Failed
gprs:oc2g+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=6009): Process ended prematurely: osmo-stp_10.42.42.5(pid=6009) [trial-2356↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6009)]
Standard Output
---------------------------------------------- trial-2356 gprs:oc2g+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 07:12:59.098994 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:12:59.111366 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 07:12:59.264026 tst ping_idle_ping.py: using LAC 19801 07:12:59.383982 tst ping_idle_ping.py: using RAC 166 07:12:59.501483 tst ping_idle_ping.py: using CellId 19801 07:12:59.618622 tst ping_idle_ping.py: using BVCI 19802 07:12:59.642012 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:12:59.653092 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:12:59.663848 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:12:59.675118 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:12:59.686287 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:12:59.697289 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:12:59.708400 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:12:59.719609 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 07:12:59.996558 tst ping_idle_ping.py:24: start network... 07:13:00.123429 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:13:00.607959 run create_hlr_db(pid=6003): Launched 07:13:00.782070 bus /gobi_6: Setting Powered False 07:13:01.825029 run create_hlr_db(pid=6003): Terminated: ok {rc=0} 07:13:02.274828 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6005): Launched 07:13:02.600796 run osmo-hlr_10.42.42.2(pid=6006): Launched 07:13:02.719195 run osmo-stp_10.42.42.5: Starting osmo-stp 07:13:03.283720 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6008): Launched 07:13:03.609659 run osmo-stp_10.42.42.5(pid=6009): Launched 07:13:03.727954 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:13:04.295470 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6011): Launched 07:13:04.411129 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:13:04.703262 run patchelf(pid=6012): Launched 07:13:04.891844 run osmo-stp_10.42.42.5(pid=6009): ERR: Terminated: ERROR {rc=1} [trial-2356↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6009)] 07:13:05.029479 run osmo-stp_10.42.42.5(pid=6009): stdout: | (launched: 2022-12-09_07:13:03.448664) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:13:05.167766 run osmo-stp_10.42.42.5(pid=6009): stderr: | �[0;m�[38;5;43m20221209071303640 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209071303640 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209071303641 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209071303641 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209071303642 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209071303642 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209071303642 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:13:05.301737 run osmo-stp_10.42.42.5(pid=6009): stdout: | (launched: 2022-12-09_07:13:03.448664) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:13:05.434473 run osmo-stp_10.42.42.5(pid=6009): stderr: | �[0;m�[38;5;43m20221209071303640 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209071303640 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209071303641 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209071303641 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209071303642 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209071303642 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209071303642 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:13:05.587688 run patchelf(pid=6012): Terminating (SIGINT) 07:13:05.767326 run patchelf(pid=6012): Terminated: ok {rc=0} 07:13:05.800035 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=6009): Process ended prematurely: osmo-stp_10.42.42.5(pid=6009) [trial-2356↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6009)] [trial-2356↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 07:13:05.809502 tst ping_idle_ping.py:27: Test FAILED (6.7 sec) 07:13:05.872038 run osmo-hlr_10.42.42.2(pid=6006): ERR: Terminated: ERROR {rc=237} [trial-2356↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6006)] 07:13:05.923282 run osmo-hlr_10.42.42.2(pid=6006): stdout: | (launched: 2022-12-09_07:13:02.439524) 07:13:05.974987 run osmo-hlr_10.42.42.2(pid=6006): stderr: | �[0;m�[1;31m20221209071302637 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209071302637 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209071302637 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209071302637 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209071302637 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209071302637 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209071302651 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2356/run.2022-12-09_06-55-12/gprs:oc2g+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209071302659 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209071302659 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209071302659 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:13:06.019433 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6005): Terminating (SIGTERM) 07:13:06.061414 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6008): Terminating (SIGTERM) 07:13:06.103829 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6011): Terminating (SIGTERM) 07:13:06.113514 --- ParallelTerminationStrategy: PID 6005 died... 07:13:06.169327 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6005): Terminated: ok {rc=0} 07:13:06.179391 --- ParallelTerminationStrategy: PID 6008 died... 07:13:06.234938 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6008): Terminated: ok {rc=0} 07:13:06.245152 --- ParallelTerminationStrategy: PID 6011 died... 07:13:06.301164 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6011): Terminated: ok {rc=0} 07:13:06.388836 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6009): Process ended prematurely: osmo-stp_10.42.42.5(pid=6009) [trial-2356↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6009)]