/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2018 MediaTek Inc. * */ #ifndef __MTK_CMDQ_H__ #define __MTK_CMDQ_H__ #include #include #include #define CMDQ_ADDR_HIGH(addr) ((u32)(((addr) >> 16) & GENMASK(31, 0))) #define CMDQ_ADDR_LOW(addr) ((u16)(addr) | BIT(1)) /* * Every cmdq thread has its own SPRs (Specific Purpose Registers), * so there are 4 * N (threads) SPRs in GCE that shares the same indexes below. */ #define CMDQ_THR_SPR_IDX0 (0) #define CMDQ_THR_SPR_IDX1 (1) #define CMDQ_THR_SPR_IDX2 (2) #define CMDQ_THR_SPR_IDX3 (3) struct cmdq_pkt; enum cmdq_logic_op { CMDQ_LOGIC_ASSIGN = 0, CMDQ_LOGIC_ADD = 1, CMDQ_LOGIC_SUBTRACT = 2, CMDQ_LOGIC_MULTIPLY = 3, CMDQ_LOGIC_XOR = 8, CMDQ_LOGIC_NOT = 9, CMDQ_LOGIC_OR = 10, CMDQ_LOGIC_AND = 11, CMDQ_LOGIC_LEFT_SHIFT = 12, CMDQ_LOGIC_RIGHT_SHIFT = 13, CMDQ_LOGIC_MAX, }; struct cmdq_operand { /* register type */ bool reg; union { /* index */ u16 idx; /* value */ u16 value; }; }; struct cmdq_client_reg { u8 subsys; u16 offset; u16 size; }; struct cmdq_client { struct mbox_client client; struct mbox_chan *chan; }; #if IS_ENABLED(CONFIG_MTK_CMDQ) /** * cmdq_dev_get_client_reg() - parse cmdq client reg from the device * node of CMDQ client * @dev: device of CMDQ mailbox client * @client_reg: CMDQ client reg pointer * @idx: the index of desired reg * * Return: 0 for success; else the error code is returned * * Help CMDQ client parsing the cmdq client reg * from the device node of CMDQ client. */ int cmdq_dev_get_client_reg(struct device *dev, struct cmdq_client_reg *client_reg, int idx); /** * cmdq_mbox_create() - create CMDQ mailbox client and channel * @dev: device of CMDQ mailbox client * @index: index of CMDQ mailbox channel * * Return: CMDQ mailbox client pointer */ struct cmdq_client *cmdq_mbox_create(struct device *dev, int index); /** * cmdq_mbox_destroy() - destroy CMDQ mailbox client and channel * @client: the CMDQ mailbox client */ void cmdq_mbox_destroy(struct cmdq_client *client); /** * cmdq_pkt_create() - create a CMDQ packet * @client: the CMDQ mailbox client * @pkt: the CMDQ packet * @size: required CMDQ buffer size * * Return: 0 for success; else the error code is returned */ int cmdq_pkt_create(struct cmdq_client *client, struct cmdq_pkt *pkt, size_t size); /** * cmdq_pkt_destroy() - destroy the CMDQ packet * @client: the CMDQ mailbox client * @pkt: the CMDQ packet */ void cmdq_pkt_destroy(struct cmdq_client *client, struct cmdq_pkt *pkt); /** * cmdq_pkt_write() - append write command to the CMDQ packet * @pkt: the CMDQ packet * @subsys: the CMDQ sub system code * @offset: register offset from CMDQ sub system * @value: the specified target register value * * Return: 0 for success; else the error code is returned */ int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value); /** * cmdq_pkt_write_mask() - append write command with mask to the CMDQ packet * @pkt: the CMDQ packet * @subsys: the CMDQ sub system code * @offset: register offset from CMDQ sub system * @value: the specified target register value * @mask: the specified target register mask * * Return: 0 for success; else the error code is returned */ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value, u32 mask); /* * cmdq_pkt_read_s() - append read_s command to the CMDQ packet * @pkt: the CMDQ packet * @high_addr_reg_idx: internal register ID which contains high address of pa * @addr_low: low address of pa * @reg_idx: the CMDQ internal register ID to cache read data * * Return: 0 for success; else the error code is returned */ int cmdq_pkt_read_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, u16 addr_low, u16 reg_idx); /** * cmdq_pkt_write_s() - append write_s command to the CMDQ packet * @pkt: the CMDQ packet * @high_addr_reg_idx: internal register ID which contains high address of pa * @addr_low: low address of pa * @src_reg_idx: the CMDQ internal register ID which cache