Failed
gprs:trx-lms+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=31207): Process ended prematurely: osmo-stp_10.42.42.5(pid=31207) [trial-2362↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31207)]
Standard Output
---------------------------------------------- trial-2362 gprs:trx-lms+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 18:01:41.060184 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:01:41.071766 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 18:01:41.238594 tst cs_paging_gprs_active.py: using LAC 22747 18:01:41.365464 tst cs_paging_gprs_active.py: using RAC 52 18:01:41.496923 tst cs_paging_gprs_active.py: using CellId 22747 18:01:41.624292 tst cs_paging_gprs_active.py: using BVCI 22748 18:01:41.649464 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:01:41.660813 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:01:41.672029 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:01:41.683312 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:01:41.694505 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:01:41.705786 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:01:41.717129 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:01:41.728138 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:01:41.739564 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 18:01:41.856776 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 18:01:42.143756 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 18:01:42.272719 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:01:42.592919 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31197): Launched 18:01:42.857978 run iperf3-srv_10.42.42.10(pid=31198): Launched 18:01:43.045216 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 18:01:43.173061 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:01:43.493477 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31199): Launched 18:01:43.760137 run iperf3-srv_10.42.42.10(pid=31200): Launched 18:01:43.946371 tst cs_paging_gprs_active.py:38: start network... 18:01:44.073456 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:01:44.558597 run create_hlr_db(pid=31201): Launched 18:01:44.735300 bus /gobi_6: Setting Powered False 18:01:45.757803 run create_hlr_db(pid=31201): Terminated: ok {rc=0} 18:01:46.215456 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31203): Launched 18:01:46.660528 run osmo-hlr_10.42.42.2(pid=31204): Launched 18:01:46.900628 run osmo-stp_10.42.42.5: Starting osmo-stp 18:01:47.496007 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31206): Launched 18:01:47.826776 run osmo-stp_10.42.42.5(pid=31207): Launched 18:01:47.946127 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:01:48.522368 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31209): Launched 18:01:48.639619 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:01:48.928041 run patchelf(pid=31210): Launched 18:01:49.121937 run osmo-stp_10.42.42.5(pid=31207): ERR: Terminated: ERROR {rc=1} [trial-2362↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31207)] 18:01:49.262082 run osmo-stp_10.42.42.5(pid=31207): stdout: | (launched: 2022-12-09_18:01:47.663693) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:01:49.402237 run osmo-stp_10.42.42.5(pid=31207): stderr: | �[0;m�[38;5;43m20221209180147856 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209180147856 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209180147856 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209180147857 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209180147857 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209180147857 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209180147858 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:01:49.537746 run osmo-stp_10.42.42.5(pid=31207): stdout: | (launched: 2022-12-09_18:01:47.663693) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:01:49.672621 run osmo-stp_10.42.42.5(pid=31207): stderr: | �[0;m�[38;5;43m20221209180147856 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209180147856 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209180147856 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209180147857 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209180147857 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209180147857 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209180147858 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:01:49.828657 run patchelf(pid=31210): Terminating (SIGINT) 18:01:50.013098 run patchelf(pid=31210): Terminated: ok {rc=0} 18:01:50.046938 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=31207): Process ended prematurely: osmo-stp_10.42.42.5(pid=31207) [trial-2362↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31207)] [trial-2362↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 18:01:50.056928 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 18:01:50.120094 run osmo-hlr_10.42.42.2(pid=31204): ERR: Terminated: ERROR {rc=237} [trial-2362↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31204)] 18:01:50.171648 run osmo-hlr_10.42.42.2(pid=31204): stdout: | (launched: 2022-12-09_18:01:46.374164) 18:01:50.224168 run osmo-hlr_10.42.42.2(pid=31204): stderr: | �[0;m�[1;31m20221209180146634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209180146634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209180146634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209180146634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209180146634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209180146634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209180146651 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2362/run.2022-12-09_17-10-07/gprs:trx-lms+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209180146670 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209180146670 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209180146670 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:01:50.268732 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31197): Terminating (SIGTERM) 18:01:50.310577 run iperf3-srv_10.42.42.10(pid=31198): Terminating (SIGTERM) 18:01:50.352496 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31199): Terminating (SIGTERM) 18:01:50.394255 run iperf3-srv_10.42.42.10(pid=31200): Terminating (SIGTERM) 18:01:50.436122 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31203): Terminating (SIGTERM) 18:01:50.478005 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31206): Terminating (SIGTERM) 18:01:50.519888 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31209): Terminating (SIGTERM) 18:01:50.529673 --- ParallelTerminationStrategy: PID 31197 died... 18:01:50.586505 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31197): Terminated: ok {rc=0} 18:01:50.596554 --- ParallelTerminationStrategy: PID 31198 died... 18:01:50.652361 run iperf3-srv_10.42.42.10(pid=31198): Terminated {rc=256} 18:01:50.662453 --- ParallelTerminationStrategy: PID 31199 died... 18:01:50.718202 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31199): Terminated: ok {rc=0} 18:01:50.728249 --- ParallelTerminationStrategy: PID 31200 died... 18:01:50.783911 run iperf3-srv_10.42.42.10(pid=31200): Terminated {rc=256} 18:01:50.793981 --- ParallelTerminationStrategy: PID 31203 died... 18:01:50.849632 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31203): Terminated: ok {rc=0} 18:01:50.859695 --- ParallelTerminationStrategy: PID 31206 died... 18:01:50.915552 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31206): Terminated: ok {rc=0} 18:01:50.925740 --- ParallelTerminationStrategy: PID 31209 died... 18:01:50.981280 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31209): Terminated: ok {rc=0} 18:01:51.069075 bus /gobi_0: Setting Powered False 18:01:52.177936 bus /gobi_0: Setting Powered False 18:01:53.285511 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31207): Process ended prematurely: osmo-stp_10.42.42.5(pid=31207) [trial-2362↪gprs:trx-lms+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31207)]