Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=2952): Process ended prematurely: osmo-stp_10.42.42.5(pid=2952) [trial-2370↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2952)]
Standard Output
---------------------------------------------- trial-2370 gprs:trx-umtrx+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 06:10:11.073659 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:10:11.084430 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 06:10:11.238006 tst cs_paging_gprs_active.py: using LAC 26388 06:10:11.352421 tst cs_paging_gprs_active.py: using RAC 123 06:10:11.468533 tst cs_paging_gprs_active.py: using CellId 26388 06:10:11.586992 tst cs_paging_gprs_active.py: using BVCI 26389 06:10:11.609202 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:10:11.620011 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:10:11.630692 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:10:11.641789 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:10:11.652739 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:10:11.663654 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:10:11.674661 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:10:11.685570 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 06:10:11.696537 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 06:10:11.814650 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 06:10:12.089832 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 06:10:12.210588 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:10:12.543539 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2594): Launched 06:10:12.834429 run iperf3-srv_10.42.42.10(pid=2613): Launched 06:10:13.031608 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 06:10:13.165906 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:10:13.509747 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2756): Launched 06:10:13.801831 run iperf3-srv_10.42.42.10(pid=2786): Launched 06:10:13.985352 tst cs_paging_gprs_active.py:38: start network... 06:10:14.118520 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:10:14.630628 run create_hlr_db(pid=2946): Launched 06:10:14.809936 bus /gobi_6: Setting Powered False 06:10:15.842219 run create_hlr_db(pid=2946): Terminated: ok {rc=0} 06:10:16.293225 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2948): Launched 06:10:16.624005 run osmo-hlr_10.42.42.2(pid=2949): Launched 06:10:16.862548 run osmo-stp_10.42.42.5: Starting osmo-stp 06:10:17.653230 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2951): Launched 06:10:17.964662 run osmo-stp_10.42.42.5(pid=2952): Launched 06:10:18.076736 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:10:18.621942 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2954): Launched 06:10:18.732893 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:10:19.006893 run patchelf(pid=2955): Launched 06:10:19.190800 run osmo-stp_10.42.42.5(pid=2952): ERR: Terminated: ERROR {rc=1} [trial-2370↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2952)] 06:10:19.324599 run osmo-stp_10.42.42.5(pid=2952): stdout: | (launched: 2022-12-10_06:10:17.812029) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:10:19.458898 run osmo-stp_10.42.42.5(pid=2952): stderr: | �[0;m�[38;5;43m20221210061018004 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210061018004 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210061018004 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210061018005 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210061018005 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210061018005 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210061018005 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:10:19.588864 run osmo-stp_10.42.42.5(pid=2952): stdout: | (launched: 2022-12-10_06:10:17.812029) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:10:19.717752 run osmo-stp_10.42.42.5(pid=2952): stderr: | �[0;m�[38;5;43m20221210061018004 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210061018004 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210061018004 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210061018005 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210061018005 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210061018005 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210061018005 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:10:19.866653 run patchelf(pid=2955): Terminating (SIGINT) 06:10:20.041825 run patchelf(pid=2955): Terminated: ok {rc=0} 06:10:20.074237 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=2952): Process ended prematurely: osmo-stp_10.42.42.5(pid=2952) [trial-2370↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2952)] [trial-2370↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 06:10:20.084036 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 06:10:20.146084 run osmo-hlr_10.42.42.2(pid=2949): ERR: Terminated: ERROR {rc=237} [trial-2370↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2949)] 06:10:20.196758 run osmo-hlr_10.42.42.2(pid=2949): stdout: | (launched: 2022-12-10_06:10:16.454357) 06:10:20.248213 run osmo-hlr_10.42.42.2(pid=2949): stderr: | �[0;m�[1;31m20221210061016917 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210061016917 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210061016917 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210061016917 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210061016917 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210061016918 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210061016944 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2370/run.2022-12-10_05-27-43/gprs:trx-umtrx+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210061016963 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210061016964 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210061016964 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:10:20.292012 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2594): Terminating (SIGTERM) 06:10:20.333415 run iperf3-srv_10.42.42.10(pid=2613): Terminating (SIGTERM) 06:10:20.374804 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2756): Terminating (SIGTERM) 06:10:20.416060 run iperf3-srv_10.42.42.10(pid=2786): Terminating (SIGTERM) 06:10:20.457497 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2948): Terminating (SIGTERM) 06:10:20.498794 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2951): Terminating (SIGTERM) 06:10:20.540077 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2954): Terminating (SIGTERM) 06:10:20.549905 --- ParallelTerminationStrategy: PID 2594 died... 06:10:20.605327 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2594): Terminated: ok {rc=0} 06:10:20.615226 --- ParallelTerminationStrategy: PID 2613 died... 06:10:20.670158 run iperf3-srv_10.42.42.10(pid=2613): Terminated {rc=256} 06:10:20.680032 --- ParallelTerminationStrategy: PID 2756 died... 06:10:20.735230 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2756): Terminated: ok {rc=0} 06:10:20.745253 --- ParallelTerminationStrategy: PID 2786 died... 06:10:20.800008 run iperf3-srv_10.42.42.10(pid=2786): Terminated {rc=256} 06:10:20.809863 --- ParallelTerminationStrategy: PID 2948 died... 06:10:20.864685 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2948): Terminated: ok {rc=0} 06:10:20.874559 --- ParallelTerminationStrategy: PID 2951 died... 06:10:20.929263 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2951): Terminated: ok {rc=0} 06:10:20.939076 --- ParallelTerminationStrategy: PID 2954 died... 06:10:20.993788 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2954): Terminated: ok {rc=0} 06:10:21.079667 bus /gobi_0: Setting Powered False 06:10:22.184225 bus /gobi_0: Setting Powered False 06:10:23.293540 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2952): Process ended prematurely: osmo-stp_10.42.42.5(pid=2952) [trial-2370↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2952)]