Failed
gprs:trx-umtrx+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_trx-umtrx+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=8007): Process ended prematurely: osmo-stp_10.42.42.5(pid=8007) [trial-2356↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8007)]
Standard Output
---------------------------------------------- trial-2356 gprs:trx-umtrx+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 07:37:45.324104 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:37:45.336879 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 07:37:45.501288 tst ping_idle_ping.py: using LAC 19933 07:37:45.627510 tst ping_idle_ping.py: using RAC 43 07:37:45.753389 tst ping_idle_ping.py: using CellId 19933 07:37:45.898431 tst ping_idle_ping.py: using BVCI 19934 07:37:45.924185 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:37:45.936218 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:37:45.948116 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:37:45.960122 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:37:45.972006 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:37:45.983864 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:37:45.996106 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 07:37:46.010437 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 07:37:46.303510 tst ping_idle_ping.py:24: start network... 07:37:46.434097 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:37:46.957101 run create_hlr_db(pid=8001): Launched 07:37:47.131945 bus /gobi_6: Setting Powered False 07:37:48.148836 run create_hlr_db(pid=8001): Terminated: ok {rc=0} 07:37:48.539893 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8003): Launched 07:37:48.832882 run osmo-hlr_10.42.42.2(pid=8004): Launched 07:37:48.945075 run osmo-stp_10.42.42.5: Starting osmo-stp 07:37:49.461743 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8006): Launched 07:37:49.758645 run osmo-stp_10.42.42.5(pid=8007): Launched 07:37:49.865556 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:37:50.377134 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8009): Launched 07:37:50.482051 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:37:50.737983 run patchelf(pid=8010): Launched 07:37:50.910458 run osmo-stp_10.42.42.5(pid=8007): ERR: Terminated: ERROR {rc=1} [trial-2356↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8007)] 07:37:51.036658 run osmo-stp_10.42.42.5(pid=8007): stdout: | (launched: 2022-12-09_07:37:49.612272) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:37:51.163551 run osmo-stp_10.42.42.5(pid=8007): stderr: | �[0;m�[38;5;43m20221209073749778 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209073749778 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209073749778 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209073749779 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209073749779 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209073749779 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209073749779 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:37:51.285616 run osmo-stp_10.42.42.5(pid=8007): stdout: | (launched: 2022-12-09_07:37:49.612272) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:37:51.406605 run osmo-stp_10.42.42.5(pid=8007): stderr: | �[0;m�[38;5;43m20221209073749778 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209073749778 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209073749778 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209073749779 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209073749779 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209073749779 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209073749779 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:37:51.547480 run patchelf(pid=8010): Terminating (SIGINT) 07:37:51.711821 run patchelf(pid=8010): Terminated: ok {rc=0} 07:37:51.742543 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=8007): Process ended prematurely: osmo-stp_10.42.42.5(pid=8007) [trial-2356↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8007)] [trial-2356↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 07:37:51.751239 tst ping_idle_ping.py:27: Test FAILED (6.4 sec) 07:37:51.810368 run osmo-hlr_10.42.42.2(pid=8004): ERR: Terminated: ERROR {rc=237} [trial-2356↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8004)] 07:37:51.859123 run osmo-hlr_10.42.42.2(pid=8004): stdout: | (launched: 2022-12-09_07:37:48.688606) 07:37:51.908344 run osmo-hlr_10.42.42.2(pid=8004): stderr: | �[0;m�[1;31m20221209073748859 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209073748859 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209073748859 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209073748859 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209073748859 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209073748859 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209073748874 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2356/run.2022-12-09_06-55-12/gprs:trx-umtrx+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209073748885 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209073748885 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209073748885 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:37:51.950306 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8003): Terminating (SIGTERM) 07:37:51.989479 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8006): Terminating (SIGTERM) 07:37:52.028921 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8009): Terminating (SIGTERM) 07:37:52.038365 --- ParallelTerminationStrategy: PID 8003 died... 07:37:52.091594 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8003): Terminated: ok {rc=0} 07:37:52.101103 --- ParallelTerminationStrategy: PID 8006 died... 07:37:52.154129 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8006): Terminated: ok {rc=0} 07:37:52.164330 --- ParallelTerminationStrategy: PID 8009 died... 07:37:52.216753 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8009): Terminated: ok {rc=0} 07:37:52.299591 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8007): Process ended prematurely: osmo-stp_10.42.42.5(pid=8007) [trial-2356↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8007)]