Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=20253): Process ended prematurely: osmo-stp_10.42.42.5(pid=20253) [trial-2361↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20253)]
Standard Output
---------------------------------------------- trial-2361 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 16:03:10.272566 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:03:10.284634 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 16:03:10.437162 tst cs_paging_gprs_active.py: using LAC 22153 16:03:10.566402 tst cs_paging_gprs_active.py: using RAC 223 16:03:10.695207 tst cs_paging_gprs_active.py: using CellId 22153 16:03:10.825643 tst cs_paging_gprs_active.py: using BVCI 22154 16:03:10.851148 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:03:10.863100 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:03:10.875849 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:03:10.887875 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:03:10.900387 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:03:10.913847 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:03:10.926618 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:03:10.938404 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 16:03:10.951489 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 16:03:11.074517 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 16:03:11.377903 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 16:03:11.518035 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:03:11.863999 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20243): Launched 16:03:12.151219 run iperf3-srv_10.42.42.10(pid=20244): Launched 16:03:12.356010 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 16:03:12.495645 run iperf3-srv_10.42.42.10: Starting iperf3-srv 16:03:12.841522 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20245): Launched 16:03:13.128039 run iperf3-srv_10.42.42.10(pid=20246): Launched 16:03:13.332075 tst cs_paging_gprs_active.py:38: start network... 16:03:13.470991 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:03:13.993836 run create_hlr_db(pid=20247): Launched 16:03:14.186300 bus /gobi_6: Setting Powered False 16:03:15.205458 run create_hlr_db(pid=20247): Terminated: ok {rc=0} 16:03:15.648097 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20249): Launched 16:03:16.041379 run osmo-hlr_10.42.42.2(pid=20250): Launched 16:03:16.292009 run osmo-stp_10.42.42.5: Starting osmo-stp 16:03:17.059759 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20252): Launched 16:03:17.388776 run osmo-stp_10.42.42.5(pid=20253): Launched 16:03:17.510163 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:03:18.089972 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20255): Launched 16:03:18.208284 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:03:18.498283 run patchelf(pid=20256): Launched 16:03:18.691940 run osmo-stp_10.42.42.5(pid=20253): ERR: Terminated: ERROR {rc=1} [trial-2361↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20253)] 16:03:18.833084 run osmo-stp_10.42.42.5(pid=20253): stdout: | (launched: 2022-12-09_16:03:17.223336) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:03:18.975454 run osmo-stp_10.42.42.5(pid=20253): stderr: | �[0;m�[38;5;43m20221209160317415 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209160317415 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209160317416 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209160317416 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209160317416 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209160317417 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209160317417 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:03:19.112309 run osmo-stp_10.42.42.5(pid=20253): stdout: | (launched: 2022-12-09_16:03:17.223336) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:03:19.247819 run osmo-stp_10.42.42.5(pid=20253): stderr: | �[0;m�[38;5;43m20221209160317415 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209160317415 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209160317416 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209160317416 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209160317416 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209160317417 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209160317417 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:03:19.406116 run patchelf(pid=20256): Terminating (SIGINT) 16:03:19.591515 run patchelf(pid=20256): Terminated: ok {rc=0} 16:03:19.625738 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=20253): Process ended prematurely: osmo-stp_10.42.42.5(pid=20253) [trial-2361↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20253)] [trial-2361↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 16:03:19.635738 tst cs_paging_gprs_active.py:38: Test FAILED (9.4 sec) 16:03:19.699845 run osmo-hlr_10.42.42.2(pid=20250): ERR: Terminated: ERROR {rc=237} [trial-2361↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20250)] 16:03:19.751662 run osmo-hlr_10.42.42.2(pid=20250): stdout: | (launched: 2022-12-09_16:03:15.817319) 16:03:19.804670 run osmo-hlr_10.42.42.2(pid=20250): stderr: | �[0;m�[1;31m20221209160316167 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209160316168 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209160316168 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209160316168 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209160316168 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209160316169 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209160316195 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2361/run.2022-12-09_15-36-58/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209160316233 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209160316234 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209160316235 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:03:19.849939 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20243): Terminating (SIGTERM) 16:03:19.892524 run iperf3-srv_10.42.42.10(pid=20244): Terminating (SIGTERM) 16:03:19.935093 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20245): Terminating (SIGTERM) 16:03:19.977842 run iperf3-srv_10.42.42.10(pid=20246): Terminating (SIGTERM) 16:03:20.020284 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20249): Terminating (SIGTERM) 16:03:20.063232 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20252): Terminating (SIGTERM) 16:03:20.105949 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20255): Terminating (SIGTERM) 16:03:20.115735 --- ParallelTerminationStrategy: PID 20243 died... 16:03:20.172221 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20243): Terminated: ok {rc=0} 16:03:20.182485 --- ParallelTerminationStrategy: PID 20244 died... 16:03:20.238543 run iperf3-srv_10.42.42.10(pid=20244): Terminated {rc=256} 16:03:20.248600 --- ParallelTerminationStrategy: PID 20245 died... 16:03:20.304488 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20245): Terminated: ok {rc=0} 16:03:20.314897 --- ParallelTerminationStrategy: PID 20246 died... 16:03:20.370765 run iperf3-srv_10.42.42.10(pid=20246): Terminated {rc=256} 16:03:20.381148 --- ParallelTerminationStrategy: PID 20249 died... 16:03:20.437733 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20249): Terminated: ok {rc=0} 16:03:20.447983 --- ParallelTerminationStrategy: PID 20252 died... 16:03:20.503955 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20252): Terminated: ok {rc=0} 16:03:20.514377 --- ParallelTerminationStrategy: PID 20255 died... 16:03:20.570436 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20255): Terminated: ok {rc=0} 16:03:20.658493 bus /gobi_0: Setting Powered False 16:03:21.766650 bus /gobi_0: Setting Powered False 16:03:22.875515 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20253): Process ended prematurely: osmo-stp_10.42.42.5(pid=20253) [trial-2361↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20253)]