Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-lms.ping.py (from gprs_trx-lms)

Failing for the past 24 builds (Since #2327 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=22219): Process ended prematurely: osmo-stp_10.42.42.5(pid=22219) [trial-2350↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22219)]

Standard Output

----------------------------------------------
trial-2350 gprs:trx-lms ping.py
----------------------------------------------
22:33:25.031821 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
22:33:25.043386 tst                     gprs:trx-lms: Using 1 x bts (candidates: 1)
22:33:25.185348 tst                          ping.py: using LAC 17203
22:33:25.308777 tst                          ping.py: using RAC 118
22:33:25.432767 tst                          ping.py: using CellId 17203
22:33:25.556064 tst                          ping.py: using BVCI 17204
22:33:25.580287 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
22:33:25.591214 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
22:33:25.602001 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
22:33:25.612662 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
22:33:25.623371 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
22:33:25.634017 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
22:33:25.644755 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
22:33:25.655529 tst                     gprs:trx-lms: Using 1 x modem (candidates: 4)
22:33:25.941522 tst                       ping.py:19: start network...
22:33:26.072918 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
22:33:26.578916 run         create_hlr_db(pid=22213): Launched
22:33:26.762239 bus                          /gobi_6: Setting Powered False
22:33:27.783414 run         create_hlr_db(pid=22213): Terminated: ok {rc=0}
22:33:28.181433 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22215): Launched
22:33:28.477864 run   osmo-hlr_10.42.42.2(pid=22216): Launched
22:33:28.587430 run              osmo-stp_10.42.42.5: Starting osmo-stp
22:33:29.106112 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22218): Launched
22:33:29.404141 run   osmo-stp_10.42.42.5(pid=22219): Launched
22:33:29.512880 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
22:33:30.030103 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22221): Launched
22:33:30.135920 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
22:33:30.395287 run              patchelf(pid=22222): Launched
22:33:30.570542 run   osmo-stp_10.42.42.5(pid=22219): ERR: Terminated: ERROR {rc=1}  [trial-2350↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22219)]
22:33:30.698696 run   osmo-stp_10.42.42.5(pid=22219): stdout: 
| (launched: 2022-12-08_22:33:29.257647)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
22:33:30.827046 run   osmo-stp_10.42.42.5(pid=22219): stderr: 
| �[0;m�[38;5;43m20221208223329428 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221208223329428 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221208223329428 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221208223329429 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221208223329429 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221208223329429 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221208223329429 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
22:33:30.968409 run   osmo-stp_10.42.42.5(pid=22219): stdout: 
| (launched: 2022-12-08_22:33:29.257647)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
22:33:31.102678 run   osmo-stp_10.42.42.5(pid=22219): stderr: 
| �[0;m�[38;5;43m20221208223329428 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221208223329428 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221208223329428 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221208223329429 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221208223329429 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221208223329429 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221208223329429 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
22:33:31.260233 run              patchelf(pid=22222): Terminating (SIGINT)
22:33:31.446273 run              patchelf(pid=22222): Terminated: ok {rc=0}
22:33:31.481949 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=22219): Process ended prematurely: osmo-stp_10.42.42.5(pid=22219) [trial-2350↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22219)]  [trial-2350↪gprs:trx-lms↪ping.py:22]
22:33:31.492511 tst                       ping.py:22: Test FAILED (6.4 sec)
22:33:31.559186 run   osmo-hlr_10.42.42.2(pid=22216): ERR: Terminated: ERROR {rc=237}  [trial-2350↪gprs:trx-lms↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22216)]
22:33:31.613650 run   osmo-hlr_10.42.42.2(pid=22216): stdout: 
| (launched: 2022-12-08_22:33:28.331536) 
22:33:31.668886 run   osmo-hlr_10.42.42.2(pid=22216): stderr: 
| �[0;m�[1;31m20221208223328507 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221208223328507 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221208223328507 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221208223328507 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221208223328507 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221208223328508 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221208223328520 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2350/run.2022-12-08_21-44-24/gprs:trx-lms/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221208223328530 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221208223328531 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221208223328531 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
22:33:31.716387 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22215): Terminating (SIGTERM)
22:33:31.762455 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22218): Terminating (SIGTERM)
22:33:31.807611 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22221): Terminating (SIGTERM)
22:33:31.819785 ---      ParallelTerminationStrategy: PID 22215 died...
22:33:31.880762 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22215): Terminated: ok {rc=0}
22:33:31.892286 ---      ParallelTerminationStrategy: PID 22218 died...
22:33:31.950532 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22218): Terminated: ok {rc=0}
22:33:31.961667 ---      ParallelTerminationStrategy: PID 22221 died...
22:33:32.021121 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22221): Terminated: ok {rc=0}
22:33:32.114444 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22219): Process ended prematurely: osmo-stp_10.42.42.5(pid=22219) [trial-2350↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22219)]