Failed
gprs:nanobts+band-1900.cs_paging_gprs_active.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=10567): Process ended prematurely: osmo-stp_10.42.42.5(pid=10567) [trial-2356↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10567)]
Standard Output
---------------------------------------------- trial-2356 gprs:nanobts+band-1900 cs_paging_gprs_active.py ---------------------------------------------- 07:58:47.511076 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 07:58:47.522766 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 07:58:47.657800 tst cs_paging_gprs_active.py: using LAC 20046 07:58:47.786192 tst cs_paging_gprs_active.py: using RAC 156 07:58:47.913281 tst cs_paging_gprs_active.py: using CellId 20046 07:58:48.041866 tst cs_paging_gprs_active.py: using BVCI 20047 07:58:48.066805 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 07:58:48.078275 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 07:58:48.089410 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 07:58:48.100479 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 07:58:48.111496 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 07:58:48.122570 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 07:58:48.133888 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 07:58:48.144793 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 07:58:48.155980 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 07:58:48.274305 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 07:58:48.555034 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:58:48.682147 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:58:48.995771 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10557): Launched 07:58:49.257554 run iperf3-srv_10.42.42.10(pid=10558): Launched 07:58:49.442556 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:58:49.568921 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:58:49.883869 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10559): Launched 07:58:50.144940 run iperf3-srv_10.42.42.10(pid=10560): Launched 07:58:50.329944 tst cs_paging_gprs_active.py:38: start network... 07:58:50.456616 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:58:50.934819 run create_hlr_db(pid=10561): Launched 07:58:51.110306 bus /sierra_2: Setting Powered False 07:58:52.131799 run create_hlr_db(pid=10561): Terminated: ok {rc=0} 07:58:52.534977 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10563): Launched 07:58:52.840041 run osmo-hlr_10.42.42.2(pid=10564): Launched 07:58:52.958217 run osmo-stp_10.42.42.5: Starting osmo-stp 07:58:53.492333 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10566): Launched 07:58:53.796660 run osmo-stp_10.42.42.5(pid=10567): Launched 07:58:53.907367 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:58:54.437204 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10569): Launched 07:58:54.546501 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:58:54.813197 run patchelf(pid=10570): Launched 07:58:54.991368 run osmo-stp_10.42.42.5(pid=10567): ERR: Terminated: ERROR {rc=1} [trial-2356↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10567)] 07:58:55.121969 run osmo-stp_10.42.42.5(pid=10567): stdout: | (launched: 2022-12-09_07:58:53.646830) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:58:55.252710 run osmo-stp_10.42.42.5(pid=10567): stderr: | �[0;m�[38;5;43m20221209075853813 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209075853813 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209075853813 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209075853814 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209075853814 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209075853814 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209075853814 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:58:55.379174 run osmo-stp_10.42.42.5(pid=10567): stdout: | (launched: 2022-12-09_07:58:53.646830) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:58:55.504341 run osmo-stp_10.42.42.5(pid=10567): stderr: | �[0;m�[38;5;43m20221209075853813 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209075853813 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209075853813 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209075853814 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209075853814 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209075853814 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209075853814 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:58:55.649637 run patchelf(pid=10570): Terminating (SIGINT) 07:58:55.820449 run patchelf(pid=10570): Terminated: ok {rc=0} 07:58:55.851908 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10567): Process ended prematurely: osmo-stp_10.42.42.5(pid=10567) [trial-2356↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10567)] [trial-2356↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38] 07:58:55.861214 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 07:58:55.922107 run osmo-hlr_10.42.42.2(pid=10564): ERR: Terminated: ERROR {rc=237} [trial-2356↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10564)] 07:58:55.971301 run osmo-hlr_10.42.42.2(pid=10564): stdout: | (launched: 2022-12-09_07:58:52.689335) 07:58:56.021356 run osmo-hlr_10.42.42.2(pid=10564): stderr: | �[0;m�[1;31m20221209075852863 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209075852863 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209075852863 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209075852863 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209075852863 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209075852863 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209075852875 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2356/run.2022-12-09_06-55-12/gprs:nanobts+band-1900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209075852883 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209075852884 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209075852884 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:58:56.063174 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10557): Terminating (SIGTERM) 07:58:56.102815 run iperf3-srv_10.42.42.10(pid=10558): Terminating (SIGTERM) 07:58:56.142588 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10559): Terminating (SIGTERM) 07:58:56.182201 run iperf3-srv_10.42.42.10(pid=10560): Terminating (SIGTERM) 07:58:56.221943 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10563): Terminating (SIGTERM) 07:58:56.261669 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10566): Terminating (SIGTERM) 07:58:56.301442 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10569): Terminating (SIGTERM) 07:58:56.311012 --- ParallelTerminationStrategy: PID 10557 died... 07:58:56.364229 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10557): Terminated: ok {rc=0} 07:58:56.374189 --- ParallelTerminationStrategy: PID 10558 died... 07:58:56.426568 run iperf3-srv_10.42.42.10(pid=10558): Terminated {rc=256} 07:58:56.436359 --- ParallelTerminationStrategy: PID 10559 died... 07:58:56.488409 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10559): Terminated: ok {rc=0} 07:58:56.498414 --- ParallelTerminationStrategy: PID 10560 died... 07:58:56.550719 run iperf3-srv_10.42.42.10(pid=10560): Terminated {rc=256} 07:58:56.560628 --- ParallelTerminationStrategy: PID 10563 died... 07:58:56.613190 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10563): Terminated: ok {rc=0} 07:58:56.622892 --- ParallelTerminationStrategy: PID 10566 died... 07:58:56.675499 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10566): Terminated: ok {rc=0} 07:58:56.685521 --- ParallelTerminationStrategy: PID 10569 died... 07:58:56.738897 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10569): Terminated: ok {rc=0} 07:58:56.822554 bus /gobi_0: Setting Powered False 07:58:57.929807 bus /gobi_0: Setting Powered False 07:58:59.040839 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10567): Process ended prematurely: osmo-stp_10.42.42.5(pid=10567) [trial-2356↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10567)]