source value * * Return: 0 for success; else the error code is returned * * Support write value to physical address without subsys. Use CMDQ_ADDR_HIGH() * to get high address and call cmdq_pkt_assign() to assign value into internal * reg. Also use CMDQ_ADDR_LOW() to get low address for addr_low parameter when * call to this function. */ int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, u16 addr_low, u16 src_reg_idx); /** * cmdq_pkt_write_s_mask() - append write_s with mask command to the CMDQ packet * @pkt: the CMDQ packet * @high_addr_reg_idx: internal register ID which contains high address of pa * @addr_low: low address of pa * @src_reg_idx: the CMDQ internal register ID which cache source value * @mask: the specified target address mask, use U32_MAX if no need * * Return: 0 for success; else the error code is returned * * Support write value to physical address without subsys. Use CMDQ_ADDR_HIGH() * to get high address and call cmdq_pkt_assign() to assign value into internal * reg. Also use CMDQ_ADDR_LOW() to get low address for addr_low parameter when * call to this function. */ int cmdq_pkt_write_s_mask(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, u16 addr_low, u16 src_reg_idx, u32 mask); /** * cmdq_pkt_write_s_value() - append write_s command to the CMDQ packet which * write value to a physical address * @pkt: the CMDQ packet * @high_addr_reg_idx: internal register ID which contains high address of pa * @addr_low: low address of pa * @value: the specified target value * * Return: 0 for success; else the error code is returned */ int cmdq_pkt_write_s_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx, u16 addr_low, u32 value); /** * cmdq_pkt_write_s_mask_value() - append write_s command with mask to the CMDQ * packet which write value to a physical * address * @pkt: the CMDQ packet * @high_addr_reg_idx: internal register ID which contains high address of pa * @addr_low: low address of pa * @value: the specified target value * @mask: the specified target mask * * Return: 0 for success; else the error code is returned */ int cmdq_pkt_write_s_mask_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx, u16 addr_low, u32 value, u32 mask); /** * cmdq_pkt_mem_move() - append memory move command to the CMDQ packet * @pkt: the CMDQ packet * @src_addr: source address * @dst_addr: destination address * * Appends a CMDQ command to copy the value found in `src_addr` to `dst_addr`. * * Return: 0 for success; else the error code is returned */ int cmdq_pkt_mem_move(struct cmdq_pkt *pkt, dma_addr_t src_addr, dma_addr_t dst_addr); /** * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet * @pkt: the CMDQ packet * @event: the desired event type to wait * @clear: clear event or not after event arrive * * Return: 0 for success; else the error code is returned */ int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event, bool clear); /** * cmdq_pkt_acquire_event() - append acquire event command to the CMDQ packet * @pkt: the CMDQ packet * @event: the desired event to be acquired * * User can use cmdq_pkt_acquire_event() as `mutex_lock` and cmdq_pkt_clear_event() * as `mutex_unlock` to protect some `critical section` instructions between them. * cmdq_pkt_acquire_event() would wait for event to be cleared. * After event is cleared by cmdq_pkt_clear_event in other GCE threads, * cmdq_pkt_acquire_event() would set event and keep executing next instruction. * * Return: 0 for success; else the error code is returned */ int cmdq_pkt_acquire_event(struct cmdq_pkt *pkt, u16 event); /** * cmdq_pkt_clear_event() - append clear event command to the CMDQ packet * @pkt: the CMDQ packet * @event: the desired event to be cleared * * Return: 0 for success; else the error code is returned */ int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u16 event); /** * cmdq_pkt_set_event() - append set event command to