# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/ufs/qcom,sm8650-ufshc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Qualcomm SM8650 and Other SoCs UFS Controllers

maintainers:
  - Bjorn Andersson <bjorn.andersson@linaro.org>

# Select only our matches, not all jedec,ufs-2.0
select:
  properties:
    compatible:
      contains:
        enum:
          - qcom,sm8650-ufshc
          - qcom,sm8750-ufshc
  required:
    - compatible

properties:
  compatible:
    items:
      - enum:
          - qcom,sm8650-ufshc
          - qcom,sm8750-ufshc
      - const: qcom,ufshc
      - const: jedec,ufs-2.0

  reg:
    minItems: 1
    maxItems: 2

  reg-names:
    minItems: 1
    items:
      - const: std
      - const: mcq

  clocks:
    minItems: 8
    maxItems: 8

  clock-names:
    items:
      - const: core_clk
      - const: bus_aggr_clk
      - const: iface_clk
      - const: core_clk_unipro
      - const: ref_clk
      - const: tx_lane0_sync_clk
      - const: rx_lane0_sync_clk
      - const: rx_lane1_sync_clk

  qcom,ice:
    $ref: /schemas/types.yaml#/definitions/phandle
    description: phandle to the Inline Crypto Engine node

required:
  - compatible
  - reg

allOf:
  - $ref: qcom,ufs-common.yaml

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/clock/qcom,sm8650-gcc.h>
    #include <dt-bindings/clock/qcom,sm8650-tcsr.h>
    #include <dt-bindings/clock/qcom,rpmh.h>
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/interconnect/qcom,icc.h>
    #include <dt-bindings/interconnect/qcom,sm8650-rpmh.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>

    soc {
        #address-cells = <2>;
        #size-cells = <2>;

        ufshc@1d84000 {
            compatible = "qcom,sm8650-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
            reg = <0x0 0x01d84000 0x0 0x3000>;

            interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;

            clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
                     <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
                     <&gcc GCC_UFS_PHY_AHB_CLK>,
                     <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
                     <&tcsr TCSR_UFS_PAD_CLKREF_EN>,
                     <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
                     <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
                     <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
            clock-names = "core_clk",
                          "bus_aggr_clk",
                          "iface_clk",
                          "core_clk_unipro",
                          "ref_clk",
                          "tx_lane0_sync_clk",
                          "rx_lane0_sync_clk",
                          "rx_lane1_sync_clk";

            resets = <&gcc GCC_UFS_PHY_BCR>;
            reset-names = "rst";
            reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;

            interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
                             &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
                            <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
                             &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
            interconnect-names = "ufs-ddr",
                         "cpu-ufs";

            power-domains = <&gcc UFS_PHY_GDSC>;
            required-opps = <&rpmhpd_opp_nom>;

            operating-points-v2 = <&ufs_opp_table>;

            iommus = <&apps_smmu 0x60 0>;

            lanes-per-direction = <2>;
            qcom,ice = <&ice>;

            phys = <&ufs_mem_phy>;
            phy-names = "ufsphy";

            #reset-cells = <1>;

            vcc-supply = <&vreg_l7b_2p5>;
            vcc-max-microamp = <1100000>;
            vccq-supply = <&vreg_l9b_1p2>;
            vccq-max-microamp = <1200000>;

            ufs_opp_table: opp-table {
                compatible = "operating-points-v2";

                opp-100000000 {
                    opp-hz = /bits/ 64 <100000000>,
                             /bits/ 64 <0>,
                             /bits/ 64 <0>,
                             /bits/ 64 <100000000>,
                             /bits/ 64 <0>,
                             /bits/ 64 <0>,
                             /bits/ 64 <0>,
                             /bits/ 64 <0>;
                    required-opps = <&rpmhpd_opp_low_svs>;
                };

                opp-201500000 {
                    opp-hz = /bits/ 64 <201500000>,
                             /bits/ 64 <0>,
                             /bits/ 64 <0>,
                             /bits/ 64 <201500000>,
                             /bits/ 64 <0>,
                             /bits/ 64 <0>,
                             /bits/ 64 <0>,
                             /bits/ 64 <0>;
                    required-opps = <&rpmhpd_opp_svs>;
                };

                opp-403000000 {
                    opp-hz = /bits/ 64 <403000000>,
                             /bits/ 64 <0>,
                             /bits/ 64 <0>,
                             /bits/ 64 <403000000>,
                             /bits/ 64 <0>,
                             /bits/ 64 <0>,
                             /bits/ 64 <0>,
                             /bits/ 64 <0>;
                    required-opps = <&rpmhpd_opp_nom>;
                };
            };
        };
    };