Failed
gprs:trx-umtrx+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=6151): Process ended prematurely: osmo-stp_10.42.42.5(pid=6151) [trial-2352↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6151)]
Standard Output
---------------------------------------------- trial-2352 gprs:trx-umtrx+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 01:21:07.864189 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:21:07.875435 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 01:21:08.021719 tst cs_paging_gprs_active.py: using LAC 18080 01:21:08.151834 tst cs_paging_gprs_active.py: using RAC 230 01:21:08.286471 tst cs_paging_gprs_active.py: using CellId 18080 01:21:08.415318 tst cs_paging_gprs_active.py: using BVCI 18081 01:21:08.440518 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:21:08.451898 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:21:08.463029 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:21:08.474143 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:21:08.485202 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:21:08.496322 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:21:08.507577 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:21:08.518626 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:21:08.529833 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 01:21:08.646341 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 01:21:08.939147 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:21:09.075859 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:21:09.415259 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6141): Launched 01:21:09.696444 run iperf3-srv_10.42.42.10(pid=6142): Launched 01:21:09.897862 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:21:10.034684 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:21:10.374422 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6143): Launched 01:21:10.655830 run iperf3-srv_10.42.42.10(pid=6144): Launched 01:21:10.856790 tst cs_paging_gprs_active.py:38: start network... 01:21:10.993379 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:21:11.519186 run create_hlr_db(pid=6145): Launched 01:21:11.708809 bus /gobi_6: Setting Powered False 01:21:12.730210 run create_hlr_db(pid=6145): Terminated: ok {rc=0} 01:21:13.165527 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6147): Launched 01:21:13.493965 run osmo-hlr_10.42.42.2(pid=6148): Launched 01:21:13.614961 run osmo-stp_10.42.42.5: Starting osmo-stp 01:21:14.184090 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6150): Launched 01:21:14.511611 run osmo-stp_10.42.42.5(pid=6151): Launched 01:21:14.630155 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:21:15.200127 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6153): Launched 01:21:15.316721 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:21:15.602426 run patchelf(pid=6154): Launched 01:21:15.794377 run osmo-stp_10.42.42.5(pid=6151): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6151)] 01:21:15.942044 run osmo-stp_10.42.42.5(pid=6151): stdout: | (launched: 2022-12-09_01:21:14.350698) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:21:16.084220 run osmo-stp_10.42.42.5(pid=6151): stderr: | �[0;m�[38;5;43m20221209012114542 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209012114542 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209012114542 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209012114543 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209012114543 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209012114543 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209012114543 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:21:16.221712 run osmo-stp_10.42.42.5(pid=6151): stdout: | (launched: 2022-12-09_01:21:14.350698) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:21:16.359173 run osmo-stp_10.42.42.5(pid=6151): stderr: | �[0;m�[38;5;43m20221209012114542 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209012114542 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209012114542 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209012114543 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209012114543 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209012114543 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209012114543 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:21:16.518345 run patchelf(pid=6154): Terminating (SIGINT) 01:21:16.704899 run patchelf(pid=6154): Terminated: ok {rc=0} 01:21:16.739951 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=6151): Process ended prematurely: osmo-stp_10.42.42.5(pid=6151) [trial-2352↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6151)] [trial-2352↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 01:21:16.750802 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 01:21:16.815736 run osmo-hlr_10.42.42.2(pid=6148): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6148)] 01:21:16.868225 run osmo-hlr_10.42.42.2(pid=6148): stdout: | (launched: 2022-12-09_01:21:13.331967) 01:21:16.921383 run osmo-hlr_10.42.42.2(pid=6148): stderr: | �[0;m�[1;31m20221209012113531 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209012113531 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209012113531 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209012113531 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209012113531 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209012113531 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209012113544 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:trx-umtrx+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209012113552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209012113552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209012113552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:21:16.966634 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6141): Terminating (SIGTERM) 01:21:17.011318 run iperf3-srv_10.42.42.10(pid=6142): Terminating (SIGTERM) 01:21:17.054618 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6143): Terminating (SIGTERM) 01:21:17.097147 run iperf3-srv_10.42.42.10(pid=6144): Terminating (SIGTERM) 01:21:17.139963 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6147): Terminating (SIGTERM) 01:21:17.182598 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6150): Terminating (SIGTERM) 01:21:17.224598 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6153): Terminating (SIGTERM) 01:21:17.234362 --- ParallelTerminationStrategy: PID 6141 died... 01:21:17.290386 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6141): Terminated: ok {rc=0} 01:21:17.300537 --- ParallelTerminationStrategy: PID 6142 died... 01:21:17.356471 run iperf3-srv_10.42.42.10(pid=6142): Terminated {rc=256} 01:21:17.366592 --- ParallelTerminationStrategy: PID 6143 died... 01:21:17.422306 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6143): Terminated: ok {rc=0} 01:21:17.432399 --- ParallelTerminationStrategy: PID 6144 died... 01:21:17.488078 run iperf3-srv_10.42.42.10(pid=6144): Terminated {rc=256} 01:21:17.498262 --- ParallelTerminationStrategy: PID 6147 died... 01:21:17.554065 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6147): Terminated: ok {rc=0} 01:21:17.564057 --- ParallelTerminationStrategy: PID 6150 died... 01:21:17.619250 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6150): Terminated: ok {rc=0} 01:21:17.629422 --- ParallelTerminationStrategy: PID 6153 died... 01:21:17.684577 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6153): Terminated: ok {rc=0} 01:21:17.771270 bus /gobi_0: Setting Powered False 01:21:18.877984 bus /gobi_0: Setting Powered False 01:21:19.993264 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6151): Process ended prematurely: osmo-stp_10.42.42.5(pid=6151) [trial-2352↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6151)]