the CMDQ packet * @pkt: the CMDQ packet * @event: the desired event to be set * * Return: 0 for success; else the error code is returned */ int cmdq_pkt_set_event(struct cmdq_pkt *pkt, u16 event); /** * cmdq_pkt_poll() - Append polling command to the CMDQ packet, ask GCE to * execute an instruction that wait for a specified * hardware register to check for the value w/o mask. * All GCE hardware threads will be blocked by this * instruction. * @pkt: the CMDQ packet * @subsys: the CMDQ sub system code * @offset: register offset from CMDQ sub system * @value: the specified target register value * * Return: 0 for success; else the error code is returned */ int cmdq_pkt_poll(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value); /** * cmdq_pkt_poll_mask() - Append polling command to the CMDQ packet, ask GCE to * execute an instruction that wait for a specified * hardware register to check for the value w/ mask. * All GCE hardware threads will be blocked by this * instruction. * @pkt: the CMDQ packet * @subsys: the CMDQ sub system code * @offset: register offset from CMDQ sub system * @value: the specified target register value * @mask: the specified target register mask * * Return: 0 for success; else the error code is returned */ int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value, u32 mask); /** * cmdq_pkt_logic_command() - Append logic command to the CMDQ packet, ask GCE to * execute an instruction that store the result of logic operation * with left and right operand into result_reg_idx. * @pkt: the CMDQ packet * @result_reg_idx: SPR index that store operation result of left_operand and right_operand * @left_operand: left operand * @s_op: the logic operator enum * @right_operand: right operand * * Return: 0 for success; else the error code is returned */ int cmdq_pkt_logic_command(struct cmdq_pkt *pkt, u16 result_reg_idx, struct cmdq_operand *left_operand, enum cmdq_logic_op s_op, struct cmdq_operand *right_operand); /** * cmdq_pkt_assign() - Append logic assign command to the CMDQ packet, ask GCE * to execute an instruction that set a constant value into * internal register and use as value, mask or address in * read/write instruction. * @pkt: the CMDQ packet * @reg_idx: the CMDQ internal register ID * @value: the specified value * * Return: 0 for success; else the error code is returned */ int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value); /** * cmdq_pkt_poll_addr() - Append blocking POLL command to CMDQ packet * @pkt: the CMDQ packet * @addr: the hardware register address * @value: the specified target register value * @mask: the specified target register mask * * Appends a polling (POLL) command to the CMDQ packet and asks the GCE * to execute an instruction that checks for the specified `value` (with * or without `mask`) to appear in the specified hardware register `addr`. * All GCE threads will be blocked by this instruction. * * Return: 0 for success or negative error code */ int cmdq_pkt_poll_addr(struct cmdq_pkt *pkt, dma_addr_t addr, u32 value, u32 mask); /** * cmdq_pkt_jump_abs() - Append jump command to the CMDQ packet, ask GCE * to execute an instruction that change current thread * PC to a absolute physical address which should * contains more instruction. * @pkt: the CMDQ packet * @addr: absolute physical address of target instruction buffer * @shift_pa: shift bits of physical address in CMDQ instruction. This value * is got by cmdq_get_shift_pa(). * * Return: 0 for success; else the error code is returned */ int cmdq_pkt_jump_abs(struct cmdq_pkt *pkt, dma_addr_t addr, u8 shift_pa); /* This wrapper has to be removed after all users migrated to jump_abs */ static inline int cmdq_pkt_jump(struct cmdq_pkt *pkt, dma_addr_t addr, u8 shift_pa) { return cmdq_pkt_jump_abs(pkt, addr, shift_pa); } /** * cmdq_pkt_jump_rel() - Append jump command to the CMDQ packet, ask GCE * to