Failed
gprs:trx-lms+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=8778): Process ended prematurely: osmo-stp_10.42.42.5(pid=8778) [trial-2356↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8778)]
Standard Output
---------------------------------------------- trial-2356 gprs:trx-lms+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 07:44:46.420988 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:44:46.432806 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 07:44:46.598785 tst cs_paging_gprs_active.py: using LAC 19971 07:44:46.738621 tst cs_paging_gprs_active.py: using RAC 81 07:44:46.868845 tst cs_paging_gprs_active.py: using CellId 19971 07:44:47.017446 tst cs_paging_gprs_active.py: using BVCI 19972 07:44:47.044203 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:44:47.056270 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:44:47.068550 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:44:47.080572 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:44:47.092482 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:44:47.104658 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:44:47.116766 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:44:47.128767 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:44:47.140779 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 07:44:47.265253 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 07:44:47.560114 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:44:47.695530 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:44:48.029812 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8768): Launched 07:44:48.309773 run iperf3-srv_10.42.42.10(pid=8769): Launched 07:44:48.508225 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:44:48.643491 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:44:48.977201 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8770): Launched 07:44:49.256660 run iperf3-srv_10.42.42.10(pid=8771): Launched 07:44:49.455142 tst cs_paging_gprs_active.py:38: start network... 07:44:49.590313 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:44:50.107972 run create_hlr_db(pid=8772): Launched 07:44:50.294738 bus /gobi_6: Setting Powered False 07:44:51.317709 run create_hlr_db(pid=8772): Terminated: ok {rc=0} 07:44:51.747289 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8774): Launched 07:44:52.071521 run osmo-hlr_10.42.42.2(pid=8775): Launched 07:44:52.187940 run osmo-stp_10.42.42.5: Starting osmo-stp 07:44:52.751219 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8777): Launched 07:44:53.075017 run osmo-stp_10.42.42.5(pid=8778): Launched 07:44:53.192395 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:44:53.755111 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8780): Launched 07:44:53.870740 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:44:54.153638 run patchelf(pid=8781): Launched 07:44:54.343494 run osmo-stp_10.42.42.5(pid=8778): ERR: Terminated: ERROR {rc=1} [trial-2356↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8778)] 07:44:54.481504 run osmo-stp_10.42.42.5(pid=8778): stdout: | (launched: 2022-12-09_07:44:52.915288) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:44:54.619369 run osmo-stp_10.42.42.5(pid=8778): stderr: | �[0;m�[38;5;43m20221209074453106 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209074453106 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209074453106 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209074453106 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209074453107 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209074453107 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209074453107 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:44:54.752791 run osmo-stp_10.42.42.5(pid=8778): stdout: | (launched: 2022-12-09_07:44:52.915288) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:44:54.884884 run osmo-stp_10.42.42.5(pid=8778): stderr: | �[0;m�[38;5;43m20221209074453106 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209074453106 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209074453106 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209074453106 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209074453107 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209074453107 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209074453107 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:44:55.038518 run patchelf(pid=8781): Terminating (SIGINT) 07:44:55.219216 run patchelf(pid=8781): Terminated: ok {rc=0} 07:44:55.252474 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=8778): Process ended prematurely: osmo-stp_10.42.42.5(pid=8778) [trial-2356↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8778)] [trial-2356↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 07:44:55.262494 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 07:44:55.325378 run osmo-hlr_10.42.42.2(pid=8775): ERR: Terminated: ERROR {rc=237} [trial-2356↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8775)] 07:44:55.376482 run osmo-hlr_10.42.42.2(pid=8775): stdout: | (launched: 2022-12-09_07:44:51.912447) 07:44:55.428258 run osmo-hlr_10.42.42.2(pid=8775): stderr: | �[0;m�[1;31m20221209074452109 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209074452109 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209074452109 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209074452109 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209074452109 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209074452109 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209074452122 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2356/run.2022-12-09_06-55-12/gprs:trx-lms+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209074452130 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209074452131 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209074452131 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:44:55.472361 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8768): Terminating (SIGTERM) 07:44:55.514078 run iperf3-srv_10.42.42.10(pid=8769): Terminating (SIGTERM) 07:44:55.555909 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8770): Terminating (SIGTERM) 07:44:55.597790 run iperf3-srv_10.42.42.10(pid=8771): Terminating (SIGTERM) 07:44:55.639764 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8774): Terminating (SIGTERM) 07:44:55.681747 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8777): Terminating (SIGTERM) 07:44:55.723702 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8780): Terminating (SIGTERM) 07:44:55.733509 --- ParallelTerminationStrategy: PID 8768 died... 07:44:55.789498 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8768): Terminated: ok {rc=0} 07:44:55.799688 --- ParallelTerminationStrategy: PID 8769 died... 07:44:55.855420 run iperf3-srv_10.42.42.10(pid=8769): Terminated {rc=256} 07:44:55.865623 --- ParallelTerminationStrategy: PID 8770 died... 07:44:55.921184 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8770): Terminated: ok {rc=0} 07:44:55.931175 --- ParallelTerminationStrategy: PID 8771 died... 07:44:55.986606 run iperf3-srv_10.42.42.10(pid=8771): Terminated {rc=256} 07:44:55.996738 --- ParallelTerminationStrategy: PID 8774 died... 07:44:56.052593 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8774): Terminated: ok {rc=0} 07:44:56.063171 --- ParallelTerminationStrategy: PID 8777 died... 07:44:56.119247 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8777): Terminated: ok {rc=0} 07:44:56.129489 --- ParallelTerminationStrategy: PID 8780 died... 07:44:56.185053 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8780): Terminated: ok {rc=0} 07:44:56.273190 bus /gobi_0: Setting Powered False 07:44:57.380184 bus /gobi_0: Setting Powered False 07:44:58.488556 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8778): Process ended prematurely: osmo-stp_10.42.42.5(pid=8778) [trial-2356↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8778)]