Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-lms.ping.py (from gprs_trx-lms)

Failing for the past 42 builds (Since #2327 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=16346): Process ended prematurely: osmo-stp_10.42.42.5(pid=16346) [trial-2368↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16346)]

Standard Output

----------------------------------------------
trial-2368 gprs:trx-lms ping.py
----------------------------------------------
02:56:24.282374 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
02:56:24.293354 tst                     gprs:trx-lms: Using 1 x bts (candidates: 1)
02:56:24.429985 tst                          ping.py: using LAC 25501
02:56:24.552097 tst                          ping.py: using RAC 1
02:56:24.675380 tst                          ping.py: using CellId 25501
02:56:24.799894 tst                          ping.py: using BVCI 25502
02:56:24.824519 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
02:56:24.835444 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
02:56:24.846696 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
02:56:24.858266 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
02:56:24.870128 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
02:56:24.881979 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
02:56:24.892833 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
02:56:24.904167 tst                     gprs:trx-lms: Using 1 x modem (candidates: 4)
02:56:25.179205 tst                       ping.py:19: start network...
02:56:25.302380 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
02:56:25.769764 run         create_hlr_db(pid=16340): Launched
02:56:25.941675 bus                          /gobi_6: Setting Powered False
02:56:26.962840 run         create_hlr_db(pid=16340): Terminated: ok {rc=0}
02:56:27.386183 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16342): Launched
02:56:27.704581 run   osmo-hlr_10.42.42.2(pid=16343): Launched
02:56:27.824475 run              osmo-stp_10.42.42.5: Starting osmo-stp
02:56:28.381406 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16345): Launched
02:56:28.699607 run   osmo-stp_10.42.42.5(pid=16346): Launched
02:56:28.819644 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
02:56:29.374731 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16348): Launched
02:56:29.488086 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
02:56:29.767264 run              patchelf(pid=16349): Launched
02:56:29.954664 run   osmo-stp_10.42.42.5(pid=16346): ERR: Terminated: ERROR {rc=1}  [trial-2368↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16346)]
02:56:30.091139 run   osmo-stp_10.42.42.5(pid=16346): stdout: 
| (launched: 2022-12-10_02:56:28.543309)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
02:56:30.228354 run   osmo-stp_10.42.42.5(pid=16346): stderr: 
| �[0;m�[38;5;43m20221210025628737 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210025628737 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210025628737 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210025628738 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210025628738 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210025628738 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210025628738 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
02:56:30.360507 run   osmo-stp_10.42.42.5(pid=16346): stdout: 
| (launched: 2022-12-10_02:56:28.543309)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
02:56:30.492488 run   osmo-stp_10.42.42.5(pid=16346): stderr: 
| �[0;m�[38;5;43m20221210025628737 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210025628737 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210025628737 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210025628738 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210025628738 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210025628738 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210025628738 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
02:56:30.645467 run              patchelf(pid=16349): Terminating (SIGINT)
02:56:30.824192 run              patchelf(pid=16349): Terminated: ok {rc=0}
02:56:30.866051 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=16346): Process ended prematurely: osmo-stp_10.42.42.5(pid=16346) [trial-2368↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16346)]  [trial-2368↪gprs:trx-lms↪ping.py:22]
02:56:30.875826 tst                       ping.py:22: Test FAILED (6.6 sec)
02:56:30.948648 run   osmo-hlr_10.42.42.2(pid=16343): ERR: Terminated: ERROR {rc=237}  [trial-2368↪gprs:trx-lms↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16343)]
02:56:31.001760 run   osmo-hlr_10.42.42.2(pid=16343): stdout: 
| (launched: 2022-12-10_02:56:27.548152) 
02:56:31.064229 run   osmo-hlr_10.42.42.2(pid=16343): stderr: 
| �[0;m�[1;31m20221210025627745 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221210025627745 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221210025627745 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221210025627745 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221210025627745 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221210025627745 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221210025627758 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2368/run.2022-12-10_02-07-09/gprs:trx-lms/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221210025627766 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210025627767 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210025627767 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
02:56:31.110072 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16342): Terminating (SIGTERM)
02:56:31.153696 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16345): Terminating (SIGTERM)
02:56:31.197383 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16348): Terminating (SIGTERM)
02:56:31.207303 ---      ParallelTerminationStrategy: PID 16342 died...
02:56:31.265804 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16342): Terminated: ok {rc=0}
02:56:31.276543 ---      ParallelTerminationStrategy: PID 16345 died...
02:56:31.336870 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16345): Terminated: ok {rc=0}
02:56:31.347508 ---      ParallelTerminationStrategy: PID 16348 died...
02:56:31.404940 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16348): Terminated: ok {rc=0}
02:56:31.494746 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16346): Process ended prematurely: osmo-stp_10.42.42.5(pid=16346) [trial-2368↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16346)]