Failed
gprs:trx-b200.ping.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=28052): Process ended prematurely: osmo-stp_10.42.42.5(pid=28052) [trial-2362↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28052)]
Standard Output
---------------------------------------------- trial-2362 gprs:trx-b200 ping.py ---------------------------------------------- 17:33:15.355788 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 17:33:15.367588 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 17:33:15.511055 tst ping.py: using LAC 22597 17:33:15.632368 tst ping.py: using RAC 157 17:33:15.750086 tst ping.py: using CellId 22597 17:33:15.890040 tst ping.py: using BVCI 22598 17:33:15.914064 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 17:33:15.926432 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 17:33:15.937545 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 17:33:15.949667 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 17:33:15.962276 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 17:33:15.973912 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 17:33:15.986247 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 17:33:15.999838 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 17:33:16.287835 tst ping.py:19: start network... 17:33:16.429981 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:33:16.940541 run create_hlr_db(pid=28046): Launched 17:33:17.119783 bus /gobi_6: Setting Powered False 17:33:18.137088 run create_hlr_db(pid=28046): Terminated: ok {rc=0} 17:33:18.547568 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28048): Launched 17:33:18.848910 run osmo-hlr_10.42.42.2(pid=28049): Launched 17:33:18.971699 run osmo-stp_10.42.42.5: Starting osmo-stp 17:33:19.504277 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28051): Launched 17:33:19.805014 run osmo-stp_10.42.42.5(pid=28052): Launched 17:33:19.914228 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:33:20.436630 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28054): Launched 17:33:20.543545 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:33:20.806185 run patchelf(pid=28055): Launched 17:33:20.982495 run osmo-stp_10.42.42.5(pid=28052): ERR: Terminated: ERROR {rc=1} [trial-2362↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28052)] 17:33:21.111910 run osmo-stp_10.42.42.5(pid=28052): stdout: | (launched: 2022-12-09_17:33:19.656623) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:33:21.242174 run osmo-stp_10.42.42.5(pid=28052): stderr: | �[0;m�[38;5;43m20221209173319826 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209173319827 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209173319827 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209173319827 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209173319828 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209173319828 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209173319828 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:33:21.367040 run osmo-stp_10.42.42.5(pid=28052): stdout: | (launched: 2022-12-09_17:33:19.656623) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:33:21.490580 run osmo-stp_10.42.42.5(pid=28052): stderr: | �[0;m�[38;5;43m20221209173319826 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209173319827 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209173319827 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209173319827 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209173319828 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209173319828 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209173319828 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:33:21.635405 run patchelf(pid=28055): Terminating (SIGINT) 17:33:21.804724 run patchelf(pid=28055): Terminated: ok {rc=0} 17:33:21.835786 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=28052): Process ended prematurely: osmo-stp_10.42.42.5(pid=28052) [trial-2362↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28052)] [trial-2362↪gprs:trx-b200↪ping.py:22] 17:33:21.844418 tst ping.py:22: Test FAILED (6.5 sec) 17:33:21.906099 run osmo-hlr_10.42.42.2(pid=28049): ERR: Terminated: ERROR {rc=237} [trial-2362↪gprs:trx-b200↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28049)] 17:33:21.955936 run osmo-hlr_10.42.42.2(pid=28049): stdout: | (launched: 2022-12-09_17:33:18.700396) 17:33:22.006644 run osmo-hlr_10.42.42.2(pid=28049): stderr: | �[0;m�[1;31m20221209173318877 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209173318877 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209173318878 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209173318878 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209173318878 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209173318878 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209173318890 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2362/run.2022-12-09_17-10-07/gprs:trx-b200/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209173318898 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209173318899 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209173318899 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:33:22.049017 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28048): Terminating (SIGTERM) 17:33:22.089507 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28051): Terminating (SIGTERM) 17:33:22.129824 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28054): Terminating (SIGTERM) 17:33:22.139571 --- ParallelTerminationStrategy: PID 28048 died... 17:33:22.193773 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28048): Terminated: ok {rc=0} 17:33:22.203701 --- ParallelTerminationStrategy: PID 28051 died... 17:33:22.257565 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28051): Terminated: ok {rc=0} 17:33:22.267737 --- ParallelTerminationStrategy: PID 28054 died... 17:33:22.321798 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28054): Terminated: ok {rc=0} 17:33:22.405351 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28052): Process ended prematurely: osmo-stp_10.42.42.5(pid=28052) [trial-2362↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28052)]