Failed
gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=803): Process ended prematurely: osmo-stp_10.42.42.5(pid=803) [trial-2355↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=803)]
Standard Output
---------------------------------------------- trial-2355 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 06:11:40.139814 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:11:40.150908 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 06:11:40.288227 tst cs_paging_gprs_active.py: using LAC 19478 06:11:40.420797 tst cs_paging_gprs_active.py: using RAC 98 06:11:40.556746 tst cs_paging_gprs_active.py: using CellId 19478 06:11:40.681611 tst cs_paging_gprs_active.py: using BVCI 19479 06:11:40.706099 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:11:40.717786 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:11:40.729289 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:11:40.741554 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:11:40.754123 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:11:40.765411 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:11:40.777341 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:11:40.789258 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:11:40.801282 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 06:11:40.919041 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 06:11:41.194185 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 06:11:41.318321 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:11:41.623157 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=793): Launched 06:11:41.876445 run iperf3-srv_10.42.42.10(pid=794): Launched 06:11:42.055765 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 06:11:42.179175 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:11:42.484434 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=795): Launched 06:11:42.737729 run iperf3-srv_10.42.42.10(pid=796): Launched 06:11:42.916940 tst cs_paging_gprs_active.py:38: start network... 06:11:43.040024 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:11:43.507254 run create_hlr_db(pid=797): Launched 06:11:43.678039 bus /gobi_6: Setting Powered False 06:11:44.700195 run create_hlr_db(pid=797): Terminated: ok {rc=0} 06:11:45.120355 run pcap-recorder_any(filters='host 10.42.42.2')(pid=799): Launched 06:11:45.437370 run osmo-hlr_10.42.42.2(pid=800): Launched 06:11:45.553850 run osmo-stp_10.42.42.5: Starting osmo-stp 06:11:46.145047 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=802): Launched 06:11:46.595134 run osmo-stp_10.42.42.5(pid=803): Launched 06:11:46.746571 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:11:47.308384 run pcap-recorder_any(filters='host 10.42.42.6')(pid=805): Launched 06:11:47.421611 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:11:47.696440 run patchelf(pid=806): Launched 06:11:47.882214 run osmo-stp_10.42.42.5(pid=803): ERR: Terminated: ERROR {rc=1} [trial-2355↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=803)] 06:11:48.017663 run osmo-stp_10.42.42.5(pid=803): stdout: | (launched: 2022-12-09_06:11:46.309714) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:11:48.154483 run osmo-stp_10.42.42.5(pid=803): stderr: | �[0;m�[38;5;43m20221209061146551 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209061146551 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209061146551 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209061146551 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209061146552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209061146552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209061146552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:11:48.286430 run osmo-stp_10.42.42.5(pid=803): stdout: | (launched: 2022-12-09_06:11:46.309714) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:11:48.416696 run osmo-stp_10.42.42.5(pid=803): stderr: | �[0;m�[38;5;43m20221209061146551 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209061146551 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209061146551 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209061146551 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209061146552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209061146552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209061146552 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:11:48.567942 run patchelf(pid=806): Terminating (SIGINT) 06:11:48.745230 run patchelf(pid=806): Terminated: ok {rc=0} 06:11:48.777786 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=803): Process ended prematurely: osmo-stp_10.42.42.5(pid=803) [trial-2355↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=803)] [trial-2355↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 06:11:48.787405 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 06:11:48.850359 run osmo-hlr_10.42.42.2(pid=800): ERR: Terminated: ERROR {rc=237} [trial-2355↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=800)] 06:11:48.901718 run osmo-hlr_10.42.42.2(pid=800): stdout: | (launched: 2022-12-09_06:11:45.282454) 06:11:48.953844 run osmo-hlr_10.42.42.2(pid=800): stderr: | �[0;m�[1;31m20221209061145479 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209061145479 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209061145479 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209061145479 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209061145479 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209061145479 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209061145490 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2355/run.2022-12-09_05-28-02/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209061145498 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209061145498 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209061145498 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:11:48.998435 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=793): Terminating (SIGTERM) 06:11:49.040604 run iperf3-srv_10.42.42.10(pid=794): Terminating (SIGTERM) 06:11:49.082943 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=795): Terminating (SIGTERM) 06:11:49.124929 run iperf3-srv_10.42.42.10(pid=796): Terminating (SIGTERM) 06:11:49.167096 run pcap-recorder_any(filters='host 10.42.42.2')(pid=799): Terminating (SIGTERM) 06:11:49.209248 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=802): Terminating (SIGTERM) 06:11:49.251379 run pcap-recorder_any(filters='host 10.42.42.6')(pid=805): Terminating (SIGTERM) 06:11:49.261126 --- ParallelTerminationStrategy: PID 793 died... 06:11:49.317545 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=793): Terminated: ok {rc=0} 06:11:49.327828 --- ParallelTerminationStrategy: PID 794 died... 06:11:49.383590 run iperf3-srv_10.42.42.10(pid=794): Terminated {rc=256} 06:11:49.393965 --- ParallelTerminationStrategy: PID 795 died... 06:11:49.449488 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=795): Terminated: ok {rc=0} 06:11:49.459437 --- ParallelTerminationStrategy: PID 796 died... 06:11:49.514962 run iperf3-srv_10.42.42.10(pid=796): Terminated {rc=256} 06:11:49.525072 --- ParallelTerminationStrategy: PID 799 died... 06:11:49.580860 run pcap-recorder_any(filters='host 10.42.42.2')(pid=799): Terminated: ok {rc=0} 06:11:49.591030 --- ParallelTerminationStrategy: PID 802 died... 06:11:49.646722 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=802): Terminated: ok {rc=0} 06:11:49.656662 --- ParallelTerminationStrategy: PID 805 died... 06:11:49.713449 run pcap-recorder_any(filters='host 10.42.42.6')(pid=805): Terminated: ok {rc=0} 06:11:49.800899 bus /gobi_0: Setting Powered False 06:11:50.906970 bus /gobi_0: Setting Powered False 06:11:52.018021 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=803): Process ended prematurely: osmo-stp_10.42.42.5(pid=803) [trial-2355↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=803)]