Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=1738): Process ended prematurely: osmo-stp_10.42.42.5(pid=1738) [trial-2370↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1738)]
Standard Output
---------------------------------------------- trial-2370 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 06:01:58.280392 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:01:58.291407 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 06:01:58.449111 tst cs_paging_gprs_active.py: using LAC 26344 06:01:58.567554 tst cs_paging_gprs_active.py: using RAC 79 06:01:58.685664 tst cs_paging_gprs_active.py: using CellId 26344 06:01:58.803866 tst cs_paging_gprs_active.py: using BVCI 26345 06:01:58.826965 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:01:58.837939 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:01:58.848863 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:01:58.859980 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:01:58.871044 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:01:58.881976 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:01:58.893381 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:01:58.904294 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:01:58.915558 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 06:01:59.033220 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 06:01:59.311854 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 06:01:59.437174 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:01:59.751170 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1728): Launched 06:02:00.010981 run iperf3-srv_10.42.42.10(pid=1729): Launched 06:02:00.194528 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 06:02:00.319779 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:02:00.632021 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1730): Launched 06:02:00.892084 run iperf3-srv_10.42.42.10(pid=1731): Launched 06:02:01.079183 tst cs_paging_gprs_active.py:38: start network... 06:02:01.208574 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:02:01.738596 run create_hlr_db(pid=1732): Launched 06:02:01.932298 bus /gobi_6: Setting Powered False 06:02:02.946077 run create_hlr_db(pid=1732): Terminated: ok {rc=0} 06:02:03.354520 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1734): Launched 06:02:03.655306 run osmo-hlr_10.42.42.2(pid=1735): Launched 06:02:03.769602 run osmo-stp_10.42.42.5: Starting osmo-stp 06:02:04.345333 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1737): Launched 06:02:04.704078 run osmo-stp_10.42.42.5(pid=1738): Launched 06:02:04.847889 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:02:05.441672 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1740): Launched 06:02:05.565725 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:02:05.846329 run patchelf(pid=1741): Launched 06:02:06.034646 run osmo-stp_10.42.42.5(pid=1738): ERR: Terminated: ERROR {rc=1} [trial-2370↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1738)] 06:02:06.172217 run osmo-stp_10.42.42.5(pid=1738): stdout: | (launched: 2022-12-10_06:02:04.519118) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:02:06.310802 run osmo-stp_10.42.42.5(pid=1738): stderr: | �[0;m�[38;5;43m20221210060204712 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210060204712 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210060204712 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210060204712 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210060204713 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210060204713 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210060204713 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:02:06.444282 run osmo-stp_10.42.42.5(pid=1738): stdout: | (launched: 2022-12-10_06:02:04.519118) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:02:06.576378 run osmo-stp_10.42.42.5(pid=1738): stderr: | �[0;m�[38;5;43m20221210060204712 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210060204712 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210060204712 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210060204712 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210060204713 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210060204713 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210060204713 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:02:06.729816 run patchelf(pid=1741): Terminating (SIGINT) 06:02:06.909928 run patchelf(pid=1741): Terminated: ok {rc=0} 06:02:06.943402 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=1738): Process ended prematurely: osmo-stp_10.42.42.5(pid=1738) [trial-2370↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1738)] [trial-2370↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 06:02:06.953500 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 06:02:07.016376 run osmo-hlr_10.42.42.2(pid=1735): ERR: Terminated: ERROR {rc=237} [trial-2370↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1735)] 06:02:07.068234 run osmo-hlr_10.42.42.2(pid=1735): stdout: | (launched: 2022-12-10_06:02:03.507147) 06:02:07.120414 run osmo-hlr_10.42.42.2(pid=1735): stderr: | �[0;m�[1;31m20221210060203682 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210060203682 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210060203682 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210060203682 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210060203682 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210060203682 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210060203694 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2370/run.2022-12-10_05-27-43/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210060203703 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210060203703 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210060203703 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:02:07.164691 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1728): Terminating (SIGTERM) 06:02:07.206299 run iperf3-srv_10.42.42.10(pid=1729): Terminating (SIGTERM) 06:02:07.248200 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1730): Terminating (SIGTERM) 06:02:07.290552 run iperf3-srv_10.42.42.10(pid=1731): Terminating (SIGTERM) 06:02:07.332761 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1734): Terminating (SIGTERM) 06:02:07.374803 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1737): Terminating (SIGTERM) 06:02:07.416570 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1740): Terminating (SIGTERM) 06:02:07.426064 --- ParallelTerminationStrategy: PID 1728 died... 06:02:07.481659 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1728): Terminated: ok {rc=0} 06:02:07.491884 --- ParallelTerminationStrategy: PID 1729 died... 06:02:07.547291 run iperf3-srv_10.42.42.10(pid=1729): Terminated {rc=256} 06:02:07.557362 --- ParallelTerminationStrategy: PID 1730 died... 06:02:07.613031 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1730): Terminated: ok {rc=0} 06:02:07.623076 --- ParallelTerminationStrategy: PID 1731 died... 06:02:07.678328 run iperf3-srv_10.42.42.10(pid=1731): Terminated {rc=256} 06:02:07.688558 --- ParallelTerminationStrategy: PID 1734 died... 06:02:07.743909 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1734): Terminated: ok {rc=0} 06:02:07.754210 --- ParallelTerminationStrategy: PID 1737 died... 06:02:07.809693 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1737): Terminated: ok {rc=0} 06:02:07.819757 --- ParallelTerminationStrategy: PID 1740 died... 06:02:07.875247 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1740): Terminated: ok {rc=0} 06:02:07.962753 bus /gobi_0: Setting Powered False 06:02:09.065556 bus /gobi_0: Setting Powered False 06:02:10.176343 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1738): Process ended prematurely: osmo-stp_10.42.42.5(pid=1738) [trial-2370↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1738)]