Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-umtrx.ping.py (from gprs_trx-umtrx)

Failing for the past 171 builds (Since #2200 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=2154): Process ended prematurely: osmo-stp_10.42.42.5(pid=2154) [trial-2370↪gprs:trx-umtrx↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2154)]

Standard Output

----------------------------------------------
trial-2370 gprs:trx-umtrx ping.py
----------------------------------------------
06:07:53.711467 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
06:07:53.722892 tst                   gprs:trx-umtrx: Using 1 x bts (candidates: 1)
06:07:53.861766 tst                          ping.py: using LAC 26376
06:07:53.985055 tst                          ping.py: using RAC 111
06:07:54.108172 tst                          ping.py: using CellId 26376
06:07:54.229268 tst                          ping.py: using BVCI 26377
06:07:54.252847 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
06:07:54.263681 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
06:07:54.274559 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
06:07:54.285274 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
06:07:54.295849 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
06:07:54.306474 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
06:07:54.317295 tst                   gprs:trx-umtrx: Using 1 x ip_address (candidates: 9)
06:07:54.328026 tst                   gprs:trx-umtrx: Using 1 x modem (candidates: 4)
06:07:54.609201 tst                       ping.py:19: start network...
06:07:54.737606 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
06:07:55.229874 run          create_hlr_db(pid=2148): Launched
06:07:55.408598 bus                          /gobi_6: Setting Powered False
06:07:56.429642 run          create_hlr_db(pid=2148): Terminated: ok {rc=0}
06:07:56.817030 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2150): Launched
06:07:57.104099 run    osmo-hlr_10.42.42.2(pid=2151): Launched
06:07:57.215521 run              osmo-stp_10.42.42.5: Starting osmo-stp
06:07:57.725363 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2153): Launched
06:07:58.013123 run    osmo-stp_10.42.42.5(pid=2154): Launched
06:07:58.117675 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
06:07:58.619301 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2156): Launched
06:07:58.721949 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
06:07:58.973565 run               patchelf(pid=2157): Launched
06:07:59.143714 run    osmo-stp_10.42.42.5(pid=2154): ERR: Terminated: ERROR {rc=1}  [trial-2370↪gprs:trx-umtrx↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2154)]
06:07:59.268418 run    osmo-stp_10.42.42.5(pid=2154): stdout: 
| (launched: 2022-12-10_06:07:57.870726)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
06:07:59.394058 run    osmo-stp_10.42.42.5(pid=2154): stderr: 
| �[0;m�[38;5;43m20221210060758040 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210060758041 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210060758041 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210060758041 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210060758042 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210060758042 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210060758042 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
06:07:59.514793 run    osmo-stp_10.42.42.5(pid=2154): stdout: 
| (launched: 2022-12-10_06:07:57.870726)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
06:07:59.634008 run    osmo-stp_10.42.42.5(pid=2154): stderr: 
| �[0;m�[38;5;43m20221210060758040 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210060758041 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210060758041 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210060758041 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210060758042 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210060758042 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210060758042 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
06:07:59.772614 run               patchelf(pid=2157): Terminating (SIGINT)
06:07:59.935494 run               patchelf(pid=2157): Terminated: ok {rc=0}
06:07:59.965425 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=2154): Process ended prematurely: osmo-stp_10.42.42.5(pid=2154) [trial-2370↪gprs:trx-umtrx↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2154)]  [trial-2370↪gprs:trx-umtrx↪ping.py:22]
06:07:59.974118 tst                       ping.py:22: Test FAILED (6.3 sec)
06:08:00.033667 run    osmo-hlr_10.42.42.2(pid=2151): ERR: Terminated: ERROR {rc=237}  [trial-2370↪gprs:trx-umtrx↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2151)]
06:08:00.081961 run    osmo-hlr_10.42.42.2(pid=2151): stdout: 
| (launched: 2022-12-10_06:07:56.962808) 
06:08:00.130865 run    osmo-hlr_10.42.42.2(pid=2151): stderr: 
| �[0;m�[1;31m20221210060757134 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221210060757134 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221210060757135 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221210060757135 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221210060757135 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221210060757135 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221210060757147 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2370/run.2022-12-10_05-27-43/gprs:trx-umtrx/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221210060757156 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210060757157 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210060757157 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
06:08:00.172107 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2150): Terminating (SIGTERM)
06:08:00.211596 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2153): Terminating (SIGTERM)
06:08:00.251047 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2156): Terminating (SIGTERM)
06:08:00.260042 ---      ParallelTerminationStrategy: PID 2150 died...
06:08:00.312596 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2150): Terminated: ok {rc=0}
06:08:00.322307 ---      ParallelTerminationStrategy: PID 2153 died...
06:08:00.374529 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2153): Terminated: ok {rc=0}
06:08:00.384158 ---      ParallelTerminationStrategy: PID 2156 died...
06:08:00.436342 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2156): Terminated: ok {rc=0}
06:08:00.518503 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2154): Process ended prematurely: osmo-stp_10.42.42.5(pid=2154) [trial-2370↪gprs:trx-umtrx↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2154)]