Failed
gprs:nanobts+band-900.cs_paging_gprs_active.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=14456): Process ended prematurely: osmo-stp_10.42.42.5(pid=14456) [trial-2371↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14456)]
Standard Output
---------------------------------------------- trial-2371 gprs:nanobts+band-900 cs_paging_gprs_active.py ---------------------------------------------- 08:03:11.352074 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 08:03:11.362645 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 08:03:11.495171 tst cs_paging_gprs_active.py: using LAC 26994 08:03:11.612764 tst cs_paging_gprs_active.py: using RAC 219 08:03:11.730190 tst cs_paging_gprs_active.py: using CellId 26994 08:03:11.845599 tst cs_paging_gprs_active.py: using BVCI 26995 08:03:11.867976 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 08:03:11.878583 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 08:03:11.888887 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 08:03:11.899479 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 08:03:11.909982 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 08:03:11.920527 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 08:03:11.931315 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 08:03:11.941912 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 08:03:11.952521 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 08:03:12.068257 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 08:03:12.342593 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:03:12.464435 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:03:12.768747 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14446): Launched 08:03:13.023020 run iperf3-srv_10.42.42.10(pid=14447): Launched 08:03:13.202139 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:03:13.324098 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:03:13.629193 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14448): Launched 08:03:13.882049 run iperf3-srv_10.42.42.10(pid=14449): Launched 08:03:14.060662 tst cs_paging_gprs_active.py:38: start network... 08:03:14.182999 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:03:14.651966 run create_hlr_db(pid=14450): Launched 08:03:14.820714 bus /sierra_2: Setting Powered False 08:03:15.868526 run create_hlr_db(pid=14450): Terminated: ok {rc=0} 08:03:16.325074 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14452): Launched 08:03:16.757143 run osmo-hlr_10.42.42.2(pid=14453): Launched 08:03:16.904072 run osmo-stp_10.42.42.5: Starting osmo-stp 08:03:17.507972 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14455): Launched 08:03:17.822506 run osmo-stp_10.42.42.5(pid=14456): Launched 08:03:17.936739 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:03:18.486520 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14458): Launched 08:03:18.598888 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:03:18.873145 run patchelf(pid=14459): Launched 08:03:19.058554 run osmo-stp_10.42.42.5(pid=14456): ERR: Terminated: ERROR {rc=1} [trial-2371↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14456)] 08:03:19.193612 run osmo-stp_10.42.42.5(pid=14456): stdout: | (launched: 2022-12-10_08:03:17.668369) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:03:19.329119 run osmo-stp_10.42.42.5(pid=14456): stderr: | �[0;m�[38;5;43m20221210080317858 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210080317858 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210080317859 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210080317859 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210080317859 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210080317859 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210080317860 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:03:19.459318 run osmo-stp_10.42.42.5(pid=14456): stdout: | (launched: 2022-12-10_08:03:17.668369) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:03:19.587999 run osmo-stp_10.42.42.5(pid=14456): stderr: | �[0;m�[38;5;43m20221210080317858 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210080317858 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210080317859 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210080317859 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210080317859 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210080317859 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210080317860 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:03:19.739022 run patchelf(pid=14459): Terminating (SIGINT) 08:03:19.916448 run patchelf(pid=14459): Terminated: ok {rc=0} 08:03:19.949507 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=14456): Process ended prematurely: osmo-stp_10.42.42.5(pid=14456) [trial-2371↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14456)] [trial-2371↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38] 08:03:19.959232 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 08:03:20.022023 run osmo-hlr_10.42.42.2(pid=14453): ERR: Terminated: ERROR {rc=237} [trial-2371↪gprs:nanobts+band-900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14453)] 08:03:20.072809 run osmo-hlr_10.42.42.2(pid=14453): stdout: | (launched: 2022-12-10_08:03:16.488694) 08:03:20.124528 run osmo-hlr_10.42.42.2(pid=14453): stderr: | �[0;m�[1;31m20221210080316790 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210080316790 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210080316790 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210080316790 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210080316790 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210080316790 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210080316817 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2371/run.2022-12-10_06-54-20/gprs:nanobts+band-900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210080316839 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210080316840 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210080316840 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:03:20.168514 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14446): Terminating (SIGTERM) 08:03:20.210182 run iperf3-srv_10.42.42.10(pid=14447): Terminating (SIGTERM) 08:03:20.252044 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14448): Terminating (SIGTERM) 08:03:20.293527 run iperf3-srv_10.42.42.10(pid=14449): Terminating (SIGTERM) 08:03:20.335254 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14452): Terminating (SIGTERM) 08:03:20.376860 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14455): Terminating (SIGTERM) 08:03:20.418520 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14458): Terminating (SIGTERM) 08:03:20.428369 --- ParallelTerminationStrategy: PID 14446 died... 08:03:20.483781 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14446): Terminated: ok {rc=0} 08:03:20.494188 --- ParallelTerminationStrategy: PID 14447 died... 08:03:20.549312 run iperf3-srv_10.42.42.10(pid=14447): Terminated {rc=256} 08:03:20.559549 --- ParallelTerminationStrategy: PID 14448 died... 08:03:20.614654 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14448): Terminated: ok {rc=0} 08:03:20.624910 --- ParallelTerminationStrategy: PID 14449 died... 08:03:20.680099 run iperf3-srv_10.42.42.10(pid=14449): Terminated {rc=256} 08:03:20.690222 --- ParallelTerminationStrategy: PID 14452 died... 08:03:20.745243 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14452): Terminated: ok {rc=0} 08:03:20.755493 --- ParallelTerminationStrategy: PID 14455 died... 08:03:20.810943 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14455): Terminated: ok {rc=0} 08:03:20.821137 --- ParallelTerminationStrategy: PID 14458 died... 08:03:20.876844 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14458): Terminated: ok {rc=0} 08:03:20.963160 bus /gobi_0: Setting Powered False 08:03:22.069883 bus /gobi_0: Setting Powered False 08:03:23.177212 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14456): Process ended prematurely: osmo-stp_10.42.42.5(pid=14456) [trial-2371↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14456)]