Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=787): Process ended prematurely: osmo-stp_10.42.42.5(pid=787) [trial-2362↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=787)]
Standard Output
---------------------------------------------- trial-2362 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 18:23:01.408210 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:23:01.424178 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 18:23:01.600655 tst iperf3.py: using LAC 22861 18:23:01.760209 tst iperf3.py: using RAC 166 18:23:01.900665 tst iperf3.py: using CellId 22861 18:23:02.038310 tst iperf3.py: using BVCI 22862 18:23:02.062300 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:23:02.074742 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:23:02.086793 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:23:02.100234 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:23:02.112289 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:23:02.137216 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:23:02.156709 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:23:02.169538 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:23:02.183029 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 18:23:02.510055 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 18:23:02.638940 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:23:02.983040 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=556): Launched 18:23:03.347491 run iperf3-srv_10.42.42.10(pid=578): Launched 18:23:03.573724 tst iperf3.py:8: start network... 18:23:03.731661 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:23:04.382671 run create_hlr_db(pid=696): Launched 18:23:04.603949 bus /gobi_6: Setting Powered False 18:23:05.584456 run create_hlr_db(pid=696): Terminated: ok {rc=0} 18:23:06.052767 run pcap-recorder_any(filters='host 10.42.42.2')(pid=781): Launched 18:23:06.424314 run osmo-hlr_10.42.42.2(pid=782): Launched 18:23:06.652677 run osmo-stp_10.42.42.5: Starting osmo-stp 18:23:07.261614 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=786): Launched 18:23:07.672210 run osmo-stp_10.42.42.5(pid=787): Launched 18:23:07.893822 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:23:08.511264 run pcap-recorder_any(filters='host 10.42.42.6')(pid=789): Launched 18:23:08.623007 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:23:08.910291 run patchelf(pid=790): Launched 18:23:09.091577 run osmo-stp_10.42.42.5(pid=787): ERR: Terminated: ERROR {rc=1} [trial-2362↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=787)] 18:23:09.226244 run osmo-stp_10.42.42.5(pid=787): stdout: | (launched: 2022-12-09_18:23:07.414450) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:23:09.360276 run osmo-stp_10.42.42.5(pid=787): stderr: | �[0;m�[38;5;43m20221209182307744 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209182307744 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209182307753 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209182307754 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209182307754 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209182307754 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209182307754 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:23:09.490229 run osmo-stp_10.42.42.5(pid=787): stdout: | (launched: 2022-12-09_18:23:07.414450) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:23:09.620690 run osmo-stp_10.42.42.5(pid=787): stderr: | �[0;m�[38;5;43m20221209182307744 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209182307744 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209182307753 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209182307754 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209182307754 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209182307754 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209182307754 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:23:09.770646 run patchelf(pid=790): Terminating (SIGINT) 18:23:09.946140 run patchelf(pid=790): Terminated: ok {rc=0} 18:23:09.980752 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=787): Process ended prematurely: osmo-stp_10.42.42.5(pid=787) [trial-2362↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=787)] [trial-2362↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 18:23:09.991449 tst iperf3.py:8: Test FAILED (8.6 sec) 18:23:10.057993 run osmo-hlr_10.42.42.2(pid=782): ERR: Terminated: ERROR {rc=237} [trial-2362↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=782)] 18:23:10.110650 run osmo-hlr_10.42.42.2(pid=782): stdout: | (launched: 2022-12-09_18:23:06.205358) 18:23:10.163719 run osmo-hlr_10.42.42.2(pid=782): stderr: | �[0;m�[1;31m20221209182306503 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209182306503 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209182306503 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209182306503 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209182306503 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209182306503 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209182306528 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2362/run.2022-12-09_17-10-07/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209182306536 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209182306537 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209182306537 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:23:10.210096 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=556): Terminating (SIGTERM) 18:23:10.254682 run iperf3-srv_10.42.42.10(pid=578): Terminating (SIGTERM) 18:23:10.298992 run pcap-recorder_any(filters='host 10.42.42.2')(pid=781): Terminating (SIGTERM) 18:23:10.343579 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=786): Terminating (SIGTERM) 18:23:10.390546 run pcap-recorder_any(filters='host 10.42.42.6')(pid=789): Terminating (SIGTERM) 18:23:10.401160 --- ParallelTerminationStrategy: PID 556 died... 18:23:10.460279 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=556): Terminated: ok {rc=0} 18:23:10.470813 --- ParallelTerminationStrategy: PID 578 died... 18:23:10.527857 run iperf3-srv_10.42.42.10(pid=578): Terminated {rc=256} 18:23:10.538485 --- ParallelTerminationStrategy: PID 781 died... 18:23:10.597108 run pcap-recorder_any(filters='host 10.42.42.2')(pid=781): Terminated: ok {rc=0} 18:23:10.607642 --- ParallelTerminationStrategy: PID 786 died... 18:23:10.665518 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=786): Terminated: ok {rc=0} 18:23:10.676017 --- ParallelTerminationStrategy: PID 789 died... 18:23:10.732645 run pcap-recorder_any(filters='host 10.42.42.6')(pid=789): Terminated: ok {rc=0} 18:23:10.822372 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=787): Process ended prematurely: osmo-stp_10.42.42.5(pid=787) [trial-2362↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=787)]