, $($f)* } const _: () = { static mut DRIVERS: [$crate::net::phy::DriverVTable; $crate::module_phy_driver!(@count_devices $($driver),+)] = [$($crate::net::phy::create_phy_driver::<$driver>()),+]; impl $crate::Module for Module { fn init(module: &'static $crate::ThisModule) -> Result { // SAFETY: The anonymous constant guarantees that nobody else can access // the `DRIVERS` static. The array is used only in the C side. let drivers = unsafe { &mut DRIVERS }; let mut reg = $crate::net::phy::Registration::register( module, ::core::pin::Pin::static_mut(drivers), )?; Ok(Module { _reg: reg }) } } }; $crate::module_phy_driver!(@device_table [$($dev),+]); } }