Failed
dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any.switch_tch_pdch.py (from dynts_nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any)
Stacktrace
osmo-stp_10.42.42.5(pid=11580): Process ended prematurely: osmo-stp_10.42.42.5(pid=11580) [trial-2356↪dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11580)]
Standard Output
---------------------------------------------- trial-2356 dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any switch_tch_pdch.py ---------------------------------------------- 08:09:03.220886 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 08:09:03.233230 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x bts (candidates: 1) 08:09:03.395692 tst switch_tch_pdch.py: using LAC 20099 08:09:03.517859 tst switch_tch_pdch.py: using RAC 209 08:09:03.637770 tst switch_tch_pdch.py: using CellId 20099 08:09:03.756775 tst switch_tch_pdch.py: using BVCI 20100 08:09:03.780620 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 08:09:03.793229 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 08:09:03.805133 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 08:09:03.816906 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 08:09:03.828516 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 08:09:03.839931 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 08:09:03.851614 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 08:09:03.863987 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 08:09:03.990897 tst dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 08:09:04.287938 tst switch_tch_pdch.py:51: start network... 08:09:04.423479 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:09:04.938001 run create_hlr_db(pid=11574): Launched 08:09:05.126872 bus /gobi_6: Setting Powered False 08:09:06.147157 run create_hlr_db(pid=11574): Terminated: ok {rc=0} 08:09:06.581102 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11576): Launched 08:09:06.909348 run osmo-hlr_10.42.42.2(pid=11577): Launched 08:09:07.031451 run osmo-stp_10.42.42.5: Starting osmo-stp 08:09:07.599184 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11579): Launched 08:09:07.926415 run osmo-stp_10.42.42.5(pid=11580): Launched 08:09:08.044868 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:09:08.614910 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11582): Launched 08:09:08.730800 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:09:09.017673 run patchelf(pid=11583): Launched 08:09:09.208222 run osmo-stp_10.42.42.5(pid=11580): ERR: Terminated: ERROR {rc=1} [trial-2356↪dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11580)] 08:09:09.347325 run osmo-stp_10.42.42.5(pid=11580): stdout: | (launched: 2022-12-09_08:09:07.764060) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:09:09.486909 run osmo-stp_10.42.42.5(pid=11580): stderr: | �[0;m�[38;5;43m20221209080907957 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209080907958 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209080907958 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209080907958 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209080907959 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209080907959 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209080907959 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:09:09.621390 run osmo-stp_10.42.42.5(pid=11580): stdout: | (launched: 2022-12-09_08:09:07.764060) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:09:09.755161 run osmo-stp_10.42.42.5(pid=11580): stderr: | �[0;m�[38;5;43m20221209080907957 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209080907958 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209080907958 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209080907958 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209080907959 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209080907959 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209080907959 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:09:09.910825 run patchelf(pid=11583): Terminating (SIGINT) 08:09:10.092315 run patchelf(pid=11583): Terminated: ok {rc=0} 08:09:10.125703 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=11580): Process ended prematurely: osmo-stp_10.42.42.5(pid=11580) [trial-2356↪dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11580)] [trial-2356↪dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54] 08:09:10.135328 tst switch_tch_pdch.py:54: Test FAILED (6.9 sec) 08:09:10.198369 run osmo-hlr_10.42.42.2(pid=11577): ERR: Terminated: ERROR {rc=237} [trial-2356↪dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11577)] 08:09:10.250624 run osmo-hlr_10.42.42.2(pid=11577): stdout: | (launched: 2022-12-09_08:09:06.746069) 08:09:10.303304 run osmo-hlr_10.42.42.2(pid=11577): stderr: | �[0;m�[1;31m20221209080906944 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209080906944 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209080906944 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209080906944 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209080906944 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209080906944 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209080906958 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2356/run.2022-12-09_06-55-12/dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209080906966 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209080906966 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209080906966 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:09:10.348420 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11576): Terminating (SIGTERM) 08:09:10.391080 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11579): Terminating (SIGTERM) 08:09:10.433534 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11582): Terminating (SIGTERM) 08:09:10.443179 --- ParallelTerminationStrategy: PID 11576 died... 08:09:10.499665 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11576): Terminated: ok {rc=0} 08:09:10.509679 --- ParallelTerminationStrategy: PID 11579 died... 08:09:10.566248 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11579): Terminated: ok {rc=0} 08:09:10.576294 --- ParallelTerminationStrategy: PID 11582 died... 08:09:10.632689 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11582): Terminated: ok {rc=0} 08:09:10.720911 bus /gobi_0: Setting Powered False 08:09:11.829132 bus /gobi_0: Setting Powered False 08:09:12.940768 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11580): Process ended prematurely: osmo-stp_10.42.42.5(pid=11580) [trial-2356↪dynts:nanobts+band-900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11580)]