Failed
gprs:nanobts+band-1900.cs_paging_gprs_active.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=14545): Process ended prematurely: osmo-stp_10.42.42.5(pid=14545) [trial-2349↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14545)]
Standard Output
---------------------------------------------- trial-2349 gprs:nanobts+band-1900 cs_paging_gprs_active.py ---------------------------------------------- 21:07:55.344869 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 21:07:55.355823 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 21:07:55.487621 tst cs_paging_gprs_active.py: using LAC 16819 21:07:55.613155 tst cs_paging_gprs_active.py: using RAC 244 21:07:55.738199 tst cs_paging_gprs_active.py: using CellId 16819 21:07:55.870173 tst cs_paging_gprs_active.py: using BVCI 16820 21:07:55.894856 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 21:07:55.906097 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 21:07:55.917066 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 21:07:55.927984 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 21:07:55.938932 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 21:07:55.949858 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 21:07:55.961033 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 21:07:55.971958 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 21:07:55.983080 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 21:07:56.099065 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 21:07:56.394429 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 21:07:56.530141 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:07:56.866443 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14485): Launched 21:07:57.147106 run iperf3-srv_10.42.42.10(pid=14486): Launched 21:07:57.346188 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 21:07:57.481352 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:07:57.817214 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14487): Launched 21:07:58.097353 run iperf3-srv_10.42.42.10(pid=14488): Launched 21:07:58.295888 tst cs_paging_gprs_active.py:38: start network... 21:07:58.431133 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:07:58.950814 run create_hlr_db(pid=14489): Launched 21:07:59.137617 bus /sierra_2: Setting Powered False 21:08:00.158794 run create_hlr_db(pid=14489): Terminated: ok {rc=0} 21:08:00.563843 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14491): Launched 21:08:00.927211 run osmo-hlr_10.42.42.2(pid=14492): Launched 21:08:01.096438 run osmo-stp_10.42.42.5: Starting osmo-stp 21:08:01.861335 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14531): Launched 21:08:02.306912 run osmo-stp_10.42.42.5(pid=14545): Launched 21:08:02.591094 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:08:03.339814 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14603): Launched 21:08:03.497357 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:08:03.868702 run patchelf(pid=14644): Launched 21:08:04.087706 run osmo-stp_10.42.42.5(pid=14545): ERR: Terminated: ERROR {rc=1} [trial-2349↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14545)] 21:08:04.248650 run osmo-stp_10.42.42.5(pid=14545): stdout: | (launched: 2022-12-08_21:08:02.042874) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:08:04.412249 run osmo-stp_10.42.42.5(pid=14545): stderr: | �[0;m�[38;5;43m20221208210802408 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208210802408 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208210802415 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208210802415 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208210802420 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208210802420 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208210802420 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:08:04.569948 run osmo-stp_10.42.42.5(pid=14545): stdout: | (launched: 2022-12-08_21:08:02.042874) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:08:04.733552 run osmo-stp_10.42.42.5(pid=14545): stderr: | �[0;m�[38;5;43m20221208210802408 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208210802408 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208210802415 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208210802415 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208210802420 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208210802420 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208210802420 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:08:04.911573 run patchelf(pid=14644): Terminating (SIGINT) 21:08:05.100542 run patchelf(pid=14644): Terminated: ok {rc=0} 21:08:05.136063 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=14545): Process ended prematurely: osmo-stp_10.42.42.5(pid=14545) [trial-2349↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14545)] [trial-2349↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38] 21:08:05.146652 tst cs_paging_gprs_active.py:38: Test FAILED (9.8 sec) 21:08:05.212013 run osmo-hlr_10.42.42.2(pid=14492): ERR: Terminated: ERROR {rc=237} [trial-2349↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14492)] 21:08:05.265530 run osmo-hlr_10.42.42.2(pid=14492): stdout: | (launched: 2022-12-08_21:08:00.717542) 21:08:05.319171 run osmo-hlr_10.42.42.2(pid=14492): stderr: | �[0;m�[1;31m20221208210800934 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208210800934 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208210800934 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208210800934 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208210800934 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208210800934 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208210800958 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2349/run.2022-12-08_20-04-33/gprs:nanobts+band-1900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208210800979 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208210800979 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208210800979 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:08:05.365228 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14485): Terminating (SIGTERM) 21:08:05.410325 run iperf3-srv_10.42.42.10(pid=14486): Terminating (SIGTERM) 21:08:05.456412 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14487): Terminating (SIGTERM) 21:08:05.499715 run iperf3-srv_10.42.42.10(pid=14488): Terminating (SIGTERM) 21:08:05.543896 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14491): Terminating (SIGTERM) 21:08:05.589532 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14531): Terminating (SIGTERM) 21:08:05.634856 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14603): Terminating (SIGTERM) 21:08:05.646002 --- ParallelTerminationStrategy: PID 14485 died... 21:08:05.706353 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14485): Terminated: ok {rc=0} 21:08:05.717596 --- ParallelTerminationStrategy: PID 14486 died... 21:08:05.775444 run iperf3-srv_10.42.42.10(pid=14486): Terminated {rc=256} 21:08:05.786489 --- ParallelTerminationStrategy: PID 14487 died... 21:08:05.844874 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14487): Terminated: ok {rc=0} 21:08:05.855795 --- ParallelTerminationStrategy: PID 14488 died... 21:08:05.913065 run iperf3-srv_10.42.42.10(pid=14488): Terminated {rc=256} 21:08:05.924164 --- ParallelTerminationStrategy: PID 14491 died... 21:08:05.982068 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14491): Terminated: ok {rc=0} 21:08:05.992919 --- ParallelTerminationStrategy: PID 14531 died... 21:08:06.049926 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14531): Terminated: ok {rc=0} 21:08:06.060920 --- ParallelTerminationStrategy: PID 14603 died... 21:08:06.118725 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14603): Terminated: ok {rc=0} 21:08:06.210479 bus /gobi_0: Setting Powered False 21:08:07.318536 bus /gobi_0: Setting Powered False 21:08:08.427525 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14545): Process ended prematurely: osmo-stp_10.42.42.5(pid=14545) [trial-2349↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14545)]