Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=28287): Process ended prematurely: osmo-stp_10.42.42.5(pid=28287) [trial-2362↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28287)]
Standard Output
---------------------------------------------- trial-2362 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 17:36:32.918338 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:36:32.930275 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 17:36:33.080765 tst cs_paging_gprs_active.py: using LAC 22614 17:36:33.203497 tst cs_paging_gprs_active.py: using RAC 174 17:36:33.324671 tst cs_paging_gprs_active.py: using CellId 22614 17:36:33.446478 tst cs_paging_gprs_active.py: using BVCI 22615 17:36:33.469785 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:36:33.480920 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:36:33.491973 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:36:33.503193 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:36:33.514437 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:36:33.525769 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:36:33.537196 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:36:33.548405 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 17:36:33.560073 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 17:36:33.682895 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 17:36:33.982259 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 17:36:34.119777 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:36:34.461354 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28277): Launched 17:36:34.744070 run iperf3-srv_10.42.42.10(pid=28278): Launched 17:36:34.946625 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 17:36:35.083755 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:36:35.423329 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28279): Launched 17:36:35.706028 run iperf3-srv_10.42.42.10(pid=28280): Launched 17:36:35.907546 tst cs_paging_gprs_active.py:38: start network... 17:36:36.044374 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:36:36.569880 run create_hlr_db(pid=28281): Launched 17:36:36.759001 bus /gobi_6: Setting Powered False 17:36:37.778769 run create_hlr_db(pid=28281): Terminated: ok {rc=0} 17:36:38.189373 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28283): Launched 17:36:38.496748 run osmo-hlr_10.42.42.2(pid=28284): Launched 17:36:38.617146 run osmo-stp_10.42.42.5: Starting osmo-stp 17:36:39.156319 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28286): Launched 17:36:39.463923 run osmo-stp_10.42.42.5(pid=28287): Launched 17:36:39.575790 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:36:40.111067 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28289): Launched 17:36:40.220034 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:36:40.489418 run patchelf(pid=28290): Launched 17:36:40.669977 run osmo-stp_10.42.42.5(pid=28287): ERR: Terminated: ERROR {rc=1} [trial-2362↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28287)] 17:36:40.801272 run osmo-stp_10.42.42.5(pid=28287): stdout: | (launched: 2022-12-09_17:36:39.312095) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:36:40.932874 run osmo-stp_10.42.42.5(pid=28287): stderr: | �[0;m�[38;5;43m20221209173639485 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209173639486 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209173639486 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209173639486 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209173639487 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209173639487 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209173639487 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:36:41.059775 run osmo-stp_10.42.42.5(pid=28287): stdout: | (launched: 2022-12-09_17:36:39.312095) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:36:41.185572 run osmo-stp_10.42.42.5(pid=28287): stderr: | �[0;m�[38;5;43m20221209173639485 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209173639486 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209173639486 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209173639486 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209173639487 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209173639487 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209173639487 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:36:41.332493 run patchelf(pid=28290): Terminating (SIGINT) 17:36:41.505608 run patchelf(pid=28290): Terminated: ok {rc=0} 17:36:41.537524 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=28287): Process ended prematurely: osmo-stp_10.42.42.5(pid=28287) [trial-2362↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28287)] [trial-2362↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 17:36:41.546955 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 17:36:41.608180 run osmo-hlr_10.42.42.2(pid=28284): ERR: Terminated: ERROR {rc=237} [trial-2362↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28284)] 17:36:41.657943 run osmo-hlr_10.42.42.2(pid=28284): stdout: | (launched: 2022-12-09_17:36:38.345247) 17:36:41.708171 run osmo-hlr_10.42.42.2(pid=28284): stderr: | �[0;m�[1;31m20221209173638524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209173638524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209173638524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209173638524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209173638524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209173638524 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209173638537 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2362/run.2022-12-09_17-10-07/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209173638546 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209173638547 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209173638547 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:36:41.750785 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28277): Terminating (SIGTERM) 17:36:41.790941 run iperf3-srv_10.42.42.10(pid=28278): Terminating (SIGTERM) 17:36:41.831218 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28279): Terminating (SIGTERM) 17:36:41.871337 run iperf3-srv_10.42.42.10(pid=28280): Terminating (SIGTERM) 17:36:41.911722 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28283): Terminating (SIGTERM) 17:36:41.951816 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28286): Terminating (SIGTERM) 17:36:41.991986 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28289): Terminating (SIGTERM) 17:36:42.001469 --- ParallelTerminationStrategy: PID 28277 died... 17:36:42.055776 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28277): Terminated: ok {rc=0} 17:36:42.065720 --- ParallelTerminationStrategy: PID 28278 died... 17:36:42.119451 run iperf3-srv_10.42.42.10(pid=28278): Terminated {rc=256} 17:36:42.129076 --- ParallelTerminationStrategy: PID 28279 died... 17:36:42.182301 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28279): Terminated: ok {rc=0} 17:36:42.192103 --- ParallelTerminationStrategy: PID 28280 died... 17:36:42.245287 run iperf3-srv_10.42.42.10(pid=28280): Terminated {rc=256} 17:36:42.255233 --- ParallelTerminationStrategy: PID 28283 died... 17:36:42.308998 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28283): Terminated: ok {rc=0} 17:36:42.318608 --- ParallelTerminationStrategy: PID 28286 died... 17:36:42.372333 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28286): Terminated: ok {rc=0} 17:36:42.381990 --- ParallelTerminationStrategy: PID 28289 died... 17:36:42.436052 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28289): Terminated: ok {rc=0} 17:36:42.525224 bus /gobi_0: Setting Powered False 17:36:43.630538 bus /gobi_0: Setting Powered False 17:36:44.743192 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28287): Process ended prematurely: osmo-stp_10.42.42.5(pid=28287) [trial-2362↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28287)]