Failed
dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any.switch_tch_pdch.py (from dynts_trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any)
Stacktrace
osmo-stp_10.42.42.5(pid=25464): Process ended prematurely: osmo-stp_10.42.42.5(pid=25464) [trial-2358↪dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25464)]
Standard Output
---------------------------------------------- trial-2358 dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any switch_tch_pdch.py ---------------------------------------------- 10:17:44.753874 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 10:17:44.765639 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x bts (candidates: 1) 10:17:44.923748 tst switch_tch_pdch.py: using LAC 20775 10:17:45.044915 tst switch_tch_pdch.py: using RAC 120 10:17:45.168080 tst switch_tch_pdch.py: using CellId 20775 10:17:45.287939 tst switch_tch_pdch.py: using BVCI 20776 10:17:45.311105 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 10:17:45.322477 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 10:17:45.333540 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 10:17:45.344487 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 10:17:45.355457 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 10:17:45.366513 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 10:17:45.377614 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 10:17:45.388537 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 10:17:45.507973 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 10:17:45.802177 tst switch_tch_pdch.py:51: start network... 10:17:45.939842 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:17:46.493434 run create_hlr_db(pid=25458): Launched 10:17:46.684696 bus /gobi_6: Setting Powered False 10:17:47.702619 run create_hlr_db(pid=25458): Terminated: ok {rc=0} 10:17:48.109656 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25460): Launched 10:17:48.426757 run osmo-hlr_10.42.42.2(pid=25461): Launched 10:17:48.543699 run osmo-stp_10.42.42.5: Starting osmo-stp 10:17:49.109418 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25463): Launched 10:17:49.435293 run osmo-stp_10.42.42.5(pid=25464): Launched 10:17:49.553205 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:17:50.119531 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25466): Launched 10:17:50.234398 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:17:50.517801 run patchelf(pid=25467): Launched 10:17:50.707433 run osmo-stp_10.42.42.5(pid=25464): ERR: Terminated: ERROR {rc=1} [trial-2358↪dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25464)] 10:17:50.846064 run osmo-stp_10.42.42.5(pid=25464): stdout: | (launched: 2022-12-09_10:17:49.273217) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:17:50.984427 run osmo-stp_10.42.42.5(pid=25464): stderr: | �[0;m�[38;5;43m20221209101749464 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209101749465 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209101749465 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209101749465 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209101749466 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209101749466 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209101749466 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:17:51.118347 run osmo-stp_10.42.42.5(pid=25464): stdout: | (launched: 2022-12-09_10:17:49.273217) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:17:51.251332 run osmo-stp_10.42.42.5(pid=25464): stderr: | �[0;m�[38;5;43m20221209101749464 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209101749465 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209101749465 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209101749465 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209101749466 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209101749466 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209101749466 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:17:51.405937 run patchelf(pid=25467): Terminating (SIGINT) 10:17:51.587313 run patchelf(pid=25467): Terminated: ok {rc=0} 10:17:51.620180 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=25464): Process ended prematurely: osmo-stp_10.42.42.5(pid=25464) [trial-2358↪dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25464)] [trial-2358↪dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54] 10:17:51.629736 tst switch_tch_pdch.py:54: Test FAILED (6.9 sec) 10:17:51.693966 run osmo-hlr_10.42.42.2(pid=25461): ERR: Terminated: ERROR {rc=237} [trial-2358↪dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=25461)] 10:17:51.746337 run osmo-hlr_10.42.42.2(pid=25461): stdout: | (launched: 2022-12-09_10:17:48.262320) 10:17:51.799196 run osmo-hlr_10.42.42.2(pid=25461): stderr: | �[0;m�[1;31m20221209101748457 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209101748457 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209101748457 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209101748457 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209101748458 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209101748458 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209101748469 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2358/run.2022-12-09_09-50-18/dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209101748478 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209101748478 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209101748478 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:17:51.844266 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25460): Terminating (SIGTERM) 10:17:51.887181 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25463): Terminating (SIGTERM) 10:17:51.929466 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25466): Terminating (SIGTERM) 10:17:51.939688 --- ParallelTerminationStrategy: PID 25460 died... 10:17:51.996775 run pcap-recorder_any(filters='host 10.42.42.2')(pid=25460): Terminated: ok {rc=0} 10:17:52.007126 --- ParallelTerminationStrategy: PID 25463 died... 10:17:52.063630 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=25463): Terminated: ok {rc=0} 10:17:52.074325 --- ParallelTerminationStrategy: PID 25466 died... 10:17:52.130817 run pcap-recorder_any(filters='host 10.42.42.6')(pid=25466): Terminated: ok {rc=0} 10:17:52.218376 bus /gobi_0: Setting Powered False 10:17:53.326657 bus /gobi_0: Setting Powered False 10:17:54.439915 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=25464): Process ended prematurely: osmo-stp_10.42.42.5(pid=25464) [trial-2358↪dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=25464)]