execute an instruction that change current thread * PC to a physical address with relative offset. The * target address should contains more instruction. * @pkt: the CMDQ packet * @offset: relative offset of target instruction buffer from current PC. * @shift_pa: shift bits of physical address in CMDQ instruction. This value * is got by cmdq_get_shift_pa(). * * Return: 0 for success; else the error code is returned */ int cmdq_pkt_jump_rel(struct cmdq_pkt *pkt, s32 offset, u8 shift_pa); /** * cmdq_pkt_eoc() - Append EOC and ask GCE to generate an IRQ at end of execution * @pkt: The CMDQ packet * * Appends an End Of Code (EOC) command to the CMDQ packet and asks the GCE * to generate an interrupt at the end of the execution of all commands in * the pipeline. * The EOC command is usually appended to the end of the pipeline to notify * that all commands are done. * * Return: 0 for success or negative error number */ int cmdq_pkt_eoc(struct cmdq_pkt *pkt); /** * cmdq_pkt_finalize() - Append EOC and jump command to pkt. * @pkt: the CMDQ packet * * Return: 0 for success; else the error code is returned */ int cmdq_pkt_finalize(struct cmdq_pkt *pkt); #else /* IS_ENABLED(CONFIG_MTK_CMDQ) */ static inline int cmdq_dev_get_client_reg(struct device *dev, struct cmdq_client_reg *client_reg, int idx) { return -ENODEV; } static inline struct cmdq_client *cmdq_mbox_create(struct device *dev, int index) { return ERR_PTR(-EINVAL); } static inline void cmdq_mbox_destroy(struct cmdq_client *client) { } static inline int cmdq_pkt_create(struct cmdq_client *client, struct cmdq_pkt *pkt, size_t size) { return -EINVAL; } static inline void cmdq_pkt_destroy(struct cmdq_client *client, struct cmdq_pkt *pkt) { } static inline int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value) { return -ENOENT; } static inline int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value, u32 mask) { return -ENOENT; } static inline int cmdq_pkt_read_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, u16 addr_low, u16 reg_idx) { return -ENOENT; } static inline int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, u16 addr_low, u16 src_reg_idx) { return -ENOENT; } static inline int cmdq_pkt_write_s_mask(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, u16 addr_low, u16 src_reg_idx, u32 mask) { return -ENOENT; } static inline int cmdq_pkt_write_s_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx, u16 addr_low, u32 value) { return -ENOENT; } static inline int cmdq_pkt_write_s_mask_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx, u16 addr_low, u32 value, u32 mask) { return -ENOENT; } static inline int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event, bool clear) { return -EINVAL; } static inline int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u16 event) { return -EINVAL; } static inline int cmdq_pkt_set_event(struct cmdq_pkt *pkt, u16 event) { return -EINVAL; } static inline int cmdq_pkt_poll(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value) { return -EINVAL; } static inline int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value, u32 mask) { return -EINVAL; } static inline int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value) { return -EINVAL; } static inline int cmdq_pkt_poll_addr(struct cmdq_pkt *pkt, dma_addr_t addr, u32 value, u32 mask) { return -EINVAL; } static inline int cmdq_pkt_jump_abs(struct cmdq_pkt *pkt, dma_addr_t addr, u8 shift_pa) { return -EINVAL; } static inline int cmdq_pkt_jump(struct cmdq_pkt *pkt, dma_addr_t addr, u8 shift_pa) { return -EINVAL; } static inline int cmdq_pkt_jump_rel(struct cmdq_pkt *pkt, s32 offset, u8 shift_pa) { return -EINVAL; } static inline int cmdq_pkt_eoc(struct cmdq_pkt *pkt) { return -EINVAL; } static inline int cmdq_pkt_finalize(struct cmdq_pkt *pkt) { return -EINVAL; } #endif /* IS_ENABLED(CONFIG_MTK_CMDQ) */ #endif /* __MTK_CMDQ_H__ */