Failed
gprs:trx-lms-limenet-micro.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=16131): Process ended prematurely: osmo-stp_10.42.42.5(pid=16131) [trial-2353↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16131)]
Standard Output
---------------------------------------------- trial-2353 gprs:trx-lms-limenet-micro cs_paging_gprs_active.py ---------------------------------------------- 03:04:12.428525 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 03:04:12.439901 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 03:04:12.585508 tst cs_paging_gprs_active.py: using LAC 18625 03:04:12.711252 tst cs_paging_gprs_active.py: using RAC 10 03:04:12.837718 tst cs_paging_gprs_active.py: using CellId 18625 03:04:12.957757 tst cs_paging_gprs_active.py: using BVCI 18626 03:04:12.981108 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 03:04:12.991985 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 03:04:13.002840 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 03:04:13.014028 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 03:04:13.024660 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 03:04:13.035438 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 03:04:13.046380 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 03:04:13.057060 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 03:04:13.067875 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 03:04:13.181140 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 03:04:13.474879 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 03:04:13.611095 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:04:13.944792 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16121): Launched 03:04:14.222683 run iperf3-srv_10.42.42.10(pid=16122): Launched 03:04:14.421913 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 03:04:14.557276 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:04:14.891666 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16123): Launched 03:04:15.169500 run iperf3-srv_10.42.42.10(pid=16124): Launched 03:04:15.367844 tst cs_paging_gprs_active.py:38: start network... 03:04:15.503527 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:04:16.082886 run create_hlr_db(pid=16125): Launched 03:04:16.272654 bus /sierra_2: Setting Powered False 03:04:17.291280 run create_hlr_db(pid=16125): Terminated: ok {rc=0} 03:04:17.719154 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16127): Launched 03:04:18.040655 run osmo-hlr_10.42.42.2(pid=16128): Launched 03:04:18.157833 run osmo-stp_10.42.42.5: Starting osmo-stp 03:04:18.717206 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16130): Launched 03:04:19.038996 run osmo-stp_10.42.42.5(pid=16131): Launched 03:04:19.155797 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:04:19.717541 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16133): Launched 03:04:19.832653 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:04:20.112714 run patchelf(pid=16134): Launched 03:04:20.300693 run osmo-stp_10.42.42.5(pid=16131): ERR: Terminated: ERROR {rc=1} [trial-2353↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16131)] 03:04:20.438240 run osmo-stp_10.42.42.5(pid=16131): stdout: | (launched: 2022-12-09_03:04:18.881826) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:04:20.575760 run osmo-stp_10.42.42.5(pid=16131): stderr: | �[0;m�[38;5;43m20221209030419074 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209030419074 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209030419075 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209030419075 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209030419076 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209030419076 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209030419076 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:04:20.708911 run osmo-stp_10.42.42.5(pid=16131): stdout: | (launched: 2022-12-09_03:04:18.881826) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:04:20.841096 run osmo-stp_10.42.42.5(pid=16131): stderr: | �[0;m�[38;5;43m20221209030419074 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209030419074 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209030419075 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209030419075 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209030419076 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209030419076 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209030419076 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:04:20.995035 run patchelf(pid=16134): Terminating (SIGINT) 03:04:21.175062 run patchelf(pid=16134): Terminated: ok {rc=0} 03:04:21.208146 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=16131): Process ended prematurely: osmo-stp_10.42.42.5(pid=16131) [trial-2353↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16131)] [trial-2353↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38] 03:04:21.217895 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 03:04:21.279431 run osmo-hlr_10.42.42.2(pid=16128): ERR: Terminated: ERROR {rc=237} [trial-2353↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16128)] 03:04:21.330049 run osmo-hlr_10.42.42.2(pid=16128): stdout: | (launched: 2022-12-09_03:04:17.883259) 03:04:21.381128 run osmo-hlr_10.42.42.2(pid=16128): stderr: | �[0;m�[1;31m20221209030418081 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209030418081 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209030418081 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209030418081 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209030418081 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209030418081 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209030418093 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:trx-lms-limenet-micro/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209030418101 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209030418101 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209030418101 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:04:21.425054 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16121): Terminating (SIGTERM) 03:04:21.466133 run iperf3-srv_10.42.42.10(pid=16122): Terminating (SIGTERM) 03:04:21.507097 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16123): Terminating (SIGTERM) 03:04:21.547928 run iperf3-srv_10.42.42.10(pid=16124): Terminating (SIGTERM) 03:04:21.589036 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16127): Terminating (SIGTERM) 03:04:21.629920 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16130): Terminating (SIGTERM) 03:04:21.670902 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16133): Terminating (SIGTERM) 03:04:21.680560 --- ParallelTerminationStrategy: PID 16121 died... 03:04:21.735550 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16121): Terminated: ok {rc=0} 03:04:21.745678 --- ParallelTerminationStrategy: PID 16122 died... 03:04:21.800250 run iperf3-srv_10.42.42.10(pid=16122): Terminated {rc=256} 03:04:21.810273 --- ParallelTerminationStrategy: PID 16123 died... 03:04:21.864997 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16123): Terminated: ok {rc=0} 03:04:21.874921 --- ParallelTerminationStrategy: PID 16124 died... 03:04:21.929877 run iperf3-srv_10.42.42.10(pid=16124): Terminated {rc=256} 03:04:21.939881 --- ParallelTerminationStrategy: PID 16127 died... 03:04:21.994618 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16127): Terminated: ok {rc=0} 03:04:22.004675 --- ParallelTerminationStrategy: PID 16130 died... 03:04:22.059566 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16130): Terminated: ok {rc=0} 03:04:22.069696 --- ParallelTerminationStrategy: PID 16133 died... 03:04:22.124452 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16133): Terminated: ok {rc=0} 03:04:22.210490 bus /gobi_0: Setting Powered False 03:04:23.316353 bus /gobi_0: Setting Powered False 03:04:24.422344 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16131): Process ended prematurely: osmo-stp_10.42.42.5(pid=16131) [trial-2353↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16131)]