Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=18887): Process ended prematurely: osmo-stp_10.42.42.5(pid=18887) [trial-2350↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18887)]
Standard Output
---------------------------------------------- trial-2350 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 22:01:07.915060 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:01:07.925746 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 22:01:08.069464 tst cs_paging_gprs_active.py: using LAC 17031 22:01:08.195932 tst cs_paging_gprs_active.py: using RAC 201 22:01:08.322585 tst cs_paging_gprs_active.py: using CellId 17031 22:01:08.449650 tst cs_paging_gprs_active.py: using BVCI 17032 22:01:08.474960 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:01:08.486490 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:01:08.497551 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:01:08.509382 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:01:08.520740 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:01:08.532226 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:01:08.543894 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:01:08.555372 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:01:08.566588 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 22:01:08.686296 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 22:01:08.963306 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:01:09.089432 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:01:09.401521 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18877): Launched 22:01:09.666583 run iperf3-srv_10.42.42.10(pid=18878): Launched 22:01:09.851938 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:01:09.978906 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:01:10.292511 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18879): Launched 22:01:10.553608 run iperf3-srv_10.42.42.10(pid=18880): Launched 22:01:10.738181 tst cs_paging_gprs_active.py:38: start network... 22:01:10.864339 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:01:11.341590 run create_hlr_db(pid=18881): Launched 22:01:11.515004 bus /gobi_6: Setting Powered False 22:01:12.538956 run create_hlr_db(pid=18881): Terminated: ok {rc=0} 22:01:12.966141 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18883): Launched 22:01:13.287475 run osmo-hlr_10.42.42.2(pid=18884): Launched 22:01:13.408798 run osmo-stp_10.42.42.5: Starting osmo-stp 22:01:13.966677 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18886): Launched 22:01:14.287563 run osmo-stp_10.42.42.5(pid=18887): Launched 22:01:14.404808 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:01:14.965150 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18889): Launched 22:01:15.079933 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:01:15.359066 run patchelf(pid=18890): Launched 22:01:15.547656 run osmo-stp_10.42.42.5(pid=18887): ERR: Terminated: ERROR {rc=1} [trial-2350↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18887)] 22:01:15.685706 run osmo-stp_10.42.42.5(pid=18887): stdout: | (launched: 2022-12-08_22:01:14.131169) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:01:15.824616 run osmo-stp_10.42.42.5(pid=18887): stderr: | �[0;m�[38;5;43m20221208220114325 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208220114325 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208220114325 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208220114326 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208220114326 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208220114326 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208220114326 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:01:15.995085 run osmo-stp_10.42.42.5(pid=18887): stdout: | (launched: 2022-12-08_22:01:14.131169) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:01:16.131201 run osmo-stp_10.42.42.5(pid=18887): stderr: | �[0;m�[38;5;43m20221208220114325 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208220114325 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208220114325 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208220114326 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208220114326 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208220114326 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208220114326 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:01:16.281829 run patchelf(pid=18890): Terminating (SIGINT) 22:01:16.458456 run patchelf(pid=18890): Terminated: ok {rc=0} 22:01:16.491738 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=18887): Process ended prematurely: osmo-stp_10.42.42.5(pid=18887) [trial-2350↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18887)] [trial-2350↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 22:01:16.502003 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 22:01:16.568440 run osmo-hlr_10.42.42.2(pid=18884): ERR: Terminated: ERROR {rc=237} [trial-2350↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18884)] 22:01:16.628341 run osmo-hlr_10.42.42.2(pid=18884): stdout: | (launched: 2022-12-08_22:01:13.130676) 22:01:16.697618 run osmo-hlr_10.42.42.2(pid=18884): stderr: | �[0;m�[1;31m20221208220113327 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208220113327 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208220113327 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208220113328 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208220113328 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208220113328 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208220113340 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2350/run.2022-12-08_21-44-24/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208220113348 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208220113348 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208220113348 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:01:16.756153 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18877): Terminating (SIGTERM) 22:01:16.814272 run iperf3-srv_10.42.42.10(pid=18878): Terminating (SIGTERM) 22:01:16.868593 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18879): Terminating (SIGTERM) 22:01:16.927219 run iperf3-srv_10.42.42.10(pid=18880): Terminating (SIGTERM) 22:01:16.984199 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18883): Terminating (SIGTERM) 22:01:17.036170 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18886): Terminating (SIGTERM) 22:01:17.090637 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18889): Terminating (SIGTERM) 22:01:17.102844 --- ParallelTerminationStrategy: PID 18877 died... 22:01:17.167493 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18877): Terminated: ok {rc=0} 22:01:17.178563 --- ParallelTerminationStrategy: PID 18878 died... 22:01:17.235920 run iperf3-srv_10.42.42.10(pid=18878): Terminated {rc=256} 22:01:17.246300 --- ParallelTerminationStrategy: PID 18879 died... 22:01:17.302663 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18879): Terminated: ok {rc=0} 22:01:17.312858 --- ParallelTerminationStrategy: PID 18880 died... 22:01:17.369301 run iperf3-srv_10.42.42.10(pid=18880): Terminated {rc=256} 22:01:17.379472 --- ParallelTerminationStrategy: PID 18883 died... 22:01:17.436196 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18883): Terminated: ok {rc=0} 22:01:17.446213 --- ParallelTerminationStrategy: PID 18886 died... 22:01:17.502569 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18886): Terminated: ok {rc=0} 22:01:17.512754 --- ParallelTerminationStrategy: PID 18889 died... 22:01:17.569377 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18889): Terminated: ok {rc=0} 22:01:17.656306 bus /gobi_0: Setting Powered False 22:01:18.762650 bus /gobi_0: Setting Powered False 22:01:19.873651 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18887): Process ended prematurely: osmo-stp_10.42.42.5(pid=18887) [trial-2350↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18887)]