Failed
gprs:trx-b200.ping.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=9822): Process ended prematurely: osmo-stp_10.42.42.5(pid=9822) [trial-2371↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9822)]
Standard Output
---------------------------------------------- trial-2371 gprs:trx-b200 ping.py ---------------------------------------------- 07:17:18.373325 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 07:17:18.384993 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 07:17:18.526110 tst ping.py: using LAC 26746 07:17:18.649289 tst ping.py: using RAC 226 07:17:18.771196 tst ping.py: using CellId 26746 07:17:18.897059 tst ping.py: using BVCI 26747 07:17:18.920676 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 07:17:18.931578 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 07:17:18.942502 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 07:17:18.953357 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 07:17:18.964011 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 07:17:18.974766 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 07:17:18.985658 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 07:17:18.996520 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 07:17:19.266288 tst ping.py:19: start network... 07:17:19.387459 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:17:19.842267 run create_hlr_db(pid=9816): Launched 07:17:20.009275 bus /gobi_6: Setting Powered False 07:17:21.042430 run create_hlr_db(pid=9816): Terminated: ok {rc=0} 07:17:21.455120 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9818): Launched 07:17:21.765912 run osmo-hlr_10.42.42.2(pid=9819): Launched 07:17:21.879714 run osmo-stp_10.42.42.5: Starting osmo-stp 07:17:22.421310 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9821): Launched 07:17:22.732072 run osmo-stp_10.42.42.5(pid=9822): Launched 07:17:22.844563 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:17:23.385672 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9824): Launched 07:17:23.495864 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:17:23.766645 run patchelf(pid=9825): Launched 07:17:23.948550 run osmo-stp_10.42.42.5(pid=9822): ERR: Terminated: ERROR {rc=1} [trial-2371↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9822)] 07:17:24.081923 run osmo-stp_10.42.42.5(pid=9822): stdout: | (launched: 2022-12-10_07:17:22.579794) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:17:24.215516 run osmo-stp_10.42.42.5(pid=9822): stderr: | �[0;m�[38;5;43m20221210071722772 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210071722772 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210071722772 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210071722772 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210071722773 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210071722773 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210071722773 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:17:24.344336 run osmo-stp_10.42.42.5(pid=9822): stdout: | (launched: 2022-12-10_07:17:22.579794) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:17:24.472039 run osmo-stp_10.42.42.5(pid=9822): stderr: | �[0;m�[38;5;43m20221210071722772 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210071722772 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210071722772 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210071722772 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210071722773 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210071722773 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210071722773 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:17:24.621054 run patchelf(pid=9825): Terminating (SIGINT) 07:17:24.795729 run patchelf(pid=9825): Terminated: ok {rc=0} 07:17:24.827565 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=9822): Process ended prematurely: osmo-stp_10.42.42.5(pid=9822) [trial-2371↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9822)] [trial-2371↪gprs:trx-b200↪ping.py:22] 07:17:24.836506 tst ping.py:22: Test FAILED (6.5 sec) 07:17:24.899131 run osmo-hlr_10.42.42.2(pid=9819): ERR: Terminated: ERROR {rc=237} [trial-2371↪gprs:trx-b200↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9819)] 07:17:24.950335 run osmo-hlr_10.42.42.2(pid=9819): stdout: | (launched: 2022-12-10_07:17:21.613729) 07:17:25.002558 run osmo-hlr_10.42.42.2(pid=9819): stderr: | �[0;m�[1;31m20221210071721812 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210071721812 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210071721812 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210071721812 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210071721812 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210071721812 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210071721825 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2371/run.2022-12-10_06-54-20/gprs:trx-b200/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210071721833 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210071721833 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210071721833 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:17:25.046881 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9818): Terminating (SIGTERM) 07:17:25.089566 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9821): Terminating (SIGTERM) 07:17:25.131588 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9824): Terminating (SIGTERM) 07:17:25.141337 --- ParallelTerminationStrategy: PID 9818 died... 07:17:25.197434 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9818): Terminated: ok {rc=0} 07:17:25.207635 --- ParallelTerminationStrategy: PID 9821 died... 07:17:25.263310 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9821): Terminated: ok {rc=0} 07:17:25.273544 --- ParallelTerminationStrategy: PID 9824 died... 07:17:25.329261 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9824): Terminated: ok {rc=0} 07:17:25.416539 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9822): Process ended prematurely: osmo-stp_10.42.42.5(pid=9822) [trial-2371↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9822)]