Failed
gprs:trx-lms.cs_paging_gprs_active.py (from gprs_trx-lms)
Stacktrace
osmo-stp_10.42.42.5(pid=15541): Process ended prematurely: osmo-stp_10.42.42.5(pid=15541) [trial-2353↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15541)]
Standard Output
---------------------------------------------- trial-2353 gprs:trx-lms cs_paging_gprs_active.py ---------------------------------------------- 02:56:22.789976 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 02:56:22.800920 tst gprs:trx-lms: Using 1 x bts (candidates: 1) 02:56:22.943934 tst cs_paging_gprs_active.py: using LAC 18583 02:56:23.069657 tst cs_paging_gprs_active.py: using RAC 223 02:56:23.197866 tst cs_paging_gprs_active.py: using CellId 18583 02:56:23.323011 tst cs_paging_gprs_active.py: using BVCI 18584 02:56:23.347549 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 02:56:23.358703 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 02:56:23.370091 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 02:56:23.381185 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 02:56:23.392113 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 02:56:23.403205 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 02:56:23.414444 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 02:56:23.425263 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 02:56:23.436357 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 02:56:23.556609 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 02:56:23.833483 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:56:23.958404 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:56:24.268278 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15531): Launched 02:56:24.524860 run iperf3-srv_10.42.42.10(pid=15532): Launched 02:56:24.706772 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:56:24.830721 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:56:25.148090 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15533): Launched 02:56:25.403775 run iperf3-srv_10.42.42.10(pid=15534): Launched 02:56:25.584864 tst cs_paging_gprs_active.py:38: start network... 02:56:25.708355 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:56:26.178720 run create_hlr_db(pid=15535): Launched 02:56:26.349813 bus /sierra_2: Setting Powered False 02:56:27.372539 run create_hlr_db(pid=15535): Terminated: ok {rc=0} 02:56:27.769608 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15537): Launched 02:56:28.068113 run osmo-hlr_10.42.42.2(pid=15538): Launched 02:56:28.177187 run osmo-stp_10.42.42.5: Starting osmo-stp 02:56:28.692474 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15540): Launched 02:56:28.990391 run osmo-stp_10.42.42.5(pid=15541): Launched 02:56:29.099599 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:56:29.617697 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15543): Launched 02:56:29.723340 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:56:29.981696 run patchelf(pid=15544): Launched 02:56:30.155267 run osmo-stp_10.42.42.5(pid=15541): ERR: Terminated: ERROR {rc=1} [trial-2353↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15541)] 02:56:30.283384 run osmo-stp_10.42.42.5(pid=15541): stdout: | (launched: 2022-12-09_02:56:28.843619) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:56:30.411037 run osmo-stp_10.42.42.5(pid=15541): stderr: | �[0;m�[38;5;43m20221209025629013 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209025629013 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209025629014 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209025629014 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209025629016 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209025629016 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209025629017 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:56:30.534817 run osmo-stp_10.42.42.5(pid=15541): stdout: | (launched: 2022-12-09_02:56:28.843619) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:56:30.656596 run osmo-stp_10.42.42.5(pid=15541): stderr: | �[0;m�[38;5;43m20221209025629013 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209025629013 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209025629014 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209025629014 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209025629016 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209025629016 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209025629017 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:56:30.799062 run patchelf(pid=15544): Terminating (SIGINT) 02:56:30.998383 run patchelf(pid=15544): Terminated: ok {rc=0} 02:56:31.032789 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=15541): Process ended prematurely: osmo-stp_10.42.42.5(pid=15541) [trial-2353↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15541)] [trial-2353↪gprs:trx-lms↪cs_paging_gprs_active.py:38] 02:56:31.043881 tst cs_paging_gprs_active.py:38: Test FAILED (8.3 sec) 02:56:31.111280 run osmo-hlr_10.42.42.2(pid=15538): ERR: Terminated: ERROR {rc=237} [trial-2353↪gprs:trx-lms↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15538)] 02:56:31.166671 run osmo-hlr_10.42.42.2(pid=15538): stdout: | (launched: 2022-12-09_02:56:27.920829) 02:56:31.223056 run osmo-hlr_10.42.42.2(pid=15538): stderr: | �[0;m�[1;31m20221209025628098 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209025628098 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209025628098 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209025628098 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209025628098 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209025628098 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209025628112 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:trx-lms/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209025628122 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209025628122 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209025628122 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:56:31.270748 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15531): Terminating (SIGTERM) 02:56:31.316801 run iperf3-srv_10.42.42.10(pid=15532): Terminating (SIGTERM) 02:56:31.365202 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15533): Terminating (SIGTERM) 02:56:31.410602 run iperf3-srv_10.42.42.10(pid=15534): Terminating (SIGTERM) 02:56:31.455912 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15537): Terminating (SIGTERM) 02:56:31.502853 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15540): Terminating (SIGTERM) 02:56:31.549424 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15543): Terminating (SIGTERM) 02:56:31.560380 --- ParallelTerminationStrategy: PID 15531 died... 02:56:31.622022 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15531): Terminated: ok {rc=0} 02:56:31.633086 --- ParallelTerminationStrategy: PID 15532 died... 02:56:31.693293 run iperf3-srv_10.42.42.10(pid=15532): Terminated {rc=256} 02:56:31.704385 --- ParallelTerminationStrategy: PID 15533 died... 02:56:31.764600 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15533): Terminated: ok {rc=0} 02:56:31.775700 --- ParallelTerminationStrategy: PID 15534 died... 02:56:31.833345 run iperf3-srv_10.42.42.10(pid=15534): Terminated {rc=256} 02:56:31.844193 --- ParallelTerminationStrategy: PID 15537 died... 02:56:31.901093 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15537): Terminated: ok {rc=0} 02:56:31.911934 --- ParallelTerminationStrategy: PID 15540 died... 02:56:31.972315 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15540): Terminated: ok {rc=0} 02:56:31.983289 --- ParallelTerminationStrategy: PID 15543 died... 02:56:32.040284 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15543): Terminated: ok {rc=0} 02:56:32.132266 bus /gobi_0: Setting Powered False 02:56:33.234524 bus /gobi_0: Setting Powered False 02:56:34.344726 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15541): Process ended prematurely: osmo-stp_10.42.42.5(pid=15541) [trial-2353↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15541)]