Failed
gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=2220): Process ended prematurely: osmo-stp_10.42.42.5(pid=2220) [trial-2355↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2220)]
Standard Output
---------------------------------------------- trial-2355 gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 06:27:16.823005 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:27:16.835787 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 06:27:17.024506 tst cs_paging_gprs_active.py: using LAC 19562 06:27:17.148113 tst cs_paging_gprs_active.py: using RAC 182 06:27:17.274098 tst cs_paging_gprs_active.py: using CellId 19562 06:27:17.397811 tst cs_paging_gprs_active.py: using BVCI 19563 06:27:17.422277 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:27:17.433816 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:27:17.445169 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:27:17.457050 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:27:17.468800 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:27:17.481949 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:27:17.493672 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:27:17.505706 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:27:17.517846 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 06:27:17.635784 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 06:27:17.908426 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 06:27:18.031447 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:27:18.338095 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2210): Launched 06:27:18.592328 run iperf3-srv_10.42.42.10(pid=2211): Launched 06:27:18.771951 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 06:27:18.894849 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:27:19.199740 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2212): Launched 06:27:19.453607 run iperf3-srv_10.42.42.10(pid=2213): Launched 06:27:19.633296 tst cs_paging_gprs_active.py:38: start network... 06:27:19.755459 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:27:20.221088 run create_hlr_db(pid=2214): Launched 06:27:20.390795 bus /gobi_6: Setting Powered False 06:27:21.413535 run create_hlr_db(pid=2214): Terminated: ok {rc=0} 06:27:21.808718 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2216): Launched 06:27:22.105693 run osmo-hlr_10.42.42.2(pid=2217): Launched 06:27:22.213093 run osmo-stp_10.42.42.5: Starting osmo-stp 06:27:22.724817 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2219): Launched 06:27:23.021144 run osmo-stp_10.42.42.5(pid=2220): Launched 06:27:23.129643 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:27:23.646061 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2222): Launched 06:27:23.751188 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:27:24.014439 run patchelf(pid=2223): Launched 06:27:24.189480 run osmo-stp_10.42.42.5(pid=2220): ERR: Terminated: ERROR {rc=1} [trial-2355↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2220)] 06:27:24.317199 run osmo-stp_10.42.42.5(pid=2220): stdout: | (launched: 2022-12-09_06:27:22.874879) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:27:24.445441 run osmo-stp_10.42.42.5(pid=2220): stderr: | �[0;m�[38;5;43m20221209062723044 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209062723044 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209062723044 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209062723045 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209062723045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209062723045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209062723046 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:27:24.569291 run osmo-stp_10.42.42.5(pid=2220): stdout: | (launched: 2022-12-09_06:27:22.874879) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:27:24.692008 run osmo-stp_10.42.42.5(pid=2220): stderr: | �[0;m�[38;5;43m20221209062723044 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209062723044 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209062723044 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209062723045 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209062723045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209062723045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209062723046 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:27:24.834772 run patchelf(pid=2223): Terminating (SIGINT) 06:27:25.002895 run patchelf(pid=2223): Terminated: ok {rc=0} 06:27:25.033863 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=2220): Process ended prematurely: osmo-stp_10.42.42.5(pid=2220) [trial-2355↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2220)] [trial-2355↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 06:27:25.042997 tst cs_paging_gprs_active.py:38: Test FAILED (8.3 sec) 06:27:25.104534 run osmo-hlr_10.42.42.2(pid=2217): ERR: Terminated: ERROR {rc=237} [trial-2355↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2217)] 06:27:25.154095 run osmo-hlr_10.42.42.2(pid=2217): stdout: | (launched: 2022-12-09_06:27:21.959416) 06:27:25.203952 run osmo-hlr_10.42.42.2(pid=2217): stderr: | �[0;m�[1;31m20221209062722135 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209062722135 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209062722135 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209062722135 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209062722135 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209062722136 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209062722151 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2355/run.2022-12-09_05-28-02/gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209062722161 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209062722161 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209062722161 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:27:25.246576 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2210): Terminating (SIGTERM) 06:27:25.287156 run iperf3-srv_10.42.42.10(pid=2211): Terminating (SIGTERM) 06:27:25.327565 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2212): Terminating (SIGTERM) 06:27:25.367846 run iperf3-srv_10.42.42.10(pid=2213): Terminating (SIGTERM) 06:27:25.408097 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2216): Terminating (SIGTERM) 06:27:25.448775 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2219): Terminating (SIGTERM) 06:27:25.489567 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2222): Terminating (SIGTERM) 06:27:25.499274 --- ParallelTerminationStrategy: PID 2210 died... 06:27:25.553095 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2210): Terminated: ok {rc=0} 06:27:25.563260 --- ParallelTerminationStrategy: PID 2211 died... 06:27:25.616578 run iperf3-srv_10.42.42.10(pid=2211): Terminated {rc=256} 06:27:25.626523 --- ParallelTerminationStrategy: PID 2212 died... 06:27:25.679638 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2212): Terminated: ok {rc=0} 06:27:25.689847 --- ParallelTerminationStrategy: PID 2213 died... 06:27:25.743167 run iperf3-srv_10.42.42.10(pid=2213): Terminated {rc=256} 06:27:25.753311 --- ParallelTerminationStrategy: PID 2216 died... 06:27:25.806726 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2216): Terminated: ok {rc=0} 06:27:25.816371 --- ParallelTerminationStrategy: PID 2219 died... 06:27:25.869735 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2219): Terminated: ok {rc=0} 06:27:25.879331 --- ParallelTerminationStrategy: PID 2222 died... 06:27:25.932343 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2222): Terminated: ok {rc=0} 06:27:26.020888 bus /gobi_0: Setting Powered False 06:27:27.123822 bus /gobi_0: Setting Powered False 06:27:28.235495 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2220): Process ended prematurely: osmo-stp_10.42.42.5(pid=2220) [trial-2355↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2220)]