Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=22694): Process ended prematurely: osmo-stp_10.42.42.5(pid=22694) [trial-2358↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22694)]
Standard Output
---------------------------------------------- trial-2358 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 09:57:09.971642 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:57:09.982504 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 09:57:10.106228 tst cs_paging_gprs_active.py: using LAC 20667 09:57:10.234725 tst cs_paging_gprs_active.py: using RAC 12 09:57:10.362340 tst cs_paging_gprs_active.py: using CellId 20667 09:57:10.490600 tst cs_paging_gprs_active.py: using BVCI 20668 09:57:10.515724 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:57:10.527228 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:57:10.538845 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:57:10.550437 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:57:10.561767 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:57:10.572875 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:57:10.584456 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:57:10.596241 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:57:10.607622 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 09:57:10.726584 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 09:57:11.021166 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 09:57:11.157056 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:57:11.493607 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22684): Launched 09:57:11.773728 run iperf3-srv_10.42.42.10(pid=22685): Launched 09:57:11.972434 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 09:57:12.108146 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:57:12.442898 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22686): Launched 09:57:12.722938 run iperf3-srv_10.42.42.10(pid=22687): Launched 09:57:12.921438 tst cs_paging_gprs_active.py:38: start network... 09:57:13.057348 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:57:13.566352 run create_hlr_db(pid=22688): Launched 09:57:13.752917 bus /gobi_6: Setting Powered False 09:57:14.774656 run create_hlr_db(pid=22688): Terminated: ok {rc=0} 09:57:15.205851 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22690): Launched 09:57:15.530249 run osmo-hlr_10.42.42.2(pid=22691): Launched 09:57:15.650193 run osmo-stp_10.42.42.5: Starting osmo-stp 09:57:16.234988 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22693): Launched 09:57:16.650962 run osmo-stp_10.42.42.5(pid=22694): Launched 09:57:16.822982 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:57:17.404073 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22696): Launched 09:57:17.511456 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:57:17.774199 run patchelf(pid=22697): Launched 09:57:17.949747 run osmo-stp_10.42.42.5(pid=22694): ERR: Terminated: ERROR {rc=1} [trial-2358↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22694)] 09:57:18.078445 run osmo-stp_10.42.42.5(pid=22694): stdout: | (launched: 2022-12-09_09:57:16.397507) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:57:18.207410 run osmo-stp_10.42.42.5(pid=22694): stderr: | �[0;m�[38;5;43m20221209095716727 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209095716727 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209095716727 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209095716728 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209095716728 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209095716728 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209095716728 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:57:18.332633 run osmo-stp_10.42.42.5(pid=22694): stdout: | (launched: 2022-12-09_09:57:16.397507) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:57:18.456296 run osmo-stp_10.42.42.5(pid=22694): stderr: | �[0;m�[38;5;43m20221209095716727 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209095716727 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209095716727 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209095716728 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209095716728 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209095716728 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209095716728 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:57:18.600082 run patchelf(pid=22697): Terminating (SIGINT) 09:57:18.768565 run patchelf(pid=22697): Terminated: ok {rc=0} 09:57:18.799594 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=22694): Process ended prematurely: osmo-stp_10.42.42.5(pid=22694) [trial-2358↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22694)] [trial-2358↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 09:57:18.808827 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 09:57:18.868638 run osmo-hlr_10.42.42.2(pid=22691): ERR: Terminated: ERROR {rc=237} [trial-2358↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22691)] 09:57:18.917617 run osmo-hlr_10.42.42.2(pid=22691): stdout: | (launched: 2022-12-09_09:57:15.370685) 09:57:18.967153 run osmo-hlr_10.42.42.2(pid=22691): stderr: | �[0;m�[1;31m20221209095715570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209095715570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209095715570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209095715570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209095715570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209095715570 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209095715582 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2358/run.2022-12-09_09-50-18/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209095715591 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209095715592 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209095715592 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:57:19.010151 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22684): Terminating (SIGTERM) 09:57:19.050078 run iperf3-srv_10.42.42.10(pid=22685): Terminating (SIGTERM) 09:57:19.090144 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22686): Terminating (SIGTERM) 09:57:19.130009 run iperf3-srv_10.42.42.10(pid=22687): Terminating (SIGTERM) 09:57:19.169953 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22690): Terminating (SIGTERM) 09:57:19.210227 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22693): Terminating (SIGTERM) 09:57:19.250111 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22696): Terminating (SIGTERM) 09:57:19.259310 --- ParallelTerminationStrategy: PID 22684 died... 09:57:19.312592 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22684): Terminated: ok {rc=0} 09:57:19.322265 --- ParallelTerminationStrategy: PID 22685 died... 09:57:19.375002 run iperf3-srv_10.42.42.10(pid=22685): Terminated {rc=256} 09:57:19.384537 --- ParallelTerminationStrategy: PID 22686 died... 09:57:19.437172 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22686): Terminated: ok {rc=0} 09:57:19.446599 --- ParallelTerminationStrategy: PID 22687 died... 09:57:19.499233 run iperf3-srv_10.42.42.10(pid=22687): Terminated {rc=256} 09:57:19.508801 --- ParallelTerminationStrategy: PID 22690 died... 09:57:19.561450 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22690): Terminated: ok {rc=0} 09:57:19.570972 --- ParallelTerminationStrategy: PID 22693 died... 09:57:19.623728 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22693): Terminated: ok {rc=0} 09:57:19.633405 --- ParallelTerminationStrategy: PID 22696 died... 09:57:19.685924 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22696): Terminated: ok {rc=0} 09:57:19.774044 bus /gobi_0: Setting Powered False 09:57:20.877340 bus /gobi_0: Setting Powered False 09:57:21.988805 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22694): Process ended prematurely: osmo-stp_10.42.42.5(pid=22694) [trial-2358↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22694)]