Failed
gprs:trx-lms-limenet-micro.iperf3.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=22402): Process ended prematurely: osmo-stp_10.42.42.5(pid=22402) [trial-2372↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22402)]
Standard Output
---------------------------------------------- trial-2372 gprs:trx-lms-limenet-micro iperf3.py ---------------------------------------------- 09:17:06.741197 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 09:17:06.752435 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 09:17:06.888031 tst iperf3.py: using LAC 27385 09:17:07.010396 tst iperf3.py: using RAC 100 09:17:07.132605 tst iperf3.py: using CellId 27385 09:17:07.255113 tst iperf3.py: using BVCI 27386 09:17:07.278667 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 09:17:07.289518 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 09:17:07.300021 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 09:17:07.311433 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 09:17:07.322581 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 09:17:07.333788 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 09:17:07.345227 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 09:17:07.356427 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 09:17:07.367734 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 09:17:07.649601 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 09:17:07.778128 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:17:08.098303 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22394): Launched 09:17:08.362058 run iperf3-srv_10.42.42.10(pid=22395): Launched 09:17:08.549467 tst iperf3.py:8: start network... 09:17:08.677642 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:17:09.159899 run create_hlr_db(pid=22396): Launched 09:17:09.336419 bus /gobi_6: Setting Powered False 09:17:10.358157 run create_hlr_db(pid=22396): Terminated: ok {rc=0} 09:17:10.790233 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22398): Launched 09:17:11.117970 run osmo-hlr_10.42.42.2(pid=22399): Launched 09:17:11.240782 run osmo-stp_10.42.42.5: Starting osmo-stp 09:17:11.808005 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22401): Launched 09:17:12.133523 run osmo-stp_10.42.42.5(pid=22402): Launched 09:17:12.257679 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:17:12.823756 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22404): Launched 09:17:12.940153 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:17:13.223785 run patchelf(pid=22405): Launched 09:17:13.413244 run osmo-stp_10.42.42.5(pid=22402): ERR: Terminated: ERROR {rc=1} [trial-2372↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22402)] 09:17:13.551879 run osmo-stp_10.42.42.5(pid=22402): stdout: | (launched: 2022-12-10_09:17:11.973845) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:17:13.691157 run osmo-stp_10.42.42.5(pid=22402): stderr: | �[0;m�[38;5;43m20221210091712167 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210091712167 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210091712167 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210091712168 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210091712170 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210091712170 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210091712170 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:17:13.825807 run osmo-stp_10.42.42.5(pid=22402): stdout: | (launched: 2022-12-10_09:17:11.973845) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:17:13.959247 run osmo-stp_10.42.42.5(pid=22402): stderr: | �[0;m�[38;5;43m20221210091712167 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210091712167 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210091712167 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210091712168 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210091712170 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210091712170 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210091712170 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:17:14.114345 run patchelf(pid=22405): Terminating (SIGINT) 09:17:14.297294 run patchelf(pid=22405): Terminated: ok {rc=0} 09:17:14.330428 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=22402): Process ended prematurely: osmo-stp_10.42.42.5(pid=22402) [trial-2372↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22402)] [trial-2372↪gprs:trx-lms-limenet-micro↪iperf3.py:8] 09:17:14.340112 tst iperf3.py:8: Test FAILED (7.6 sec) 09:17:14.402705 run osmo-hlr_10.42.42.2(pid=22399): ERR: Terminated: ERROR {rc=237} [trial-2372↪gprs:trx-lms-limenet-micro↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22399)] 09:17:14.453778 run osmo-hlr_10.42.42.2(pid=22399): stdout: | (launched: 2022-12-10_09:17:10.956532) 09:17:14.505393 run osmo-hlr_10.42.42.2(pid=22399): stderr: | �[0;m�[1;31m20221210091711155 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210091711155 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210091711155 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210091711155 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210091711155 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210091711155 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210091711168 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2372/run.2022-12-10_08-20-36/gprs:trx-lms-limenet-micro/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210091711178 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210091711178 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210091711178 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:17:14.549613 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22394): Terminating (SIGTERM) 09:17:14.591824 run iperf3-srv_10.42.42.10(pid=22395): Terminating (SIGTERM) 09:17:14.633474 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22398): Terminating (SIGTERM) 09:17:14.675209 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22401): Terminating (SIGTERM) 09:17:14.716904 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22404): Terminating (SIGTERM) 09:17:14.726767 --- ParallelTerminationStrategy: PID 22394 died... 09:17:14.782657 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22394): Terminated: ok {rc=0} 09:17:14.792997 --- ParallelTerminationStrategy: PID 22395 died... 09:17:14.848304 run iperf3-srv_10.42.42.10(pid=22395): Terminated {rc=256} 09:17:14.858460 --- ParallelTerminationStrategy: PID 22398 died... 09:17:14.913829 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22398): Terminated: ok {rc=0} 09:17:14.924034 --- ParallelTerminationStrategy: PID 22401 died... 09:17:14.979455 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22401): Terminated: ok {rc=0} 09:17:14.989650 --- ParallelTerminationStrategy: PID 22404 died... 09:17:15.045082 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22404): Terminated: ok {rc=0} 09:17:15.132003 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22402): Process ended prematurely: osmo-stp_10.42.42.5(pid=22402) [trial-2372↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22402)]