Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=23922): Process ended prematurely: osmo-stp_10.42.42.5(pid=23922) [trial-2358↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23922)]
Standard Output
---------------------------------------------- trial-2358 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 10:07:05.060667 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:07:05.072079 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 10:07:05.225416 tst cs_paging_gprs_active.py: using LAC 20719 10:07:05.353411 tst cs_paging_gprs_active.py: using RAC 64 10:07:05.482783 tst cs_paging_gprs_active.py: using CellId 20719 10:07:05.616210 tst cs_paging_gprs_active.py: using BVCI 20720 10:07:05.641276 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:07:05.652531 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:07:05.663603 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:07:05.675160 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:07:05.686492 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:07:05.697881 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:07:05.710454 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:07:05.722513 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 10:07:05.733510 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:07:05.848801 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 10:07:06.144630 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:07:06.282747 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:07:06.620423 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23912): Launched 10:07:06.902654 run iperf3-srv_10.42.42.10(pid=23913): Launched 10:07:07.102927 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:07:07.239599 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:07:07.577931 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23914): Launched 10:07:07.857979 run iperf3-srv_10.42.42.10(pid=23915): Launched 10:07:08.058060 tst cs_paging_gprs_active.py:38: start network... 10:07:08.194935 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:07:08.712219 run create_hlr_db(pid=23916): Launched 10:07:08.900774 bus /gobi_6: Setting Powered False 10:07:09.922674 run create_hlr_db(pid=23916): Terminated: ok {rc=0} 10:07:10.333747 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23918): Launched 10:07:10.641856 run osmo-hlr_10.42.42.2(pid=23919): Launched 10:07:10.756209 run osmo-stp_10.42.42.5: Starting osmo-stp 10:07:11.286553 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23921): Launched 10:07:11.593114 run osmo-stp_10.42.42.5(pid=23922): Launched 10:07:11.703788 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:07:12.237816 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23924): Launched 10:07:12.347830 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:07:12.614086 run patchelf(pid=23925): Launched 10:07:12.792677 run osmo-stp_10.42.42.5(pid=23922): ERR: Terminated: ERROR {rc=1} [trial-2358↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23922)] 10:07:12.923263 run osmo-stp_10.42.42.5(pid=23922): stdout: | (launched: 2022-12-09_10:07:11.441811) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:07:13.054169 run osmo-stp_10.42.42.5(pid=23922): stderr: | �[0;m�[38;5;43m20221209100711612 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209100711612 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209100711612 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209100711613 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209100711613 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209100711613 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209100711613 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:07:13.180647 run osmo-stp_10.42.42.5(pid=23922): stdout: | (launched: 2022-12-09_10:07:11.441811) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:07:13.306518 run osmo-stp_10.42.42.5(pid=23922): stderr: | �[0;m�[38;5;43m20221209100711612 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209100711612 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209100711612 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209100711613 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209100711613 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209100711613 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209100711613 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:07:13.452280 run patchelf(pid=23925): Terminating (SIGINT) 10:07:13.623292 run patchelf(pid=23925): Terminated: ok {rc=0} 10:07:13.654814 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=23922): Process ended prematurely: osmo-stp_10.42.42.5(pid=23922) [trial-2358↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23922)] [trial-2358↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 10:07:13.663990 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 10:07:13.724272 run osmo-hlr_10.42.42.2(pid=23919): ERR: Terminated: ERROR {rc=237} [trial-2358↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23919)] 10:07:13.773466 run osmo-hlr_10.42.42.2(pid=23919): stdout: | (launched: 2022-12-09_10:07:10.489272) 10:07:13.823478 run osmo-hlr_10.42.42.2(pid=23919): stderr: | �[0;m�[1;31m20221209100710668 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209100710668 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209100710668 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209100710668 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209100710668 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209100710668 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209100710680 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2358/run.2022-12-09_09-50-18/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209100710689 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209100710689 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209100710690 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:07:13.866247 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23912): Terminating (SIGTERM) 10:07:13.906413 run iperf3-srv_10.42.42.10(pid=23913): Terminating (SIGTERM) 10:07:13.946641 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23914): Terminating (SIGTERM) 10:07:13.986837 run iperf3-srv_10.42.42.10(pid=23915): Terminating (SIGTERM) 10:07:14.027088 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23918): Terminating (SIGTERM) 10:07:14.067268 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23921): Terminating (SIGTERM) 10:07:14.107490 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23924): Terminating (SIGTERM) 10:07:14.116718 --- ParallelTerminationStrategy: PID 23912 died... 10:07:14.170174 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23912): Terminated: ok {rc=0} 10:07:14.179757 --- ParallelTerminationStrategy: PID 23913 died... 10:07:14.233349 run iperf3-srv_10.42.42.10(pid=23913): Terminated {rc=256} 10:07:14.242929 --- ParallelTerminationStrategy: PID 23914 died... 10:07:14.295992 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23914): Terminated: ok {rc=0} 10:07:14.305830 --- ParallelTerminationStrategy: PID 23915 died... 10:07:14.358968 run iperf3-srv_10.42.42.10(pid=23915): Terminated {rc=256} 10:07:14.368485 --- ParallelTerminationStrategy: PID 23918 died... 10:07:14.421669 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23918): Terminated: ok {rc=0} 10:07:14.431109 --- ParallelTerminationStrategy: PID 23921 died... 10:07:14.484451 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23921): Terminated: ok {rc=0} 10:07:14.494086 --- ParallelTerminationStrategy: PID 23924 died... 10:07:14.547326 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23924): Terminated: ok {rc=0} 10:07:14.631553 bus /gobi_0: Setting Powered False 10:07:15.739124 bus /gobi_0: Setting Powered False 10:07:16.847343 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23922): Process ended prematurely: osmo-stp_10.42.42.5(pid=23922) [trial-2358↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23922)]