Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=7448): Process ended prematurely: osmo-stp_10.42.42.5(pid=7448) [trial-2356↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7448)]
Standard Output
---------------------------------------------- trial-2356 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 07:29:40.916119 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:29:40.927887 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 07:29:41.088799 tst cs_paging_gprs_active.py: using LAC 19890 07:29:41.208059 tst cs_paging_gprs_active.py: using RAC 255 07:29:41.328058 tst cs_paging_gprs_active.py: using CellId 19890 07:29:41.447995 tst cs_paging_gprs_active.py: using BVCI 19891 07:29:41.471198 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:29:41.482348 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:29:41.493247 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:29:41.504329 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:29:41.515465 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:29:41.526581 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:29:41.537787 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:29:41.548856 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:29:41.560112 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 07:29:41.679718 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 07:29:41.961638 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:29:42.088759 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:29:42.401843 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7438): Launched 07:29:42.661952 run iperf3-srv_10.42.42.10(pid=7439): Launched 07:29:42.846935 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:29:42.973358 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:29:43.286901 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7440): Launched 07:29:43.546404 run iperf3-srv_10.42.42.10(pid=7441): Launched 07:29:43.730033 tst cs_paging_gprs_active.py:38: start network... 07:29:43.855790 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:29:44.328832 run create_hlr_db(pid=7442): Launched 07:29:44.501279 bus /gobi_6: Setting Powered False 07:29:45.524668 run create_hlr_db(pid=7442): Terminated: ok {rc=0} 07:29:45.989576 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7444): Launched 07:29:46.474276 run osmo-hlr_10.42.42.2(pid=7445): Launched 07:29:46.773775 run osmo-stp_10.42.42.5: Starting osmo-stp 07:29:47.327034 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7447): Launched 07:29:47.634472 run osmo-stp_10.42.42.5(pid=7448): Launched 07:29:47.745843 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:29:48.270182 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7450): Launched 07:29:48.377750 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:29:48.640791 run patchelf(pid=7451): Launched 07:29:48.816832 run osmo-stp_10.42.42.5(pid=7448): ERR: Terminated: ERROR {rc=1} [trial-2356↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7448)] 07:29:48.945588 run osmo-stp_10.42.42.5(pid=7448): stdout: | (launched: 2022-12-09_07:29:47.482635) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:29:49.075159 run osmo-stp_10.42.42.5(pid=7448): stderr: | �[0;m�[38;5;43m20221209072947649 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209072947649 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209072947649 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209072947650 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209072947650 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209072947650 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209072947650 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:29:49.199613 run osmo-stp_10.42.42.5(pid=7448): stdout: | (launched: 2022-12-09_07:29:47.482635) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:29:49.323505 run osmo-stp_10.42.42.5(pid=7448): stderr: | �[0;m�[38;5;43m20221209072947649 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209072947649 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209072947649 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209072947650 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209072947650 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209072947650 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209072947650 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:29:49.466838 run patchelf(pid=7451): Terminating (SIGINT) 07:29:49.635103 run patchelf(pid=7451): Terminated: ok {rc=0} 07:29:49.666266 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=7448): Process ended prematurely: osmo-stp_10.42.42.5(pid=7448) [trial-2356↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7448)] [trial-2356↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 07:29:49.675640 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 07:29:49.735884 run osmo-hlr_10.42.42.2(pid=7445): ERR: Terminated: ERROR {rc=237} [trial-2356↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7445)] 07:29:49.785063 run osmo-hlr_10.42.42.2(pid=7445): stdout: | (launched: 2022-12-09_07:29:46.155244) 07:29:49.835360 run osmo-hlr_10.42.42.2(pid=7445): stderr: | �[0;m�[1;31m20221209072946511 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209072946512 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209072946512 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209072946512 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209072946512 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209072946512 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209072946536 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2356/run.2022-12-09_06-55-12/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209072946555 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209072946555 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209072946557 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:29:49.877212 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7438): Terminating (SIGTERM) 07:29:49.916754 run iperf3-srv_10.42.42.10(pid=7439): Terminating (SIGTERM) 07:29:49.956235 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7440): Terminating (SIGTERM) 07:29:49.995600 run iperf3-srv_10.42.42.10(pid=7441): Terminating (SIGTERM) 07:29:50.035171 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7444): Terminating (SIGTERM) 07:29:50.074900 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7447): Terminating (SIGTERM) 07:29:50.114489 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7450): Terminating (SIGTERM) 07:29:50.123718 --- ParallelTerminationStrategy: PID 7438 died... 07:29:50.176528 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7438): Terminated: ok {rc=0} 07:29:50.186141 --- ParallelTerminationStrategy: PID 7439 died... 07:29:50.238440 run iperf3-srv_10.42.42.10(pid=7439): Terminated {rc=256} 07:29:50.247961 --- ParallelTerminationStrategy: PID 7440 died... 07:29:50.300143 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7440): Terminated: ok {rc=0} 07:29:50.309711 --- ParallelTerminationStrategy: PID 7441 died... 07:29:50.362610 run iperf3-srv_10.42.42.10(pid=7441): Terminated {rc=256} 07:29:50.371962 --- ParallelTerminationStrategy: PID 7444 died... 07:29:50.424267 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7444): Terminated: ok {rc=0} 07:29:50.433919 --- ParallelTerminationStrategy: PID 7447 died... 07:29:50.486720 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7447): Terminated: ok {rc=0} 07:29:50.496407 --- ParallelTerminationStrategy: PID 7450 died... 07:29:50.548646 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7450): Terminated: ok {rc=0} 07:29:50.631746 bus /gobi_0: Setting Powered False 07:29:51.738115 bus /gobi_0: Setting Powered False 07:29:52.844663 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7448): Process ended prematurely: osmo-stp_10.42.42.5(pid=7448) [trial-2356↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7448)]