Failed
gprs:nanobts+band-900.cs_paging_gprs_active.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=11039): Process ended prematurely: osmo-stp_10.42.42.5(pid=11039) [trial-2356↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11039)]
Standard Output
---------------------------------------------- trial-2356 gprs:nanobts+band-900 cs_paging_gprs_active.py ---------------------------------------------- 08:04:59.929614 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 08:04:59.940457 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 08:05:00.081823 tst cs_paging_gprs_active.py: using LAC 20079 08:05:00.200198 tst cs_paging_gprs_active.py: using RAC 189 08:05:00.320095 tst cs_paging_gprs_active.py: using CellId 20079 08:05:00.446456 tst cs_paging_gprs_active.py: using BVCI 20080 08:05:00.471834 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 08:05:00.483404 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 08:05:00.494741 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 08:05:00.506323 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 08:05:00.517658 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 08:05:00.529083 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 08:05:00.540648 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 08:05:00.552075 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 08:05:00.563828 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 08:05:00.682186 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 08:05:00.988821 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:05:01.120037 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:05:01.456531 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11007): Launched 08:05:01.758076 run iperf3-srv_10.42.42.10(pid=11009): Launched 08:05:01.949188 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:05:02.080779 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:05:02.401922 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11012): Launched 08:05:02.665421 run iperf3-srv_10.42.42.10(pid=11013): Launched 08:05:02.851342 tst cs_paging_gprs_active.py:38: start network... 08:05:02.978616 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:05:03.466950 run create_hlr_db(pid=11014): Launched 08:05:03.656507 bus /sierra_2: Setting Powered False 08:05:04.678013 run create_hlr_db(pid=11014): Terminated: ok {rc=0} 08:05:05.112128 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11016): Launched 08:05:05.440906 run osmo-hlr_10.42.42.2(pid=11035): Launched 08:05:05.565722 run osmo-stp_10.42.42.5: Starting osmo-stp 08:05:06.136146 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11038): Launched 08:05:06.465022 run osmo-stp_10.42.42.5(pid=11039): Launched 08:05:06.583276 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:05:07.154420 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11041): Launched 08:05:07.271971 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:05:07.557165 run patchelf(pid=11042): Launched 08:05:07.748640 run osmo-stp_10.42.42.5(pid=11039): ERR: Terminated: ERROR {rc=1} [trial-2356↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11039)] 08:05:07.888050 run osmo-stp_10.42.42.5(pid=11039): stdout: | (launched: 2022-12-09_08:05:06.303205) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:05:08.027852 run osmo-stp_10.42.42.5(pid=11039): stderr: | �[0;m�[38;5;43m20221209080506495 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209080506495 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209080506495 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209080506496 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209080506496 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209080506496 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209080506496 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:05:08.163879 run osmo-stp_10.42.42.5(pid=11039): stdout: | (launched: 2022-12-09_08:05:06.303205) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:05:08.298273 run osmo-stp_10.42.42.5(pid=11039): stderr: | �[0;m�[38;5;43m20221209080506495 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209080506495 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209080506495 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209080506496 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209080506496 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209080506496 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209080506496 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:05:08.453867 run patchelf(pid=11042): Terminating (SIGINT) 08:05:08.636393 run patchelf(pid=11042): Terminated: ok {rc=0} 08:05:08.670371 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11039): Process ended prematurely: osmo-stp_10.42.42.5(pid=11039) [trial-2356↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11039)] [trial-2356↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38] 08:05:08.680393 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 08:05:08.745234 run osmo-hlr_10.42.42.2(pid=11035): ERR: Terminated: ERROR {rc=237} [trial-2356↪gprs:nanobts+band-900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11035)] 08:05:08.796773 run osmo-hlr_10.42.42.2(pid=11035): stdout: | (launched: 2022-12-09_08:05:05.279102) 08:05:08.849084 run osmo-hlr_10.42.42.2(pid=11035): stderr: | �[0;m�[1;31m20221209080505475 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209080505475 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209080505475 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209080505475 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209080505475 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209080505475 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209080505488 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2356/run.2022-12-09_06-55-12/gprs:nanobts+band-900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209080505496 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209080505497 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209080505497 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:05:08.892781 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11007): Terminating (SIGTERM) 08:05:08.934742 run iperf3-srv_10.42.42.10(pid=11009): Terminating (SIGTERM) 08:05:08.976466 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11012): Terminating (SIGTERM) 08:05:09.018372 run iperf3-srv_10.42.42.10(pid=11013): Terminating (SIGTERM) 08:05:09.060616 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11016): Terminating (SIGTERM) 08:05:09.102634 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11038): Terminating (SIGTERM) 08:05:09.144313 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11041): Terminating (SIGTERM) 08:05:09.154554 --- ParallelTerminationStrategy: PID 11007 died... 08:05:09.210751 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11007): Terminated: ok {rc=0} 08:05:09.220856 --- ParallelTerminationStrategy: PID 11009 died... 08:05:09.276297 run iperf3-srv_10.42.42.10(pid=11009): Terminated {rc=256} 08:05:09.286806 --- ParallelTerminationStrategy: PID 11012 died... 08:05:09.342580 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11012): Terminated: ok {rc=0} 08:05:09.352399 --- ParallelTerminationStrategy: PID 11013 died... 08:05:09.407737 run iperf3-srv_10.42.42.10(pid=11013): Terminated {rc=256} 08:05:09.417932 --- ParallelTerminationStrategy: PID 11016 died... 08:05:09.473252 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11016): Terminated: ok {rc=0} 08:05:09.483486 --- ParallelTerminationStrategy: PID 11038 died... 08:05:09.538892 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11038): Terminated: ok {rc=0} 08:05:09.549066 --- ParallelTerminationStrategy: PID 11041 died... 08:05:09.604709 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11041): Terminated: ok {rc=0} 08:05:09.689634 bus /gobi_0: Setting Powered False 08:05:10.795689 bus /gobi_0: Setting Powered False 08:05:11.906819 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11039): Process ended prematurely: osmo-stp_10.42.42.5(pid=11039) [trial-2356↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11039)]