Failed
gprs:trx-sysmocell5000.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000)
Stacktrace
osmo-stp_10.42.42.5(pid=1493): Process ended prematurely: osmo-stp_10.42.42.5(pid=1493) [trial-2370↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1493)]
Standard Output
---------------------------------------------- trial-2370 gprs:trx-sysmocell5000 cs_paging_gprs_active.py ---------------------------------------------- 05:58:58.759386 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 05:58:58.770109 tst gprs:trx-sysmocell5000: Using 1 x bts (candidates: 1) 05:58:58.906985 tst cs_paging_gprs_active.py: using LAC 26329 05:58:59.026546 tst cs_paging_gprs_active.py: using RAC 64 05:58:59.144401 tst cs_paging_gprs_active.py: using CellId 26329 05:58:59.264175 tst cs_paging_gprs_active.py: using BVCI 26330 05:58:59.287080 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 05:58:59.297863 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 05:58:59.308377 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 05:58:59.319190 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 05:58:59.330006 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 05:58:59.340643 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 05:58:59.351543 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 05:58:59.362244 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 05:58:59.373243 tst gprs:trx-sysmocell5000: Using 1 x modem (candidates: 4) 05:58:59.488296 tst gprs:trx-sysmocell5000: Using 1 x modem (candidates: 4) 05:58:59.765616 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 05:58:59.890039 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:59:00.203425 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1483): Launched 05:59:00.462856 run iperf3-srv_10.42.42.10(pid=1484): Launched 05:59:00.645673 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 05:59:00.770509 run iperf3-srv_10.42.42.10: Starting iperf3-srv 05:59:01.129360 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1485): Launched 05:59:01.409721 run iperf3-srv_10.42.42.10(pid=1486): Launched 05:59:01.596222 tst cs_paging_gprs_active.py:38: start network... 05:59:01.724416 run osmo-hlr_10.42.42.2: Starting osmo-hlr 05:59:02.233685 run create_hlr_db(pid=1487): Launched 05:59:02.406259 bus /sierra_2: Setting Powered False 05:59:03.427993 run create_hlr_db(pid=1487): Terminated: ok {rc=0} 05:59:03.828142 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1489): Launched 05:59:04.128940 run osmo-hlr_10.42.42.2(pid=1490): Launched 05:59:04.243482 run osmo-stp_10.42.42.5: Starting osmo-stp 05:59:04.775150 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1492): Launched 05:59:05.075695 run osmo-stp_10.42.42.5(pid=1493): Launched 05:59:05.185036 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 05:59:05.710973 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1495): Launched 05:59:05.818324 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 05:59:06.080753 run patchelf(pid=1496): Launched 05:59:06.257300 run osmo-stp_10.42.42.5(pid=1493): ERR: Terminated: ERROR {rc=1} [trial-2370↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1493)] 05:59:06.386231 run osmo-stp_10.42.42.5(pid=1493): stdout: | (launched: 2022-12-10_05:59:04.927202) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:59:06.515292 run osmo-stp_10.42.42.5(pid=1493): stderr: | �[0;m�[38;5;43m20221210055905094 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210055905094 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210055905094 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210055905095 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210055905097 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210055905097 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210055905097 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:59:06.639904 run osmo-stp_10.42.42.5(pid=1493): stdout: | (launched: 2022-12-10_05:59:04.927202) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 05:59:06.763222 run osmo-stp_10.42.42.5(pid=1493): stderr: | �[0;m�[38;5;43m20221210055905094 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210055905094 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210055905094 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210055905095 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210055905097 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210055905097 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210055905097 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 05:59:06.906781 run patchelf(pid=1496): Terminating (SIGINT) 05:59:07.075221 run patchelf(pid=1496): Terminated: ok {rc=0} 05:59:07.106381 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=1493): Process ended prematurely: osmo-stp_10.42.42.5(pid=1493) [trial-2370↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1493)] [trial-2370↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38] 05:59:07.115756 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 05:59:07.175292 run osmo-hlr_10.42.42.2(pid=1490): ERR: Terminated: ERROR {rc=237} [trial-2370↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1490)] 05:59:07.223755 run osmo-hlr_10.42.42.2(pid=1490): stdout: | (launched: 2022-12-10_05:59:03.980646) 05:59:07.273140 run osmo-hlr_10.42.42.2(pid=1490): stderr: | �[0;m�[1;31m20221210055904158 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210055904158 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210055904158 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210055904158 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210055904158 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210055904158 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210055904170 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2370/run.2022-12-10_05-27-43/gprs:trx-sysmocell5000/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210055904179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210055904179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210055904179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 05:59:07.314511 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1483): Terminating (SIGTERM) 05:59:07.353886 run iperf3-srv_10.42.42.10(pid=1484): Terminating (SIGTERM) 05:59:07.393156 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1485): Terminating (SIGTERM) 05:59:07.432376 run iperf3-srv_10.42.42.10(pid=1486): Terminating (SIGTERM) 05:59:07.471716 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1489): Terminating (SIGTERM) 05:59:07.510980 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1492): Terminating (SIGTERM) 05:59:07.550360 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1495): Terminating (SIGTERM) 05:59:07.559598 --- ParallelTerminationStrategy: PID 1483 died... 05:59:07.613063 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1483): Terminated: ok {rc=0} 05:59:07.622484 --- ParallelTerminationStrategy: PID 1484 died... 05:59:07.675317 run iperf3-srv_10.42.42.10(pid=1484): Terminated {rc=256} 05:59:07.684600 --- ParallelTerminationStrategy: PID 1485 died... 05:59:07.736840 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1485): Terminated: ok {rc=0} 05:59:07.746438 --- ParallelTerminationStrategy: PID 1486 died... 05:59:07.799014 run iperf3-srv_10.42.42.10(pid=1486): Terminated {rc=256} 05:59:07.808416 --- ParallelTerminationStrategy: PID 1489 died... 05:59:07.861005 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1489): Terminated: ok {rc=0} 05:59:07.870452 --- ParallelTerminationStrategy: PID 1492 died... 05:59:07.923769 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1492): Terminated: ok {rc=0} 05:59:07.933668 --- ParallelTerminationStrategy: PID 1495 died... 05:59:07.986918 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1495): Terminated: ok {rc=0} 05:59:08.075157 bus /gobi_0: Setting Powered False 05:59:09.178419 bus /gobi_0: Setting Powered False 05:59:10.285312 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1493): Process ended prematurely: osmo-stp_10.42.42.5(pid=1493) [trial-2370↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1493)]