Failed
gprs:nanobts+band-900.ping_idle_ping.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=31657): Process ended prematurely: osmo-stp_10.42.42.5(pid=31657) [trial-2373↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31657)]
Standard Output
---------------------------------------------- trial-2373 gprs:nanobts+band-900 ping_idle_ping.py ---------------------------------------------- 10:58:28.409918 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 10:58:28.420932 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 10:58:28.555504 tst ping_idle_ping.py: using LAC 27920 10:58:28.674536 tst ping_idle_ping.py: using RAC 125 10:58:28.793392 tst ping_idle_ping.py: using CellId 27920 10:58:28.918997 tst ping_idle_ping.py: using BVCI 27921 10:58:28.943645 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 10:58:28.955102 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 10:58:28.966361 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 10:58:28.978754 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 10:58:28.990928 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 10:58:29.002462 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 10:58:29.014648 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 10:58:29.026741 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 10:58:29.305496 tst ping_idle_ping.py:24: start network... 10:58:29.428738 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:58:29.906644 run create_hlr_db(pid=31650): Launched 10:58:30.078910 bus /gobi_6: Setting Powered False 10:58:31.109109 run create_hlr_db(pid=31650): Terminated: ok {rc=0} 10:58:31.533239 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31653): Launched 10:58:31.933853 run osmo-hlr_10.42.42.2(pid=31654): Launched 10:58:32.044157 run osmo-stp_10.42.42.5: Starting osmo-stp 10:58:32.690277 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31656): Launched 10:58:33.008539 run osmo-stp_10.42.42.5(pid=31657): Launched 10:58:33.125498 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:58:33.682385 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31659): Launched 10:58:33.795870 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:58:34.071861 run patchelf(pid=31660): Launched 10:58:34.257941 run osmo-stp_10.42.42.5(pid=31657): ERR: Terminated: ERROR {rc=1} [trial-2373↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31657)] 10:58:34.394277 run osmo-stp_10.42.42.5(pid=31657): stdout: | (launched: 2022-12-10_10:58:32.852385) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:58:34.531067 run osmo-stp_10.42.42.5(pid=31657): stderr: | �[0;m�[38;5;43m20221210105833041 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210105833041 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210105833042 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210105833042 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210105833044 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210105833045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210105833045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:58:34.662476 run osmo-stp_10.42.42.5(pid=31657): stdout: | (launched: 2022-12-10_10:58:32.852385) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:58:34.792848 run osmo-stp_10.42.42.5(pid=31657): stderr: | �[0;m�[38;5;43m20221210105833041 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210105833041 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210105833042 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210105833042 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210105833044 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210105833045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210105833045 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:58:34.944563 run patchelf(pid=31660): Terminating (SIGINT) 10:58:35.123440 run patchelf(pid=31660): Terminated: ok {rc=0} 10:58:35.156351 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=31657): Process ended prematurely: osmo-stp_10.42.42.5(pid=31657) [trial-2373↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31657)] [trial-2373↪gprs:nanobts+band-900↪ping_idle_ping.py:27] 10:58:35.165620 tst ping_idle_ping.py:27: Test FAILED (6.7 sec) 10:58:35.229665 run osmo-hlr_10.42.42.2(pid=31654): ERR: Terminated: ERROR {rc=237} [trial-2373↪gprs:nanobts+band-900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31654)] 10:58:35.281244 run osmo-hlr_10.42.42.2(pid=31654): stdout: | (launched: 2022-12-10_10:58:31.688355) 10:58:35.333595 run osmo-hlr_10.42.42.2(pid=31654): stderr: | �[0;m�[1;31m20221210105832062 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210105832062 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210105832062 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210105832062 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210105832063 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210105832063 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210105832087 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2373/run.2022-12-10_09-48-07/gprs:nanobts+band-900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210105832099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210105832099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210105832100 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:58:35.378010 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31653): Terminating (SIGTERM) 10:58:35.420460 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31656): Terminating (SIGTERM) 10:58:35.462805 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31659): Terminating (SIGTERM) 10:58:35.472635 --- ParallelTerminationStrategy: PID 31653 died... 10:58:35.529096 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31653): Terminated: ok {rc=0} 10:58:35.539324 --- ParallelTerminationStrategy: PID 31656 died... 10:58:35.595496 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31656): Terminated: ok {rc=0} 10:58:35.605747 --- ParallelTerminationStrategy: PID 31659 died... 10:58:35.661404 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31659): Terminated: ok {rc=0} 10:58:35.749755 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31657): Process ended prematurely: osmo-stp_10.42.42.5(pid=31657) [trial-2373↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31657)]