Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:sysmo.ping.py (from gprs_sysmo)

Failing for the past 42 builds (Since #2331 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=16964): Process ended prematurely: osmo-stp_10.42.42.5(pid=16964) [trial-2372↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16964)]

Standard Output

----------------------------------------------
trial-2372 gprs:sysmo ping.py
----------------------------------------------
08:27:13.693566 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
08:27:13.704930 tst                       gprs:sysmo: Using 1 x bts (candidates: 1)
08:27:13.836880 tst                          ping.py: using LAC 27119
08:27:13.965793 tst                          ping.py: using RAC 89
08:27:14.095130 tst                          ping.py: using CellId 27119
08:27:14.222305 tst                          ping.py: using BVCI 27120
08:27:14.247093 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
08:27:14.258136 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
08:27:14.269063 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
08:27:14.279857 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
08:27:14.290638 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
08:27:14.301397 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
08:27:14.312255 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
08:27:14.323499 tst                       gprs:sysmo: Using 1 x modem (candidates: 4)
08:27:14.616657 tst                       ping.py:19: start network...
08:27:14.751979 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
08:27:15.273255 run         create_hlr_db(pid=16958): Launched
08:27:15.461015 bus                          /gobi_6: Setting Powered False
08:27:16.490094 run         create_hlr_db(pid=16958): Terminated: ok {rc=0}
08:27:16.943320 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16960): Launched
08:27:17.282069 run   osmo-hlr_10.42.42.2(pid=16961): Launched
08:27:17.403648 run              osmo-stp_10.42.42.5: Starting osmo-stp
08:27:17.969377 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16963): Launched
08:27:18.293147 run   osmo-stp_10.42.42.5(pid=16964): Launched
08:27:18.410948 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
08:27:18.977927 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16966): Launched
08:27:19.092866 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
08:27:19.376310 run              patchelf(pid=16967): Launched
08:27:19.574944 run   osmo-stp_10.42.42.5(pid=16964): ERR: Terminated: ERROR {rc=1}  [trial-2372↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16964)]
08:27:19.711749 run   osmo-stp_10.42.42.5(pid=16964): stdout: 
| (launched: 2022-12-10_08:27:18.133323)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
08:27:19.848901 run   osmo-stp_10.42.42.5(pid=16964): stderr: 
| �[0;m�[38;5;43m20221210082718326 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210082718327 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210082718327 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210082718327 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210082718328 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210082718328 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210082718328 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
08:27:19.980780 run   osmo-stp_10.42.42.5(pid=16964): stdout: 
| (launched: 2022-12-10_08:27:18.133323)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
08:27:20.111964 run   osmo-stp_10.42.42.5(pid=16964): stderr: 
| �[0;m�[38;5;43m20221210082718326 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221210082718327 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221210082718327 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221210082718327 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221210082718328 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221210082718328 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221210082718328 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
08:27:20.264583 run              patchelf(pid=16967): Terminating (SIGINT)
08:27:20.444075 run              patchelf(pid=16967): Terminated: ok {rc=0}
08:27:20.476323 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=16964): Process ended prematurely: osmo-stp_10.42.42.5(pid=16964) [trial-2372↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16964)]  [trial-2372↪gprs:sysmo↪ping.py:22]
08:27:20.485393 tst                       ping.py:22: Test FAILED (6.8 sec)
08:27:20.547934 run   osmo-hlr_10.42.42.2(pid=16961): ERR: Terminated: ERROR {rc=237}  [trial-2372↪gprs:sysmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16961)]
08:27:20.599324 run   osmo-hlr_10.42.42.2(pid=16961): stdout: 
| (launched: 2022-12-10_08:27:17.111123) 
08:27:20.651583 run   osmo-hlr_10.42.42.2(pid=16961): stderr: 
| �[0;m�[1;31m20221210082717335 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221210082717335 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221210082717335 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221210082717335 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221210082717335 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221210082717335 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221210082717348 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2372/run.2022-12-10_08-20-36/gprs:sysmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221210082717357 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221210082717358 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221210082717358 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
08:27:20.695864 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16960): Terminating (SIGTERM)
08:27:20.737807 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16963): Terminating (SIGTERM)
08:27:20.779676 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16966): Terminating (SIGTERM)
08:27:20.789348 ---      ParallelTerminationStrategy: PID 16960 died...
08:27:20.845569 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16960): Terminated: ok {rc=0}
08:27:20.855661 ---      ParallelTerminationStrategy: PID 16963 died...
08:27:20.911498 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16963): Terminated: ok {rc=0}
08:27:20.921940 ---      ParallelTerminationStrategy: PID 16966 died...
08:27:20.978067 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16966): Terminated: ok {rc=0}
08:27:21.064873 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16964): Process ended prematurely: osmo-stp_10.42.42.5(pid=16964) [trial-2372↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16964)]