Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=26761): Process ended prematurely: osmo-stp_10.42.42.5(pid=26761) [trial-2373↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26761)]
Standard Output
---------------------------------------------- trial-2373 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 10:03:51.565035 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:03:51.575796 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 10:03:51.719684 tst cs_paging_gprs_active.py: using LAC 27629 10:03:51.839113 tst cs_paging_gprs_active.py: using RAC 89 10:03:51.958431 tst cs_paging_gprs_active.py: using CellId 27629 10:03:52.076653 tst cs_paging_gprs_active.py: using BVCI 27630 10:03:52.099731 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:03:52.110582 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:03:52.121185 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:03:52.131726 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:03:52.142202 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:03:52.152721 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:03:52.163620 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:03:52.174098 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:03:52.184750 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 10:03:52.303739 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 10:03:52.597274 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 10:03:52.732420 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:03:53.066286 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26751): Launched 10:03:53.342836 run iperf3-srv_10.42.42.10(pid=26752): Launched 10:03:53.542248 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 10:03:53.677794 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:03:54.010798 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26753): Launched 10:03:54.286503 run iperf3-srv_10.42.42.10(pid=26754): Launched 10:03:54.484812 tst cs_paging_gprs_active.py:38: start network... 10:03:54.620186 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:03:55.124798 run create_hlr_db(pid=26755): Launched 10:03:55.310988 bus /gobi_6: Setting Powered False 10:03:56.331842 run create_hlr_db(pid=26755): Terminated: ok {rc=0} 10:03:56.757748 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26757): Launched 10:03:57.078004 run osmo-hlr_10.42.42.2(pid=26758): Launched 10:03:57.198245 run osmo-stp_10.42.42.5: Starting osmo-stp 10:03:57.758331 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26760): Launched 10:03:58.079453 run osmo-stp_10.42.42.5(pid=26761): Launched 10:03:58.196711 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:03:58.758758 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26763): Launched 10:03:58.873515 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:03:59.153147 run patchelf(pid=26764): Launched 10:03:59.342272 run osmo-stp_10.42.42.5(pid=26761): ERR: Terminated: ERROR {rc=1} [trial-2373↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26761)] 10:03:59.480448 run osmo-stp_10.42.42.5(pid=26761): stdout: | (launched: 2022-12-10_10:03:57.921832) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:03:59.619261 run osmo-stp_10.42.42.5(pid=26761): stderr: | �[0;m�[38;5;43m20221210100358114 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210100358115 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210100358115 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210100358115 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210100358116 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210100358116 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210100358116 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:03:59.752830 run osmo-stp_10.42.42.5(pid=26761): stdout: | (launched: 2022-12-10_10:03:57.921832) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:03:59.885183 run osmo-stp_10.42.42.5(pid=26761): stderr: | �[0;m�[38;5;43m20221210100358114 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210100358115 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210100358115 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210100358115 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210100358116 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210100358116 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210100358116 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:04:00.039843 run patchelf(pid=26764): Terminating (SIGINT) 10:04:00.222126 run patchelf(pid=26764): Terminated: ok {rc=0} 10:04:00.255428 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=26761): Process ended prematurely: osmo-stp_10.42.42.5(pid=26761) [trial-2373↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26761)] [trial-2373↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 10:04:00.265132 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 10:04:00.328203 run osmo-hlr_10.42.42.2(pid=26758): ERR: Terminated: ERROR {rc=237} [trial-2373↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26758)] 10:04:00.379196 run osmo-hlr_10.42.42.2(pid=26758): stdout: | (launched: 2022-12-10_10:03:56.920941) 10:04:00.432121 run osmo-hlr_10.42.42.2(pid=26758): stderr: | �[0;m�[1;31m20221210100357119 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210100357119 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210100357119 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210100357119 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210100357119 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210100357119 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210100357132 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2373/run.2022-12-10_09-48-07/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210100357140 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210100357140 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210100357140 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:04:00.476516 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26751): Terminating (SIGTERM) 10:04:00.518967 run iperf3-srv_10.42.42.10(pid=26752): Terminating (SIGTERM) 10:04:00.560808 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26753): Terminating (SIGTERM) 10:04:00.602473 run iperf3-srv_10.42.42.10(pid=26754): Terminating (SIGTERM) 10:04:00.644882 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26757): Terminating (SIGTERM) 10:04:00.686881 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26760): Terminating (SIGTERM) 10:04:00.728736 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26763): Terminating (SIGTERM) 10:04:00.738377 --- ParallelTerminationStrategy: PID 26751 died... 10:04:00.794359 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26751): Terminated: ok {rc=0} 10:04:00.804231 --- ParallelTerminationStrategy: PID 26752 died... 10:04:00.860264 run iperf3-srv_10.42.42.10(pid=26752): Terminated {rc=256} 10:04:00.870760 --- ParallelTerminationStrategy: PID 26753 died... 10:04:00.932860 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26753): Terminated: ok {rc=0} 10:04:00.943104 --- ParallelTerminationStrategy: PID 26754 died... 10:04:00.998963 run iperf3-srv_10.42.42.10(pid=26754): Terminated {rc=256} 10:04:01.009189 --- ParallelTerminationStrategy: PID 26757 died... 10:04:01.065464 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26757): Terminated: ok {rc=0} 10:04:01.075746 --- ParallelTerminationStrategy: PID 26760 died... 10:04:01.131849 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26760): Terminated: ok {rc=0} 10:04:01.142350 --- ParallelTerminationStrategy: PID 26763 died... 10:04:01.198755 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26763): Terminated: ok {rc=0} 10:04:01.287038 bus /gobi_0: Setting Powered False 10:04:02.389189 bus /gobi_0: Setting Powered False 10:04:03.500387 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26761): Process ended prematurely: osmo-stp_10.42.42.5(pid=26761) [trial-2373↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26761)]