Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=29161): Process ended prematurely: osmo-stp_10.42.42.5(pid=29161) [trial-2362↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29161)]
Standard Output
---------------------------------------------- trial-2362 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 17:44:29.210835 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:44:29.222217 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 17:44:29.389698 tst cs_paging_gprs_active.py: using LAC 22656 17:44:29.516563 tst cs_paging_gprs_active.py: using RAC 216 17:44:29.643958 tst cs_paging_gprs_active.py: using CellId 22656 17:44:29.770639 tst cs_paging_gprs_active.py: using BVCI 22657 17:44:29.795654 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:44:29.807116 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:44:29.818441 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:44:29.829819 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:44:29.841135 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:44:29.852287 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:44:29.863653 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:44:29.874845 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:44:29.886241 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 17:44:30.002716 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 17:44:30.284464 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 17:44:30.412313 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:44:30.730165 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29151): Launched 17:44:31.037199 run iperf3-srv_10.42.42.10(pid=29152): Launched 17:44:31.227902 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 17:44:31.364254 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:44:31.737997 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29153): Launched 17:44:32.023643 run iperf3-srv_10.42.42.10(pid=29154): Launched 17:44:32.214356 tst cs_paging_gprs_active.py:38: start network... 17:44:32.343243 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:44:32.827393 run create_hlr_db(pid=29155): Launched 17:44:33.002759 bus /gobi_6: Setting Powered False 17:44:34.023926 run create_hlr_db(pid=29155): Terminated: ok {rc=0} 17:44:34.430035 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29157): Launched 17:44:34.735154 run osmo-hlr_10.42.42.2(pid=29158): Launched 17:44:34.854735 run osmo-stp_10.42.42.5: Starting osmo-stp 17:44:35.391478 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29160): Launched 17:44:35.696239 run osmo-stp_10.42.42.5(pid=29161): Launched 17:44:35.806820 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:44:36.339919 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29163): Launched 17:44:36.448871 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:44:36.715566 run patchelf(pid=29164): Launched 17:44:36.894555 run osmo-stp_10.42.42.5(pid=29161): ERR: Terminated: ERROR {rc=1} [trial-2362↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29161)] 17:44:37.025132 run osmo-stp_10.42.42.5(pid=29161): stdout: | (launched: 2022-12-09_17:44:35.546250) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:44:37.156022 run osmo-stp_10.42.42.5(pid=29161): stderr: | �[0;m�[38;5;43m20221209174435717 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209174435718 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209174435718 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209174435718 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209174435719 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209174435719 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209174435719 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:44:37.282056 run osmo-stp_10.42.42.5(pid=29161): stdout: | (launched: 2022-12-09_17:44:35.546250) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:44:37.407090 run osmo-stp_10.42.42.5(pid=29161): stderr: | �[0;m�[38;5;43m20221209174435717 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209174435718 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209174435718 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209174435718 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209174435719 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209174435719 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209174435719 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:44:37.553147 run patchelf(pid=29164): Terminating (SIGINT) 17:44:37.724857 run patchelf(pid=29164): Terminated: ok {rc=0} 17:44:37.756515 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=29161): Process ended prematurely: osmo-stp_10.42.42.5(pid=29161) [trial-2362↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29161)] [trial-2362↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 17:44:37.765933 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 17:44:37.827118 run osmo-hlr_10.42.42.2(pid=29158): ERR: Terminated: ERROR {rc=237} [trial-2362↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29158)] 17:44:37.876794 run osmo-hlr_10.42.42.2(pid=29158): stdout: | (launched: 2022-12-09_17:44:34.584362) 17:44:37.926736 run osmo-hlr_10.42.42.2(pid=29158): stderr: | �[0;m�[1;31m20221209174434758 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209174434758 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209174434758 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209174434758 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209174434758 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209174434758 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209174434771 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2362/run.2022-12-09_17-10-07/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209174434782 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209174434782 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209174434782 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:44:37.969705 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29151): Terminating (SIGTERM) 17:44:38.009945 run iperf3-srv_10.42.42.10(pid=29152): Terminating (SIGTERM) 17:44:38.050456 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29153): Terminating (SIGTERM) 17:44:38.091058 run iperf3-srv_10.42.42.10(pid=29154): Terminating (SIGTERM) 17:44:38.131143 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29157): Terminating (SIGTERM) 17:44:38.171673 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29160): Terminating (SIGTERM) 17:44:38.211738 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29163): Terminating (SIGTERM) 17:44:38.221187 --- ParallelTerminationStrategy: PID 29151 died... 17:44:38.275334 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29151): Terminated: ok {rc=0} 17:44:38.285034 --- ParallelTerminationStrategy: PID 29152 died... 17:44:38.338170 run iperf3-srv_10.42.42.10(pid=29152): Terminated {rc=256} 17:44:38.348042 --- ParallelTerminationStrategy: PID 29153 died... 17:44:38.401225 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29153): Terminated: ok {rc=0} 17:44:38.411036 --- ParallelTerminationStrategy: PID 29154 died... 17:44:38.464148 run iperf3-srv_10.42.42.10(pid=29154): Terminated {rc=256} 17:44:38.473794 --- ParallelTerminationStrategy: PID 29157 died... 17:44:38.526788 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29157): Terminated: ok {rc=0} 17:44:38.536602 --- ParallelTerminationStrategy: PID 29160 died... 17:44:38.590035 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29160): Terminated: ok {rc=0} 17:44:38.599759 --- ParallelTerminationStrategy: PID 29163 died... 17:44:38.652888 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29163): Terminated: ok {rc=0} 17:44:38.741837 bus /gobi_0: Setting Powered False 17:44:39.845758 bus /gobi_0: Setting Powered False 17:44:40.957761 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29161): Process ended prematurely: osmo-stp_10.42.42.5(pid=29161) [trial-2362↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29161)]