Failed
gprs:nanobts+band-900.cs_paging_gprs_active.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=10550): Process ended prematurely: osmo-stp_10.42.42.5(pid=10550) [trial-2367↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10550)]
Standard Output
---------------------------------------------- trial-2367 gprs:nanobts+band-900 cs_paging_gprs_active.py ---------------------------------------------- 01:49:29.988460 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:49:29.998959 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 01:49:30.130904 tst cs_paging_gprs_active.py: using LAC 25150 01:49:30.245935 tst cs_paging_gprs_active.py: using RAC 160 01:49:30.369800 tst cs_paging_gprs_active.py: using CellId 25150 01:49:30.496180 tst cs_paging_gprs_active.py: using BVCI 25151 01:49:30.521162 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:49:30.532400 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:49:30.543469 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:49:30.554793 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:49:30.566053 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:49:30.577250 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:49:30.588559 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:49:30.599776 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:49:30.611123 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 01:49:30.724571 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 01:49:31.036561 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:49:31.171527 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:49:31.520600 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10540): Launched 01:49:31.803849 run iperf3-srv_10.42.42.10(pid=10541): Launched 01:49:31.988941 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:49:32.115960 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:49:32.426213 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10542): Launched 01:49:32.680768 run iperf3-srv_10.42.42.10(pid=10543): Launched 01:49:32.859795 tst cs_paging_gprs_active.py:38: start network... 01:49:32.982391 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:49:33.448252 run create_hlr_db(pid=10544): Launched 01:49:33.617498 bus /sierra_2: Setting Powered False 01:49:34.639597 run create_hlr_db(pid=10544): Terminated: ok {rc=0} 01:49:35.033631 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10546): Launched 01:49:35.330711 run osmo-hlr_10.42.42.2(pid=10547): Launched 01:49:35.437852 run osmo-stp_10.42.42.5: Starting osmo-stp 01:49:35.948899 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10549): Launched 01:49:36.245251 run osmo-stp_10.42.42.5(pid=10550): Launched 01:49:36.352762 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:49:36.866205 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10552): Launched 01:49:36.971211 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:49:37.228813 run patchelf(pid=10553): Launched 01:49:37.401731 run osmo-stp_10.42.42.5(pid=10550): ERR: Terminated: ERROR {rc=1} [trial-2367↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10550)] 01:49:37.528052 run osmo-stp_10.42.42.5(pid=10550): stdout: | (launched: 2022-12-10_01:49:36.098490) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:49:37.654349 run osmo-stp_10.42.42.5(pid=10550): stderr: | �[0;m�[38;5;43m20221210014936266 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210014936266 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210014936267 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210014936267 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210014936267 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210014936268 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210014936268 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:49:37.776225 run osmo-stp_10.42.42.5(pid=10550): stdout: | (launched: 2022-12-10_01:49:36.098490) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:49:37.897114 run osmo-stp_10.42.42.5(pid=10550): stderr: | �[0;m�[38;5;43m20221210014936266 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210014936266 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210014936267 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210014936267 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210014936267 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210014936268 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210014936268 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:49:38.037777 run patchelf(pid=10553): Terminating (SIGINT) 01:49:38.203062 run patchelf(pid=10553): Terminated: ok {rc=0} 01:49:38.233650 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10550): Process ended prematurely: osmo-stp_10.42.42.5(pid=10550) [trial-2367↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10550)] [trial-2367↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38] 01:49:38.242680 tst cs_paging_gprs_active.py:38: Test FAILED (8.3 sec) 01:49:38.302783 run osmo-hlr_10.42.42.2(pid=10547): ERR: Terminated: ERROR {rc=237} [trial-2367↪gprs:nanobts+band-900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10547)] 01:49:38.351443 run osmo-hlr_10.42.42.2(pid=10547): stdout: | (launched: 2022-12-10_01:49:35.183927) 01:49:38.400694 run osmo-hlr_10.42.42.2(pid=10547): stderr: | �[0;m�[1;31m20221210014935359 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210014935359 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210014935359 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210014935359 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210014935359 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210014935360 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210014935372 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:nanobts+band-900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210014935381 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210014935381 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210014935381 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:49:38.442138 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10540): Terminating (SIGTERM) 01:49:38.481210 run iperf3-srv_10.42.42.10(pid=10541): Terminating (SIGTERM) 01:49:38.520233 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10542): Terminating (SIGTERM) 01:49:38.559184 run iperf3-srv_10.42.42.10(pid=10543): Terminating (SIGTERM) 01:49:38.598118 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10546): Terminating (SIGTERM) 01:49:38.637158 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10549): Terminating (SIGTERM) 01:49:38.676179 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10552): Terminating (SIGTERM) 01:49:38.685594 --- ParallelTerminationStrategy: PID 10540 died... 01:49:38.738034 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10540): Terminated: ok {rc=0} 01:49:38.747744 --- ParallelTerminationStrategy: PID 10541 died... 01:49:38.800170 run iperf3-srv_10.42.42.10(pid=10541): Terminated {rc=256} 01:49:38.809637 --- ParallelTerminationStrategy: PID 10542 died... 01:49:38.861899 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10542): Terminated: ok {rc=0} 01:49:38.871293 --- ParallelTerminationStrategy: PID 10543 died... 01:49:38.923222 run iperf3-srv_10.42.42.10(pid=10543): Terminated {rc=256} 01:49:38.932859 --- ParallelTerminationStrategy: PID 10546 died... 01:49:38.984710 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10546): Terminated: ok {rc=0} 01:49:38.994591 --- ParallelTerminationStrategy: PID 10549 died... 01:49:39.047117 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10549): Terminated: ok {rc=0} 01:49:39.056641 --- ParallelTerminationStrategy: PID 10552 died... 01:49:39.109464 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10552): Terminated: ok {rc=0} 01:49:39.197353 bus /gobi_0: Setting Powered False 01:49:40.300012 bus /gobi_0: Setting Powered False 01:49:41.404503 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10550): Process ended prematurely: osmo-stp_10.42.42.5(pid=10550) [trial-2367↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10550)]