Failed
gprs:oc2g+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=32141): Process ended prematurely: osmo-stp_10.42.42.5(pid=32141) [trial-2370↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32141)]
Standard Output
---------------------------------------------- trial-2370 gprs:oc2g+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 05:45:22.176159 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:45:22.188051 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 05:45:22.333115 tst ping_idle_ping.py: using LAC 26255 05:45:22.450080 tst ping_idle_ping.py: using RAC 245 05:45:22.567198 tst ping_idle_ping.py: using CellId 26255 05:45:22.686491 tst ping_idle_ping.py: using BVCI 26256 05:45:22.709418 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:45:22.720241 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:45:22.730990 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:45:22.742018 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:45:22.752917 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:45:22.763797 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:45:22.774867 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 05:45:22.785830 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 05:45:23.075814 tst ping_idle_ping.py:24: start network... 05:45:23.209192 run osmo-hlr_10.42.42.2: Starting osmo-hlr 05:45:23.713669 run create_hlr_db(pid=32135): Launched 05:45:23.886406 bus /gobi_6: Setting Powered False 05:45:24.906580 run create_hlr_db(pid=32135): Terminated: ok {rc=0} 05:45:25.306082 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32137): Launched 05:45:25.607464 run osmo-hlr_10.42.42.2(pid=32138): Launched 05:45:25.721851 run osmo-stp_10.42.42.5: Starting osmo-stp 05:45:26.248706 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32140): Launched 05:45:26.549974 run osmo-stp_10.42.42.5(pid=32141): Launched 05:45:26.660467 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 05:45:27.186518 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32143): Launched 05:45:27.293156 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 05:45:27.556003 run patchelf(pid=32144): Launched 05:45:27.731945 run osmo-stp_10.42.42.5(pid=32141): ERR: Terminated: ERROR {rc=1} [trial-2370↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32141)] 05:45:27.860631 run osmo-stp_10.42.42.5(pid=32141): stdout: | (launched: 2022-12-10_05:45:26.399888) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:45:27.989771 run osmo-stp_10.42.42.5(pid=32141): stderr: | �[0;m�[38;5;43m20221210054526572 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210054526572 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210054526572 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210054526573 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210054526573 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210054526573 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210054526573 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:45:28.113673 run osmo-stp_10.42.42.5(pid=32141): stdout: | (launched: 2022-12-10_05:45:26.399888) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:45:28.236373 run osmo-stp_10.42.42.5(pid=32141): stderr: | �[0;m�[38;5;43m20221210054526572 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210054526572 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210054526572 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210054526573 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210054526573 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210054526573 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210054526573 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:45:28.379112 run patchelf(pid=32144): Terminating (SIGINT) 05:45:28.547263 run patchelf(pid=32144): Terminated: ok {rc=0} 05:45:28.577886 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=32141): Process ended prematurely: osmo-stp_10.42.42.5(pid=32141) [trial-2370↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32141)] [trial-2370↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 05:45:28.586655 tst ping_idle_ping.py:27: Test FAILED (6.4 sec) 05:45:28.646781 run osmo-hlr_10.42.42.2(pid=32138): ERR: Terminated: ERROR {rc=237} [trial-2370↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=32138)] 05:45:28.695797 run osmo-hlr_10.42.42.2(pid=32138): stdout: | (launched: 2022-12-10_05:45:25.457568) 05:45:28.745423 run osmo-hlr_10.42.42.2(pid=32138): stderr: | �[0;m�[1;31m20221210054525634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210054525634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210054525634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210054525634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210054525634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210054525634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210054525646 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2370/run.2022-12-10_05-27-43/gprs:oc2g+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210054525654 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210054525655 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210054525655 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 05:45:28.787258 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32137): Terminating (SIGTERM) 05:45:28.827137 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32140): Terminating (SIGTERM) 05:45:28.867425 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32143): Terminating (SIGTERM) 05:45:28.876553 --- ParallelTerminationStrategy: PID 32137 died... 05:45:28.929758 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32137): Terminated: ok {rc=0} 05:45:28.939392 --- ParallelTerminationStrategy: PID 32140 died... 05:45:28.992517 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32140): Terminated: ok {rc=0} 05:45:29.002005 --- ParallelTerminationStrategy: PID 32143 died... 05:45:29.055006 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32143): Terminated: ok {rc=0} 05:45:29.144220 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=32141): Process ended prematurely: osmo-stp_10.42.42.5(pid=32141) [trial-2370↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32141)]